Ford E-350 Econoline Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head~Dana 70; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

One Bearing; Chrysler 8.75 in; 42 Case Housing; 1.75in. Pinion Shaft Dia; No Return Dana 70 U

Works w/Most Differentials Ford 10.25 in.; Carrier shim driver kit

One Bearing; Ford 10.25 in.; No Return Ford 10.25 in.

10.25 in. 12 Bolt; Standard Ford 10.25 in.; Standard

Case Split 4.56 And Up with Dana 60 Axle with Empty Case

For Use w/Dana Spicer 60 Dana 60

For Use w/Dana Spicer 80 Dana 80

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

with Open Differential Case Split 4.56 And Up with 35 Splines with Dana 70HD Axle

Dana 70; Replacement; Standard; 4.56 And Up Carrier Break Dana 70; Replacement; Standard; 4.56 And Up Carrier Break

Dana 60

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

Dana 70; Standard; 4.10 And Down Carrier Break; ABS Compatible Dana 70; Standard; 4.10 And Down Carrier Break; ABS Compatible

with Dana Model 60 Axle with Limited Slip Differential Case Split 4.10 And Down Except without Spider Gears Replaces OE Part Number(s) EU9Z-4204-D

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

Dana 70; Standard; 32 Spline; 4.10 And Down Carrier Break; Narrow For 70-2U Dana 70 U; Standard; 32 Spline; 4.10 And Down Carrier Break; Narrow For 70-2U

Dana 70; Replacement; Standard; 4.56 And Up Carrier Break; For HD Rear End Dana 70 HD; Replacement; Standard; 4.56 And Up Carrier Break; For HD Rear End

with Open Differential Case Split 4.10 And Down with 35 Splines with Dana 70U Axle

Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 35 Splines with Dana 60 Axle with Spider Gears

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible

Dana 70; Standard; 4.56 And Up Carrier Break; ABS Compatible Dana 70; Standard; 4.56 And Up Carrier Break; ABS Compatible

Dana 70; Standard; 4.10 And Down Carrier Break Dana 70 U; Standard; 4.10 And Down Carrier Break

with Spider Gears Replaces OE Part Number(s) F7UZ-4026-AA with Dana 60 Rear Axle with Limited Slip Differential

with Empty Case with Ford 10.25 & 10.5 Axles

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

Dana 70; Power Lok; 4.10 And Down Carrier Break Dana 70 HD; Power Lok; 4.10 And Down Carrier Break

with 4.56 or Lower Rear Axle Ratio with Dana 70 Axle with 35 Spline Teeth with Spider Gears without Limited Slip Differential

with Dana 70 Axle with Differential Bearings with Spider Gears Case Split 3.73 And Down Except without Differential Bearings and Shims with 32 Splines with Full Float with Limited Slip Differential

with Limited Slip Differential with Spider Gears Case Split 4.10 And Down Replaces OE Part Number(s) E9UZ-4026-A with Dana Model 60 Axle

with Loaded Open Case with 3.73 Gear Ratio and Up with 35 Splines with Dana 80 Axle

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 32 Splines with Dana 60 Axle

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with Open Differential Case Split 4.10 And Down with 35 Spline Teeth with Dana Model 70 Axle

Dana 70; Power Lok; 4.10 And Down Carrier Break; ABS Compatible Dana 70; Power Lok; 4.10 And Down Carrier Break; ABS Compatible

with Open Differential Case Split 4.56 And Up with 35 Splines with Dana 70 Axle

Dana 70; 32 spline; 4.10 and down ratios

Dana 80; 35 Spline; 4.10 And Up; non-ABS Dana 80; 35 Spline; 4.10 And Up; non-ABS

with Standard Differential with 37 Spline Teeth with 4.10 or Higher Rear Axle Ratio with Dana 80 Axle

with Full Float with Single Rear Wheels (SRW) Case Split 4.10 And Down with 30 Splines with Dana 60 Axle with Trac Lok

with Differential Bearings and Shims with Full Float Case Split 3.73 And Down with 32 Splines with Dana 70 Axle with Limited Slip Differential with Spider Gears

with Loaded Limited Slip Case Case Split 4.10 And Up with 37 Splines with Dana 80 Axle

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle

with Standard Differential with 3.73 and Down Gear Ratio with 35 Spline Teeth with Dana 80 Axle

with Power-Lok Case Split 4.10 And Down with 35 Splines with Dana 70HD Axle

with Power Lok Case Split 4.56 And Up with 35 Splines with Dana 70 Axle

with Open Differential Case Split 4.56 And Down with 35 Splines with Dana 70 Axle

with Power-Lok Case Split 4.10 And Down with 35 Splines with Dana 70 Axle