Ford F-100 Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

Dana 30 Reverse; Left Hand Thread Dana 44; Power Lok Case Bolt; Left Hand Thread

28 Spline Ford 9 in.; 28 Spline

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

Except without Spider Gears with Dana Model 44 Axle without Limited Slip Differential

For Use w/Dana Spicer 60 Dana 60

Standard; 19 Spline; 3.92 And Up Carrier Break; For Use w/Dana 44 Differential Dana 44; 19 Spline

Standard; 19 Spline; 3.73 And Down Carrier Break; For Use w/Dana 44 Differential Dana 44; 19 Spline; Standard; 19 Spline; 3.73 And Down Carrier Break; For Use w/Dana 44 Differential

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

9 in. 10 Bolt; TracLoc; 28/31 Spline; 2 Or 4 Pinion; 4 Tab Clutches Ford 9 in.; TracLoc; 28/31 Spline; 2 Or 4 Pinion; 4 Tab Clutches

Dana 60

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

For Ford 9"; 4 Pinion; Empty Case; Trac Lok; Use With Internal Kit F9-IP28H (28 Spline) or F9-IPH (31 Spline)

For Dana 44; Loaded Case; Open; 30 Spline; 1.31" Spline Diameter

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

9 in. 10 Bolt; Standard; 28/31 Spline; 2 Or 4 Pinion Ford 9 in.; Standard; 28/31 Spline; 2 Or 4 Pinion

For Ford 8.8" (10 Bolt); 31 Spline; Carbon

For Ford 8.8" (10 Bolt); 31 Spline; Includes Internal Kit; Open

with Unloaded with 28 Splines with Ford 9.0in Axle with Open Differential

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with 31 Splines with Ford 9.0in Axle

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle