Ford Expedition Differential Bearing Kit Replacement

For Ford 8.8", GM 8.875"; Includes Timken Bearings, Bearing Races

For Ford 8.8" (10 Bolt); Solid Axle; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 8.8" (10 Bolt); Solid Axle; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Standard Design; 8.8 In. Ring Gear wo/Intermediate Axle Bearings

For Ford 8.8" (10 Bolt); Solid Axle; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" (10 Bolt); Solid Axle; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 8.8" IFS; Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread Locking Compound

For Ford 8.8" (10 Bolt); Solid Axle; 2.5" OD Wheel Bearing (6408); Super Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" IFS; Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Axle, Pinion), and Thread Locking Compound

For Ford 8.8" (10 Bolt); Solid Axle; 2.5" OD Wheel Bearing (6408); Super Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" (10 Bolt); IRS; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 8.8" IFS; Master Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" (10 Bolt); Solid Axle; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" (10 Bolt); IRS; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" (10 Bolt); IRS; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" IFS; Master Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Ford 8.8" (10 Bolt); IRS; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 8.8" IFS; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Improved Design; 8.8 In. Ring Gear wo/Intermediate Axle Bearings

For Ford 9.75" (12 Bolt); Up To 1999.5; 2.6875" OD Outer Pinion Cup; Uses M88048 / M88010 Outer Pinion Bearing; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); This Bearing and Seal Master Kit Will Fit All Ford 9.75" Housings From 1999.5 Through 2010. From 2007 Bearing Part Numbers May Be Different. In 2007 and Later Model Housings The Original Equipment Carrier Bearings, As Well As The Inner Pinion Bearing And Race, May Be Different From The Part Numbers That You Will Recieve In This Kit. This Is Not An Error. The Part Numbers In This Kit Will Directly Replace Those Numbers; Carrier Bearings NP372019 - NP343847 Replace NP847706 - NP912771; Inner Pinion Bearings NP434567 - NP576375 Replace NP665996 - NP244986; Outer Pinion Bearings HM89411 - HM89443 Replace KEST3376LFT; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); This Bearing and Seal Master Kit Will Fit All Ford 9.75" Housings From 1999.5 Through 2010. From 2007 Bearing Part Numbers May Be Different. In 2007 and Later Model Housings The Original Equipment Carrier Bearings, As Well As The Inner Pinion Bearing And Race, May Be Different From The Part Numbers That You Will Recieve In This Kit. This Is Not An Error. The Part Numbers In This Kit Will Directly Replace Those Numbers; Carrier Bearings NP372019 - NP343847 Replace NP847706 - NP912771; Inner Pinion Bearings NP434567 - NP576375 Replace NP665996 - NP244986; Outer Pinion Bearings HM89411 - HM89443 Replace KEST3376LFT; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Up To 1999.5; 2.6875" OD Outer Pinion Cup; Uses M88048 / M88010 Outer Pinion Bearing; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Conversion For 1997-2010 RP With 2011+ Housing; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Conversion For 1997-2010 RP With 2011+ Housing; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Up To 1999.5; 2.6875" OD Outer Pinion Cup; Uses M88048 / M88010 Outer Pinion Bearing; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); This Bearing and Seal Master Kit Will Fit All Ford 9.75" Housings From 1999.5 Through 2010. From 2007 Bearing Part Numbers May Be Different. In 2007 and Later Model Housings The Original Equipment Carrier Bearings, As Well As The Inner Pinion Bearing And Race, May Be Different From The Part Numbers That You Will Recieve In This Kit. This Is Not An Error. The Part Numbers In This Kit Will Directly Replace Those Numbers; Carrier Bearings NP372019 - NP343847 Replace NP847706 - NP912771; Inner Pinion Bearings NP434567 - NP576375 Replace NP665996 - NP244986; Outer Pinion Bearings HM89411 - HM89443 Replace KEST3376LFT; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Conversion For 1997-2010 RP With 2011+ Housing; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Conversion For 1997-2010 RP With 2011+ Housing; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); Up To 1999.5; 2.6875" OD Outer Pinion Cup; Uses M88048 / M88010 Outer Pinion Bearing; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); This Bearing and Seal Master Kit Will Fit All Ford 9.75" Housings From 1999.5 Through 2010. From 2007 Bearing Part Numbers May Be Different. In 2007 and Later Model Housings The Original Equipment Carrier Bearings, As Well As The Inner Pinion Bearing And Race, May Be Different From The Part Numbers That You Will Recieve In This Kit. This Is Not An Error. The Part Numbers In This Kit Will Directly Replace Those Numbers; Carrier Bearings NP372019 - NP343847 Replace NP847706 - NP912771; Inner Pinion Bearings NP434567 - NP576375 Replace NP665996 - NP244986; Outer Pinion Bearings HM89411 - HM89443 Replace KEST3376LFT; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

9.75 In. Differential

For Ford 9.75" (12 Bolt); Up To 1999.5; 2.6875" OD Outer Pinion Cup; Uses M88048 / M88010 Outer Pinion Bearing; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Ford 9.75" (12 Bolt); This Bearing and Seal Master Kit Will Fit All Ford 9.75" Housings From 1999.5 Through 2010. From 2007 Bearing Part Numbers May Be Different. In 2007 and Later Model Housings The Original Equipment Carrier Bearings, As Well As The Inner Pinion Bearing And Race, May Be Different From The Part Numbers That You Will Recieve In This Kit. This Is Not An Error. The Part Numbers In This Kit Will Directly Replace Those Numbers; Carrier Bearings NP372019 - NP343847 Replace NP847706 - NP912771; Inner Pinion Bearings NP434567 - NP576375 Replace NP665996 - NP244986; Outer Pinion Bearings HM89411 - HM89443 Replace KEST3376LFT; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

9.75 In. Differential