Ford E-250 Econoline Club Wagon Differential Replacement

31 Spline; Rear 9.0 in.; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio; Rear 9 in.

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in.

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

30 Spline; 3.92 And Up; Dana 44; Front and Rear

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 70HD; Rear Dana 70 Use Detroit Locker PN[225S18] If 2 Piece; PN[225SL58A/B/C/D] If One Piece

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

Axle: Ford 8.8 Shaft: 1.32" Spline: 31 Ratio: All

Axle: Ford 9" Shaft: 1.32" Spline: 31 Ratio: All

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Axle: Sterling 10.25"/10.50" Shaft: 1.50" Spline: 35 Ratio: All

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.10 and down Confirm axle is not c-clip

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is not full float

Axle: Dana 60 Shaft: 1.31" Spline: 30 Ratio: 4.56 and up Confirm axle spline count

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.10 and down Confirm axle is not full float

Axle: Dana 60 Shaft: 1.31" Spline: 30 Ratio: 4.10 and down Confirm axle spline count

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is not c-clip

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 28 Spline; Can Be Used w/IFS And IRS 8.8 in. (10 Bolt)

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.10 Gear Ratio Up

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline 8.8 in. (10 Bolt)

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.56 Gear Ratio Down

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter