Ford Expedition Differential Replacement

9 in./7.5in./8.8 in. 10 Bolt Ford 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 7.5 in.

34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.

8.8 in. 10 Bolt; 31 Spline; w/Carbon Fiber Clutches Ford 8.8 in.; 31 Spline; w/Carbon Fiber Clutches

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

Duragrip; 31 Spline Ford 8.8 in.; Duragrip; 31 Spline~Yukon Dura Grip Positraction; Ford 8.8 in. Rear; 31 Spline; Limited Slip

Duragrip; 28 Spline Ford 8.8 in.; Reverse; Duragrip; 28 Spline~Yukon Dura Grip Positraction / Limited Slip; Ford 8.8 in.; Reverse Front; 28 Spline

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in.

9.75 in. 12 Bolt; 34 Spline Axles Ford 9.75 in.; 34 Spline Axles~Yukon Dura Grip Positraction; Ford 9.75 in. Rear; Limited Slip; 34 Spline

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

28 Spline; 1.20 in. Axle Shaft Diameter; 7.5 in.; All Ratios

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

8.8 in. 10 Bolt; 28 Spline Ford 8.8 in.; Reverse Front; Yukon Grizzly Locker; 28 Spline; .750 in. Diameter Cross Pin~Ford 8.8 in.; Reverse; 28 Spline; Rear

8.8 in. 10 Bolt; 31 Spline Ford 8.8 in. Rear; Yukon Grizzly Locker; 31 Spline; .875 in. Diameter Cross Pin~Ford 8.8 in.; 31 Spline; Rear

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

34 Spline; 1.37 in. Axle Shaft Diameter; Rear 9.75 in.; All Ratios

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

Axle: Ford 8.8 Shaft: 1.32" Spline: 31 Ratio: All Confirm axle is 8.8"

Axle: 9.75 Inch Position: Rear Shaft: 1.37 Inch Spline: 34 Ratio: All Confirm axle is 9.75 Inch

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 28 Spline; Can Be Used w/IFS And IRS 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline; For Use w/IRS Only 8.8 in. (10 Bolt)