Ford Explorer Exhaust Muffler Replacement

Modifications and/or Additional Parts May Be Required for Installation

If welded assembly, replace all required parts

DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

If welded assembly, replace all required parts

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

If welded assembly, replace all required parts

2.25 Offset In/2.25 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

After 12/1999 If welded assembly, replace all required parts

If welded assembly, replace all required parts

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel

2.5 in. Center Inlet/Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

112" Wheelbase

2.25 in. Center Inlet/Outlet; Oval; 4 in. x 5 in. x 12 in.; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Production: 01/28/1998-

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2.5 in. Center Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required~Adapters Needed For OEM Exhaust

2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Oval; 2.25 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 20 in. Muffler L/25 in. Overall L; Offset/Center; Reversible; Stainless Steel

2.5 in. Center Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Dual Inlet/3 in. Center Outlet; Case Dimensions 5 in. x 10 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required~Adapters Needed For OEM Exhaust

For vehicles with the 3.0L engine and rear-wheel drive. This part was cut from the vehicle structure during removal.

Condition: Excellent (A)
Mileage: 34,000 miles

It is a center muffler exhaust silencer for vehicles with the 3.0L engine. This part was cut from the vehicle structure during removal.

Condition: Good (B)
Mileage: 78,000 miles

It is for vehicles with a 3.0L engine and rear-wheel drive. This part includes the rear exhaust muffler and pipe. This part was cut from the vehicle structure during removal.

Condition: Excellent (A)
Mileage: 1,000 miles

This muffler and pipe assembly is for vehicles with a 3.0L engine and rear-wheel drive. This part was cut from the vehicle structure during removal.

Condition: Excellent (A)
Mileage: 1,000 miles

This part was cut from the vehicle structure during removal.

Condition: Excellent (A)
Mileage: 20,000 miles

This part was cut from the vehicle structure during removal.

Condition: Excellent (A)
Mileage: 20,000 miles

This is a rear muffler set for vehicles with the 3.3L engine. This part was originally equipped on a police vehicle. The set includes both sides.

Condition: Excellent (A)
Mileage: 54,200 miles