Ford E-350 Econoline Differential Replacement

Dana 80 Dana 80

Dana 60/70/70U/70HD Dana 60~Dana 70~Outer slinger; 2.250 in. O.D.

Dana 70 Dana 70~Inner slinger

9 in./7.5in./8.8 in. 10 Bolt Ford 10.25 in.

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 60; Bulkhead Quick-Disconnect Fitting

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60~Dana 70

31 Spline; Rear 9.0 in.; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 3.25 And Up Ring Gear Pinion Ratio; Rear 9 in.

37 Spline; 1.60 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 80

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

37 Spline; Dana 80; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio Will Fit OE 3.73 Thin Gear Sets[Ford D80] Only

35 Spline; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio; Dana 80; Rear Dana 80

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in.

Dana 60 Rear; 32 spline; Full Float Axle. 4.10 and Down Ratio~Yukon Dura Grip positraction; Dana 60 Rear; 32 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 30 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.10 and Down Ratio or Thick Gears

Dana 60; 30 Spline; 4.56 And Up~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.56 and Up Ratio

Dana 60 Rear; 32 spline; Full Float Axle. 4.56 and Up Ratio~Yukon Dura Grip Positraction; Dana 60 Rear; 32 spline; Full Float Axle. 4.56 and Up Ratio

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

30 Spline; 4.10 And Down Dana 60; 30 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.56 And Up Dana 60; 30 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.56 And Up; w/ Full Float Axle

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

35 Spline; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio; Rear Dana 80

Yukon Dura Grip positraction for Dana 70; 4.10 to 7.17 ratio; fits 35 spline axles~Yukon Dura Grip Positraction; Dana 70 Rear; 35 spline; 4.10 and down ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down

34 Spline; 1.37 in. Axle Shaft Diameter; Rear 9.75 in.; All Ratios

10.25 in. 12 Bolt; 35 Spline Ford 10.25 in.; 35 Spline~Ford 10.25 in.; Full Float Rear; Yukon Grizzly Locker; 35 Spline;

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 70HD; Rear Dana 70 Use Detroit Locker PN[225S18] If 2 Piece; PN[225SL58A/B/C/D] If One Piece

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

Yukon Dura Grip positraction for Dana 80; 37 spline axles; 4.10 and up ratios~Yukon Dura Grip Positraction; Dana 80 Rear; 37 spline; 4.10 and up ratios

Yukon Dura Grip positraction for Dana 70; 32 spline axles; 4.10 and down ratios~Yukon Dura Grip Positraction; Dana 70 Rear; 32 spline; 4.10 and down ratios

Yukon Dura Grip positraction for Dana 80; 35 spline axles; 3.73 and down ratios~Yukon Dura Grip Positraction; Dana 80 Rear; 35 spline; 3.73 and down ratios

Yukon Dura Grip positraction for Dana 80; 37 spline axles; 3.73 and down ratios~Yukon Dura Grip Positraction; Dana 80 Rear; 37 spline; 3.73 and down ratios

Yukon Dura Grip positraction for Dana 80; 35 spline axles; 4.10 and up ratios~Yukon Dura Grip Positraction; Dana 80 Rear; 35 spline; 4.10 and up ratios

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Axle: Dana 60 Shaft: 1.41" Spline: 32 Ratio: 4.10 and down Confirm axle spline count

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.10 and down Confirm axle is not c-clip

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is not full float

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is not c-clip

Axle: Sterling 10.25"/10.50" Shaft: 1.50" Spline: 35 Ratio: All

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.10 and down Confirm axle is not full float

Axle: Dana 60 Shaft: 1.31" Spline: 30 Ratio: 4.56 and up Confirm axle spline count

Axle: Dana 60 Shaft: 1.31" Spline: 30 Ratio: 4.10 and down Confirm axle spline count

Axle: Dana 60 Shaft: 1.41" Spline: 32 Ratio: 4.56 and up Confirm axle spline count

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

30 Spline; 4.56 Ratio And Up Dana 60; 30 Spline; 4.56 Ratio And Up

10.25 in. 12 Bolt; 35 Spline Ford 10.25 in.; 35 Spline

30 Spline; 4.10 Ratio And Down Dana 60; 30 Spline; 4.10 Ratio And Down

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

Axle: Dana 80 Shaft: 1.60" Spline: 37 Ratio: 4.10 and up Confirm axle spline count. Some 3.73 gears are thin and require 4.10 up case

Axle: Dana 80 Shaft: 1.60" Spline: 37 Ratio: 3.73 and down Confirm axle spline count. Some 3.73 gears are thin and require 4.10 up case

Axle: Dana 70 Shaft: 1.41" Spline: 32 Ratio: 4.56 and up Confirm axle spline count. Confirm axle is 70 not 60

Axle: Dana 70 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle spline count. Confirm axle is 70 not 60

Axle: Dana 80 Shaft: 1.50" Spline: 35 Ratio: 3.73 and down Confirm axle spline count. Some 3.73 gears are thin and require 4.10 up case

Axle: Dana 70 Shaft: 1.41" Spline: 32 Ratio: 4.10 and down Confirm axle spline count. Confirm axle is 70 not 60

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.10 Gear Ratio Up

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.56 Gear Ratio Down

Open To Lock; Dana 80; 35 Spline; 4.10 Gear Ratio Up

Open To Lock; Dana 80; 35 Spline; 3.73 Gear Ratio down

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter