Ford E-350 Econoline Electric Fuel Pump Replacement

Rear Tank Can Only Be Used If The Original Ford Module Has Been Replaced Plastic Module Height Is Approx. 4" When Replacing The Pump Only Both Strainers Are Required Includes Tank Seal Strainer required to validate the warranty: F316S, F300S

Center Tank In-Tank Pump Low Pressure Pump Includes Tank Seal Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally Strainer required to validate the warranty: F123S

Includes Tank Seal Strainer required to validate the warranty: F298S, F276S

With 3 tube ports. . After Axle FuelTank

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

2 Pump System Requires In-Tank & In-Line Pump with 20 or 22 Gallon Tank

Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty

Strainer required to validate the warranty: F111S

Universal 12 Volt 5 to 9 pounds of pressure. Requires 3" x 5" Mounting Area

Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty

Supersedes 525-1031 Can use 525-1031

To be used with OE Style Modules only

With 22 gallon tank

Stripped chassis. With 30 or 40 gallon tank.

with Wide Terminals Platinum Pro Part New Strainer Required For Warranty

With 2 tube ports

Externally Mounted High Pressure Pump Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

(Universal Inline) (12 Volt 4 to 6 PSI) Requires 3" x 6" Mounting Area

Platinum Pro Part New Strainer Required For Warranty

Frame Mounted Supply Pump with Electric Pump From 1/12/98

Externally Mounted High Pressure Pump Two Fuel Pumps May Be Required, One Mounted In-Tank Pump and One Mounted Externally

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

with Aft Axle Tank with Midship Tank Used to Service Modules With Ford OEM Module Style Connector

Externally mounted Electric fuel pump

Platinum Pro Part New Strainer Required For Warranty

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

Electric Replacement for Mechanical When converting from OE mechanical pump to inline electric system an additional inline fuel pressure regulator may be required to maintain proper line pressure

externally mounted; Platinum Pro Part 2 Fuel Pumps may be Required

Can only be used w/o OEM Ford Module

Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty

To be used with OE Style Modules only

2 Fuel Pumps may be Required - 1 Externally Mounted & 1 Mounted In Tank

Aft Axle Fuel Tank DENSO Fuel Pump

with Aft Axle Tank with Midship Tank Used to Service Modules With Ford OEM Module Style Connector

From 01/1998 without Plate Replacement

with Aft Axle Tank

Aft Axle Fuel Tank, In Tank Assy.

External Pump