Ford F-150 Differential Carrier Replacement

Dana 30 Reverse; Left Hand Thread Dana 44; Power Lok Case Bolt; Left Hand Thread

28 Spline Ford 9 in.; 28 Spline

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Works w/Most Differentials Ford 8.8 in.; Carrier shim driver kit

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

One Bearing; Ford 10.25 in.; No Return Ford 10.25 in.

Except without Spider Gears with Dana Model 44 Axle without Limited Slip Differential

One Bearing; Ford 10.5 in.; No Return Ford 10.5 in.

8.8 in. 10 Bolt; Standard; 31 Spline; 7/8 in. Cross Pin Hole Ford 8.8 in.; Standard; 31 Spline; 7/8 in. Cross Pin Hole

10.25 in. 12 Bolt; Standard Ford 10.5 in.; Standard

Case Split 3.73 And Down with Dana Model 44 Axle with Open Differential

9 in. 10 Bolt; TracLoc; 28/31 Spline; 2 Or 4 Pinion; 4 Tab Clutches Ford 9 in.; TracLoc; 28/31 Spline; 2 Or 4 Pinion; 4 Tab Clutches

9.75 in. 12 Bolt; Standard Open Case Ford 9.75 in.; Standard Open Case

For Ford 9"; 4 Pinion; Empty Case; Trac Lok; Use With Internal Kit F9-IP28H (28 Spline) or F9-IPH (31 Spline)

For Dana 44; Loaded Case; Open; 30 Spline; 1.31" Spline Diameter

8.8 in. 10 Bolt; Standard; Incl. Spider Gears; 31 Spline; 7/8 in. Shaft Ford 8.8 in.; Standard Open Carrier Case; Includes 31 Spline Spider Gears; 7/8 in. Cross Pin Shaft~Ford 8.8 in.; Standard; Incl. Spider Gears; 31 Spline; 7/8 in. Shaft

8.8 in. 10 Bolt; Dura Grip; 31 Spline Ford 8.8 in.; Dura Grip; 31 Spline

For Ford 9.75" (12 Bolt); Empty Case; Open

For Ford Super 8.8"; 34 Spline; Loaded Case; Open Carrier; 3.15 And Lower

9 in. 10 Bolt; Standard; 28/31 Spline; 2 Or 4 Pinion Ford 9 in.; Standard; 28/31 Spline; 2 Or 4 Pinion

For Ford 8.8" (10 Bolt); 31 Spline; Carbon

For Ford 8.8" (10 Bolt); 31 Spline; Includes Internal Kit; Open

8.8 in. 10 Bolt; Standard; Incl. Reverse; 28 Spline; 3/4 in. Cross Pin Hole Ford 8.8 in.; Reverse; Standard; Incl. Reverse; 28 Spline; 3/4 in. Cross Pin Hole

Ford 9.75 in. Ring Gear; Open Carrier; Loaded Case; 34 Spline

with Unloaded with 28 Splines with Ford 9.0in Axle with Open Differential

For Ford 9.75" (12 Bolt); 34 Spline; Includes Internal Kit; Open

with Spider Gears with Dana 44 Axle with Limited Slip Differential with Part Time Transfer Case

8.8 in. Super; 34 Spline

with 3.92 Gear Ratio and Up with Dana 44 Axle with Trac Lok

8.8 in. 10 Bolt; Trac-Loc; 31 Spline; Positraction Ford 8.8 in.; Trac-Loc; 31 Spline; Positraction

34 Spline; 8.8 in. Super

For Ford 9.75"; 34 Spline; With Electronic Locker; From 11/7/11

with 31 Splines with Ford 9.0in Axle

with Dana 44 IFS Axle with Trac Lok