Ford E-150 Econoline Differential Replacement

Dana 25/27/30/44/50 Dana 44~Dana 44; 19 Spline~Inner slinger

Dana 30/44 Reverse Dana 44~Dana 44; 19 Spline~Outer slinger

8 in.; 9 in. 10 bolt Ford 9 in.

9 in. 10 Bolt; 8 in. Ford 9 in.

9 in./7.5in./8.8 in. 10 Bolt Ford 9 in.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 44; Bulkhead Quick-Disconnect Fitting

31 Spline; Rear 9.0 in.; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio

9 in. 10 Bolt; Nodular Iron; 3.062 in.; HD Ford 9 in.; Nodular Iron; 3.062 in.; HD

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.

8.8 in. 10 Bolt; 31 Spline; w/Carbon Fiber Clutches Ford 8.8 in.; 31 Spline; w/Carbon Fiber Clutches

9 in. 10 Bolt; Aluminum Case; 3.062 in.; HD Ford 9 in.; Aluminum Case; 3.062 in.; HD

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up Dana 44; 19 Spline; 30 Spline; 3.92 And Up~Dana 44; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio; Rear 9 in.

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

Duragrip; 31 Spline Ford 8.8 in.; Duragrip; 31 Spline~Yukon Dura Grip Positraction; Ford 8.8 in. Rear; 31 Spline; Limited Slip

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 19 Spline; 30 Spline; 3.73 And Down~Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

9 in.; Race; 31 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit; Will Chatter Ford 9 in.; Race; 31 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit; Will Chatter~Yukon Dura Grip; Ford 9 in. Rear; 31 Spline; Limited Slip; 4 Spring Aggressive Setup; May Chatter; Requires Longer Trac-Loc Bolts; 1.78 in. Bearing Journals

Race; 28 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit; Will Chatter Ford 9 in.; Race; 28 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit; Will Chatter~Yukon Dura Grip; Ford 9 in. Rear; 28 Spline; Limited Slip; 4 Spring Aggressive Setup; May Chatter; Requires Longer Trac-Loc Bolts; 1.78 in. Bearing Journals

Race; For Use w/2 Light Springs; 31 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit Ford 9 in.; Race; For Use w/2 Light Springs; 31 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit~Yukon Dura Grip; Ford 9 in. Rear; 31 Spline; Limited Slip; 2 Spring Smooth Setup; Requires Longer Trac-Loc Bolts; 1.78 in. Bearing Journals

Race; For Use w/2 Light Springs; 28 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit Ford 9 in.; Race; For Use w/2 Light Springs; 28 Spline; Requires Trac-Loc Bolts/Yukon Master Overhaul Kit~Yukon Dura Grip; Ford 9 in. Rear; 28 Spline; Limited Slip; 2 Spring Smooth Setup; Requires Longer Trac-Loc Bolts; 1.78 in. Bearing Journals

37 Spline; 1.60 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 80

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

35 Spline Ford 9 in.; 35 spline~Ford 9 in.; Yukon Grizzly Locker; 35 Spline; 2.000 in. Diameter Bearing Journals

9 in. 10 Bolt; 31 Spline Ford 9 in.; 31 spline~Ford 9 in.; Yukon Grizzly Locker; 31 Spline; 1.783 in. Diameter Bearing Journals

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

9 in.; 28 Spline Ford 9 in.; 28 Spline~Ford 9 in.; Yukon Grizzly Locker; 28 Spline; 1.783 in. Diameter Bearing Journals

9 in. Ford 31 Spline Ford 9 in.~Ford 9 in.; 31 spline~Ford 9 in.; 31 spline; Fits 2.89 in. and 3.06 in. Dropout

35 Spline; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio; Dana 80; Rear Dana 80

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in.

9.75 in. 12 Bolt; 34 Spline Axles Ford 9.75 in.; 34 Spline Axles~Yukon Dura Grip Positraction; Ford 9.75 in. Rear; Limited Slip; 34 Spline

9 in. 10 Bolt; Ford 9 in.; 31 Spline Axles; Fits Load Bolt Housing Ford 9 in.; 31 Spline Axles; Fits Load Bolt Housing~Ford 9 in.; Yukon Grizzly Locker; 31 Spline; 1.783 in. Diameter Bearing Journals; Fits Load Bolt Housing

35 Spline; Use w/Load Bolt Dropout Ford 9 in.; 35 Spline; Use w/Load Bolt Dropout~Ford 9 in.; Yukon Grizzly Locker; 35 Spline; 2.000 in. Diameter Bearing Journals; Fits Load Bolt Dropout

30 Spline; 3.73 And Down Dana 44; 19 Spline; 30 Spline; 3.73 And Down~Dana 44; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

30 Spline; 3.92 And Up; Dana 44; Front and Rear

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

8.8 in. 10 Bolt; 31 Spline; Rear Ford 8.8 in.; 31 Spline; Rear~Ford 8.8 in. Rear; Yukon Grizzly Locker; 31 Spline; .875 in. Diameter Cross Pin

35 Spline; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio; Rear Dana 80

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down

34 Spline; 1.37 in. Axle Shaft Diameter; Rear 9.75 in.; All Ratios

35 Spline; Racing Design Ford 9 in.; 35 Spline; Racing Design~Ford 9 in.; Yukon Grizzly Locker; 35 Spline; Racing Design; 2.000 in. Diameter Bearing Journals

35 Spline; Racing Design; Use w/Load Bolt Dropout Ford 9 in.; 35 Spline; Racing Design; Use w/Load Bolt Dropout~Ford 9 in.; Yukon Grizzly Locker; 35 Spline; Racing Design; 2.000 in. Diameter Bearing Journals; Fits Load Bolt Dropout

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 70HD; Rear Dana 70 Use Detroit Locker PN[225S18] If 2 Piece; PN[225SL58A/B/C/D] If One Piece

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

9 in. Ford; 35 Spline Ford 9 in.; 35 spline~Ford 9 in.; 35 spline; Fits 3.250 in. Dropout

31 Spline; Racing Design Ford 9 in.; 31 Spline; Racing Design~Ford 9 in.; Yukon Grizzly Locker; 31 Spline Racing Design; 2.000 in. Diameter Bearing Journals

Axle: DANA 44 Shaft: 1.31" Spline: 30 Ratio: 3.73 and down Confirm axle is D44

Axle: Ford 8.8 Shaft: 1.32" Spline: 31 Ratio: All Confirm axle is 8.8"

Axle: Ford 9" Shaft: 1.32" Spline: 31 Ratio: All

Axle: DANA 44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up Confirm axle is D44

Axle: Ford 8.8 IFS Shaft: 1.20" Spline: 28 Ratio: All

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 19 Spline; 30 Spline; 3.92 Ratio And Up~Dana 44; 30 Spline; 3.92 Ratio And Up

30 Spline; 3.73 Ratio And Down Dana 44; 19 Spline; 30 Spline; 3.73 Ratio And Down~Dana 44; 30 Spline; 3.73 Ratio And Down

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Ford 9 in.; 3.70 Ratio; 31 Spline; Nodular Iron; Bare; Std Carrier; w/o Yoke without Limited Slip Differential

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Axle: 9.75 Inch Position: Rear Shaft: 1.37 Inch Spline: 34 Ratio: All Confirm axle is 9.75 Inch

Axle: Sterling 10.25"/10.50" Shaft: 1.50" Spline: 35 Ratio: All Confirm axle is Sterling 10.25"/10.5"

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 28 Spline; Can Be Used w/IFS And IRS 8.8 in. (10 Bolt)

Ford 9 in.; 3.70 Ratio; 31 Spline; Nodular Iron; Bare; w/ Trac-Lok Posi; w/o Yoke w/ Limited Slip Trac-Lok Differential

Ford 9 in.; 4.56 Ratio; 31 Spline; Nodular Iron; Bare; w/ Grizzly Locker; w/o Yoke w/ 31 Spline Mechanical Locker

Ford 9 in.; 3.50 Ratio; 31 Spline; Nodular Iron; Bare; w/ Grizzly Locker; w/o Yoke w/ 31 Spline Mechanical Locker

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.10 Gear Ratio Up

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline 8.8 in. (10 Bolt)

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Ford 9 in.; 4.11 Ratio; 31 Spline; Nodular Iron; Bare; w/ Grizzly Locker; w/o Yoke w/ 31 Spline Mechanical Locker

Open To Lock; Dana 70; 35 Spline; 4.56 Gear Ratio Down

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter