Ford E-350 Econoline Drive Shaft Center Support Bearing Replacement

with 1.3780in & 35mm Inside Diameter Bearing(s) 2.28in Center Line Of Bearing To Mounting Face 58mm Center Line Of Bearing To Mounting Face with 168mm Mounting with 6.62in Mounting with Spicer Series 1280, 1310, 1410 accepted Slip Yoke Style

with 1.5750in & 40mm Inside Diameter Bearing(s) 2.48in Center Line Of Bearing To Mounting Face 63mm Center Line Of Bearing To Mounting Face with U-Shaped Bracket with 168mm Mounting with 6.62in Mounting with Dust Shields with Spicer Series 1480, 1550 accepted

without Mounting Studs with 1.5750in & 40mm Inside Diameter Bearing(s) 2.28in Center Line Of Bearing To Mounting Face 58mm Center Line Of Bearing To Mounting Face with Mounting Holes with 168mm Mounting with 6.62in Mounting with Cleveland O Shaft

Spicer 1310, 1330 Series 1.3780" Bearing I.D. Slip Yoke Style Without slingers

FAG Global Number 713 0158 100 w/o Slinger 2.3" Ctr Hght, 1.57" I.D. w/o Slngr Bearing Lenght 34,1310-1550 Series U-Joints

Replaces OE Part Number(s) F2TZ-4800-A, F81Z-4800-CA with 1.378in Bearing I.D.

Spicer Series 2.3622" Bearing I.D.

Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D. Bearing Assembly

FAG Global Number 713 0152 100

Slip Yoke Style with 1.378 (in) Bearing Inside Diameter with 35 (mm) Bearing Inside Diameter with Spicer 1310,1330 U-Joint(s)

Spicer 1260, 1280, 1310, 1410, 1480 - 1.38 in. I.D. Bearing Only

Replaces OE Part Number(s) F2TZ-4800-A, F81Z-4800-CA with 1.378in Bearing I.D.

Spicer 1410, 1480 - 1.57 in. I.D. - 2.5 in. Height Bearing Assembly

Cleveland 055 - 1.57 in. 40mm I.D. - 2.25 in. Height

Spicer 1410, 1480 - 1.57 in. I.D. - 2.5 in. Height Bearing Only

Spicer 1480 - 1.57 in., 40mm I.D. Bearing Assembly

Replaces OE Part Number(s) E4TZ-4800-A with 1.574in Bearing I.D. and Rubber Cushion Number 231212

Bracket Width Of 1.768in Replaces OE Part Number(s) E7TZ-4800-A with 1.574in Bearing I.D.

Spicer 1410, 1650 - 1.77 in. I.D. Bearing Assembly

Replaces OE Part Number(s) E4TZ-4800-A with 1.574in Bearing I.D. and Rubber Cushion Number 231212

Spicer - 2.36 in. I.D.

40mm ID - 22mm Width - 57.2mm Centerline Height - 168.2mm Bolt Hole Center - 2 Slingers

FAG Global Number 713 0162 100 1.5748" I.D. w/ 2 Slingers