Ford Explorer Differential Replacement

Dana 30/44 Reverse Dana Super 30~Outer slinger

Dana 25/27/30/44/50 Dana Super 30~Inner slinger

AMC Model 35; Standard Rotation

9 in./7.5in./8.8 in. 10 Bolt Ford 8.8 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 7.5 in.

34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.

8.8 in. 10 Bolt; 31 Spline; w/Carbon Fiber Clutches Ford 8.8 in.; 31 Spline; w/Carbon Fiber Clutches

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

Duragrip; 31 Spline Ford 8.8 in.; Duragrip; 31 Spline~Yukon Dura Grip Positraction; Ford 8.8 in. Rear; 31 Spline; Limited Slip

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in.

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

28 Spline; 1.20 in. Axle Shaft Diameter; 7.5 in.; All Ratios

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

30 Spline; 3.92 And Up; Dana 44; Front and Rear

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

8.8 in. 10 Bolt; 31 Spline Ford 8.8 in. Rear; Yukon Grizzly Locker; 31 Spline; .875 in. Diameter Cross Pin~Ford 8.8 in.; 31 Spline; Rear

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

34 Spline; 1.37 in. Axle Shaft Diameter; Rear 9.75 in.; All Ratios

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

Dana 30; 30 Spline; 3.73 Ratio And Up Dana Super 30; 30 Spline; 3.73 Ratio And Up

Selectable Full Locker w/Limited Slip; For Use w/3.31-Down Ratio; 27 Spline Dana 35

Axle: D35 IFS Rev Shaft: 1.16" Spline: 27 Ratio: 2.73-3.31 Confirm gears are reverse cut (high pinion)

Axle: D35 IFS Rev Shaft: 1.16" Spline: 27 Ratio: 3.54 and up Confirm gears are reverse cut (high pinion)

Axle: Ford 8.8 Shaft: 1.32" Spline: 31 Ratio: All confirm axle spline count

Axle: Ford 8.8 Shaft: 1.20" Spline: 28 Ratio: All confirm axle spline count

Dana 30; 27 Spline; 3.73 Ratio And Up Dana Super 30; 27 Spline; 3.73 Ratio And Up

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 28 Spline; Can Be Used w/IFS And IRS 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 30 Spline Dana 35

27 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; 19821-020 Bearing LM102949 And Racing LM102911 Are Required

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline; For Use w/IRS Only 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 27 Spline Dana 35