Ford F-150 Differential Ring and Pinion Replacement

For Ford 9"; For 35 Spline Pinion

Fits All 8.8 in. Axle Including IRS; Incl. Pinion And Carrier Shims/Crush Sleeve/Pinion Nut/Pinion Seal/Ring Gear Bolts 8.8 in. (10 Bolt)

Rear; Ford 8.8 in.; 10 Cover Bolts; 10 Ring Gear Bolts; 28/31 Axle Spline; 30 Pinion Spline; Standard Rotation; Timken/KOY Bearing

Fits All 8.8 in. Axles Incl. IRS 8.8 in. (10 Bolt) Fits All 8.8 in. Axles Including IRS~Incl. All Components From PN M-4210-A Plus Differential Bearings

Ford 9 in. Daytona; 10 Cover Bolts; 10 Ring Gear Bolts; 28/31 Axle Spline; 28 Pinion Spline; Standard Rotation; Fits 3.062 Bearing

Fits all 8.8 Axles Except IRS Differential 8.8 in. (10 Bolt)

Front/Rear; Dana 44; 10 Cover Bolts; 10 Ring Gear Bolts; 30 Axle Spline; 26 Pinion Spline; Standard Rotation

Front; Dana 44 IFS; 10 Cover Bolts; 10 Ring Gear Bolts; 30 Axle Spline; 26 Pinion Spline; Reverse Rotation

with 4.27 Gear Ratio with Dana Model 44 Axle

with 3.54 Gear Ratio with Dana 44 IFS Axle

with 4.56 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.13 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 4.56 Gear Ratio with Dana Model 44 IFS Axle

with 4.56 Gear Ratio with Dana Model 44 Axle

with 216mm Diameter Ring Gear with 5.13 Gear Ratio with Dana Model 44 Axle with Reverse Rotation

with 4.09 Gear Ratio with Dana 44 Axle with Standard Gear

with 216mm Diameter Ring Gear with 5.38 Gear Ratio with Dana Model 44 Axle with Reverse Rotation

with 3.54 Gear Ratio with Dana 44 Axle

with 4.56 Gear Ratio with Ford 9.0in Axle

with 5.13 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.38 Gear Ratio with Dana Model 44 Axle

For Ford 9"; A-Line Ring and Pinion; 5.43 Ratio

with 4.88 Gear Ratio with Frod 8.8 IFS Axle with Reverse Rotation

with 4.56 Gear Ratio with For 8.8 IFS Reverse Rotation Axle

with 5.13 Gear Ratio with Ford 8.8 Axle

with 216mm Diameter Ring Gear with 4.11 Gear Ratio with Dana Model 44 Axle with Reverse Rotation

with 3.55 Gear Ratio with Ford 8.8 Axle

with 5.13 Gear Ratio with Ford 9.0in Axle

with 6.50 Gear Ratio with Ford 9.0in Axle

For Ford 8.8" (10 Bolt); A-Line Ring and Pinion; 4.56 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

For Dana 44; 5.13 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 8.8" (10 Bolt); A-Line Ring and Pinion; 4.10 Ratio

For Dana 44; 4.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 5.89 Gear Ratio with Dana Model 44 Axle

For Dana 44; 4.27 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.07 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

Fits 8.8 in. 10 Bolt; 4.10 Gear Ratio; 8.8 in. Ring Gear Dia.

Fits 8.8 in. 10 Bolt; 3.73 Gear Ratio; 8.8 in. Ring Gear Dia.

For Ford 8.8" (10 Bolt); A-Line Ring and Pinion; 3.55 Ratio

For Dana 44; 3.92 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 9"; A-Line Ring and Pinion; 4.86 Ratio

For Dana 44; 5.38 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier

For Dana 44; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 8.8" (10 Bolt); A-Line Ring and Pinion; 3.73 Ratio

For Ford 9"; A-Line Ring and Pinion; 4.11 Ratio

For Ford 9"; A-Line Ring and Pinion; 3.70 Ratio

with 4.10 Gear Ratio with Ford 9.75 Axle

For Ford 9"; A-Line Ring and Pinion; 3.89 Ratio

For Ford 9"; A-Line Ring and Pinion; 4.56 Ratio

For Ford 9"; A-Line Ring and Pinion; 3.50 Ratio

For Dana 44; 4.09 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier

For Dana 44; 5.38 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 8.8" (10 Bolt); 3.55 Ratio

For Dana 44; 4.09 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier

For Dana 44; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 9"; A-Line Ring and Pinion; 4.30 Ratio

For Ford 9"; A-Line Ring and Pinion; 5.00 Ratio

For Ford 9"; A-Line Ring and Pinion; 5.67 Ratio

For Ford 9"; A-Line Ring and Pinion; 6.20 Ratio

Fits 8.8 in. ; Front; 4.10 Gear Ratio; 8.8 in. Ring Gear Dia.; Incl. Crush Collar/Pinion Nut/Pinion Bearing/Pinion Seal/Ring Gear Bolts

Fits 8.8 in. 10 Bolt; 3.31 Gear Ratio; 8.8 in. Ring Gear Dia.

Fits 8.8 in. 10 Bolt; 3.55 Gear Ratio; 8.8 in. Ring Gear Dia.

For Ford 9"; A-Line Ring and Pinion; 4.71 Ratio

For Ford 9"; A-Line Ring and Pinion; 6.00 Ratio

For Ford 9"; A-Line Ring and Pinion; 6.33 Ratio

For Dana 44; 5.13 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier

8.8 In. Ring Gear w/3.73 Axle Ratio

with Reverse Rotation with 216mm Diameter Ring Gear with 4.88 Gear Ratio with Dana Model 44 Axle

For Ford 9"; A-Line Ring and Pinion; 5.83 Ratio

For Ford 9"; A-Line Ring and Pinion; 6.50 Ratio

with 5.83 Gear Ratio with Ford 9.0in Axle

with 4.88 Gear Ratio with Dana Model 44 Axle

For Ford 9"; A-Line Ring and Pinion; 5.14 Ratio

For Ford 9"; A-Line Ring and Pinion; 5.29 Ratio

For Dana 44; 5.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 8.8" (10 Bolt); 4.10 Ratio

Dana 44 Axle w/4.09 Axle Ratio

10.25 In. Ring Gear w/3.73 Axle Ratio

For Dana 44; 5.38 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 4.88 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 3.92 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

For Dana 44; 3.54 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.31 Gear Ratio with Ford 8.8 Axle

For Ford 9"; 3.50 Ratio

For Ford 8.8" (10 Bolt); 4.56 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

with 3.27 Gear Ratio with Ford 8.8 Axle

with 3.55 Gear Ratio with Ford 9.75 Axle

with 4.10 Gear Ratio with Ford 8.8 Axle

with 31 Splines with Ford 10.5 Axle

For Ford 8.8" (10 Bolt); 3.73 Ratio

with 3.50 Gear Ratio with Ford 9.0in Axle

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier

with 4.88 Gear Ratio with Ford 8.8 Axle

For Ford 9"; 4.57 Ratio

with 3.70 Gear Ratio with Ford 9.0in Axle

8.8 In. Ring Gear w/4.56 Axle Ratio

Carrier Break 3.73/3.92 Dana 44 Axle Reverse Rotation w/3.73 Axle Ratio

with 3.73 Gear Ratio with Ford 8.8 Axle

For Ford 9"; 3.00 Ratio

For Ford 9"; 4.11 Ratio

For Ford 9"; 3.70 Ratio

with 3.08 Gear Ratio with Ford 8.8 Axle

with 4.56 Gear Ratio with Ford 8.8 Axle

with 4.56 Gear Ratio with Ford 9.75 Axle

with 3.73 Gear Ratio with Ford 9.75 Axle

For Ford 9"; 4.86 Ratio

For Ford 9"; 3.89 Ratio

8.8 In. Ring Gear w/4.10 Axle Ratio

For Ford 9"; Performance Ring and Pinion; 3.50 Ratio; Face Milled Gear

Dana 44 Reverse; 3.73 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 3.73 Ratio; Reverse Rotation

For Ford 8.8" (10 Bolt); 4.88 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

with 5.13 Gear Ratio with Frod 8.8 IFS Axle with Reverse Rotation

For Ford 9"; 3.25 Ratio

For Ford 9"; Performance Ring and Pinion; 3.25 Ratio

with 5.13 Gear Ratio with Ford 9.75 Axle

with 4.88 Gear Ratio with Ford 9.75 Axle

For Ford 8.8" (10 Bolt); 3.27 Ratio

with 3.25 Gear Ratio with Ford 9.0in Axle

8.8 In. Ring Gear w/3.55 Axle Ratio

For Ford 9.75" (12 Bolt); 4.89 Ratio

For Ford 9"; Performance Ring and Pinion; 5.67 Ratio

For Ford 8.8" (10 Bolt); 3.08 Ratio

For Dana 44; 3.54 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

For Ford 8.8" IFS; Performance Ring and Pinion; 4.56 Ratio

Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

with 5.43 Gear Ratio with Ford 9.0in Axle

with 6.00 Gear Ratio with Ford 9.0in Axle

For Ford 9"; Performance Ring and Pinion; 5.00 Ratio

with 6.20 Gear Ratio with Ford 9.0in Axle

10.25 In. Ring Gear w/4.10 Axle Ratio

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 3.55 Ratio

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 3.73 Ratio

For Ford 9"; Performance Ring and Pinion; 3.00 Ratio

For Ford Super 8.8"; 3.73 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Ford Super 8.8"; 3.31 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Ford 9"; Performance Ring and Pinion; 3.89 Ratio

For Ford 9"; Performance Ring and Pinion; 6.33 Ratio

For Ford 9"; Performance Ring and Pinion; 5.83 Ratio

For Ford 9.75" (12 Bolt); 4.10 Ratio

For Ford 9"; 6.00 Ratio

For Ford 8.8" IFS; Performance Ring and Pinion; 4.88 Ratio

For Ford 9"; Performance Ring and Pinion; 5.43 Ratio

For Ford 9"; Performance Ring and Pinion; 6.00 Ratio

For Ford Super 8.8"; 4.88 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Ford Super 8.8"; 3.91 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 4.10 Ratio

For Ford 9"; Performance Ring and Pinion; 6.20 Ratio

For Ford 9"; Performance Ring and Pinion; 4.57 Ratio

For Ford 9"; Performance Ring and Pinion; 6.50 Ratio

8.8 in. Reverse; 3.73 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio~Ford 8.8 in.; Reverse; 3.73 Ratio; Reverse Rotation

9 in. 10 Bolt; 5.43 Ratio Ford 9 in.; 5.43 Ratio~Ford 9 in.; Ring and Pinion Set; 5.43 Ratio; 28 Spline Pinion

For Ford 9"; Performance Ring and Pinion; 4.30 Ratio

For Ford 9"; Performance Ring and Pinion; 5.29 Ratio

For Ford 9"; Performance Ring and Pinion; 4.11 Ratio

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 4.56 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 4.30 Ratio

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 3.90 Ratio

For Ford 9"; 6.60 Ratio; Lightweight

8.8 in. 10 Bolt; 4.11 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 4.11 Ratio; 30 Spline Pinion~Ford 8.8 in.; 4.11 Ratio

8.8 in. 10 Bolt; 3.31 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.31 Ratio; 30 Spline Pinion~Ford 8.8 in.; 3.31 Ratio

8.8 in. 10 Bolt; 3.27 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.27 Ratio; 30 Spline Pinion~Ford 8.8 in.; 3.27 Ratio

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 4.88 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

9.75 In. Ring Gear w/3.55 Axle Ratio

For Ford 9"; Performance Ring and Pinion; 4.86 Ratio

9 in. 10 Bolt; 5.29 Ratio Ford 9 in.; 5.29 Ratio~Ford 9 in.; Ring and Pinion Set; 5.29 Ratio; 28 Spline Pinion

For Ford Super 8.8"; 4.09 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 3.31 Ratio

9.75 In. Ring Gear w/3.73 Axle Ratio

For Ford 9"; Performance Ring and Pinion; 5.14 Ratio

For Ford 9"; 5.43 Ratio

For Ford 9"; Performance Ring and Pinion; 5.83 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 8.8" IFS; Performance Ring and Pinion; 3.73 Ratio

For Ford 9"; Performance Ring and Pinion; 3.70 Ratio

Dana 44 Reverse; 5.38 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 5.38 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 5.38 Ratio; Reverse Rotation

Dana 44 Reverse; Reverse Rotation; 4.88 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 4.88 Ratio; Reverse Rotation

Dana 44 Reverse; 4.56 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 4.56 Ratio; Reverse Rotation

Dana 44 Reverse; 4.11 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 4.11 Ratio; Reverse Rotation

Dana 44 Reverse; 5.13 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 5.13 Ratio; Reverse Rotation

For Ford 8.8" IFS; Performance Ring and Pinion; 4.10 Ratio

8.8 in. 10 Bolt; 3.73 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.73 Ratio; 30 Spline Pinion~Ford 8.8 in.; 3.73 Ratio

For Ford 9"; 5.83 Ratio

For Ford Super 8.8"; 3.73 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Dana 44; 5.89 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44; 4.88 Ratio Dana 44; 4.88 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For Ford 9"; Performance Ring and Pinion; 4.63 Ratio

For Ford 9.75" (12 Bolt); 4.56 Ratio

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 5.14 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

For Ford Super 8.8"; 3.55 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

Dana 44; 3.73 Ratio Dana 44; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

8.8 in. 10 Bolt; 3.55 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.55 Ratio; 30 Spline Pinion~Ford 8.8 in.; 3.55 Ratio

8.8 in. Reverse; 4.88 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio~Ford 8.8 in.; Reverse; 4.88 Ratio; Reverse Rotation

Dana 44; 3.08 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.08 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 3.92 Ratio Dana 44; 3.92 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.92 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set Dana 44; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set~Dana 44; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

8.8 in. Reverse; 5.13 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio~Ford 8.8 in.; Reverse; 5.13 Ratio; Reverse Rotation

Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier~Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 3.54 Ratio Dana 44; 3.54 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 4.11 Ratio Dana 44; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 3.31 Ratio Dana 44; 3.31 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.31 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

For Ford 8.8" (10 Bolt); Performance Ring and Pinion; 5.71 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

For Ford Super 8.8"; 4.56 Ratio; Requires a 3.31 and Numerically Higher Ratio Carrier

For Ford 9.75" (12 Bolt); 3.31 Ratio

For Ford 8.8" (10 Bolt); 3.73 Ratio

For Ford 9"; 4.56 Ratio

For Ford 9"; 3.25 Ratio

For Ford 9"; 3.89 Ratio

For Ford 9"; 4.33 Ratio

For Ford 9.75" (12 Bolt); 4.56 Ratio

For Ford 9.75" (12 Bolt); 3.73 Ratio

10.5 in. 14 Bolt; High Performance; 3.55 Gear Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 3.55 Gear Ratio; 31 Spline Pinion~Ford 10.5 in.; High Performance; 3.55 Gear Ratio; 31 Spline Pinion

8.8 in. 10 Bolt; 3.08 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.08 Ratio; 30 Spline Pinion~Ford 8.8 in.; 3.08 Ratio

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 4.88 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 4.88 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 4.88 Ratio

For Ford 9"; Performance Ring and Pinion; 5.37 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

Dana 44 Reverse; 3.54 Ratio Dana 44 Front; Reverse Rotation; Ring and Pinion Set; 3.54 Ratio; 26 Spline Pinion~Dana 44; Reverse Rotation; Straight Axle; 3.54 Ratio; Reverse Rotation

9 in. 10 Bolt; 3.89 Ratio Ford 9 in.; 3.89 Ratio~Ford 9 in.; Ring and Pinion Set; 3.89 Ratio; 28 Spline Pinion

9 in. 10 Bolt; 4.56 Ratio Ford 9 in.; 4.56 Ratio~Ford 9 in.; Ring and Pinion Set; 4.56 Ratio; 28 Spline Pinion

9 in. 10 Bolt; 4.11 Ratio Ford 9 in.; 4.11 Ratio~Ford 9 in.; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion

9 in. 10 Bolt; 3.70 Ratio Ford 9 in.; 3.70 Ratio~Ford 9 in.; Ring and Pinion Set; 3.70 Ratio; 28 Spline Pinion

Dana 44; 5.89 Ratio Dana 44; 5.89 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.89 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.13 Ratio Dana 44; 5.13 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For Ford 9.75" (12 Bolt); 3.55 Ratio

For Ford 9"; 4.11 Ratio

For Ford 9"; 3.50 Ratio

10.5 in. 14 Bolt; 4.56 Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 4.56 Ratio; 31 Spline Pinion~Ford 10.5 in.; 4.56 Ratio; 31 Spline Pinion

10.5 in. 14 Bolt; 4.88 Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 4.88 Ratio; 31 Spline Pinion~Ford 10.5 in.; 4.88 Ratio; 31 Spline Pinion

For Ford 9"; 5.29 Ratio

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 3.55 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 3.55 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 3.55 Ratio

Ford 8.8 in. Rear; Ring and Pinion Set; 4.11 Ratio; 31 Spline Pinion; 2.000 in. Pinion Bearing Journal~Ford 8.8 in.; 4.11 Ratio

Ford 8.8 in. Rear; Ring and Pinion Set; 4.56 Ratio; 31 Spline Pinion; 2.000 in. Pinion Bearing Journal~Ford 8.8 in.; 4.56 Ratio

Ford 8.8 in. Rear; Ring and Pinion Set; 4.88 Ratio; 31 Spline Pinion; 2.000 in. Pinion Bearing Journal~Ford 8.8 in.; 4.88 Ratio

For Ford 9"; 6.33 Ratio

For Ford 9"; 3.80 Ratio; Lightweight

For Ford 9"; Performance Ring and Pinion; 5.57 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

Ford 8.8 in. Rear; Ring and Pinion Set; 3.90 Ratio; 30 Spline Pinion~Ford 8.8 in.; 3.90 Ratio

9 in. 10 Bolt; 4.86 Ratio Ford 9 in.; 4.86 Ratio~Ford 9 in.; Ring and Pinion Set; 4.86 Ratio; 28 Spline Pinion

9 in. 10 Bolt; 3.50 Ratio Ford 9 in.; 3.50 Ratio~Ford 9 in.; Ring and Pinion Set; 3.50 Ratio; 28 Spline Pinion

9 in. 10 Bolt; Gear Set; 3.25 Ratio Ford 9 in.; 3.25 Ratio~Ford 9 in.; Ring and Pinion Set; 3.25 Ratio; 28 Spline Pinion

9 in. 10 Bolt; 5.13 Ratio Ford 9 in.; 5.13 Ratio~Ford 9 in.; Ring and Pinion Set; 5.13 Ratio; 28 Spline Pinion

For Ford 8.8" (10 Bolt); 4.30 Ratio

For Ford 9"; Performance Ring and Pinion; 5.50 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 3.80 Ratio

For Ford 9"; Performance Ring and Pinion; 3.33 Ratio

For Ford 8.8" (10 Bolt); 4.10 Ratio

For Ford 9"; Performance Ring and Pinion; 7.00 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 4.00 Ratio

For Ford 9.75" (12 Bolt); 3.55 Ratio

For Ford 9"; 3.70 Ratio

8.8 in. 10 Bolt; 3.08 Ratio; Requires Notched Cross Pin Shaft Ford 8.8 in. Rear; Ring and Pinion Set; 4.56 Ratio; 30 Spline Pinion; Requires Notched Cross Pin Shaft~Ford 8.8 in.; 4.56 Ratio; Requires Notched Cross Pin Shaft

For Ford 9.75" (12 Bolt); 4.30 Ratio

Ford 8.8 in.; 3.73 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.73 Ratio; 31 Spline Pinion; 2.000 in. Pinion Bearing Journal~Ford 8.8 in.; 3.73 Ratio

For Ford 9"; Performance Ring and Pinion; 5.29 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 5.00 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 4.78 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; 6.20 Ratio

8.8 in. 10 Bolt; 5.13 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 5.13 Ratio; 30 Spline Pinion; Requires Notched Cross Pin Shaft~Ford 8.8 in.; 5.13 Ratio ; Requires Notched Cross Pin Shaft

8.8 in. 10 Bolt; 4.56 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 4.88 Ratio; 30 Spline Pinion; Requires Notched Cross Pin Shaft~Ford 8.8 in.; 4.88 Ratio; Requires Notched Cross Pin Shaft

For Ford 8.8" (10 Bolt); 4.56 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set Dana 44; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set~Dana 44; Standard Rotation; 4.56 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.38 Ratio Dana 44; 5.38 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 5.13 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 5.13 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 5.13 Ratio

Ford 8.8 in.; 3.55 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.55 Ratio; 31 Spline Pinion; 2.000 in. Pinion Bearing Journal~Ford 8.8 in.; 3.55 Ratio

For Ford 9"; 3.55 Ratio

For Ford 10.5" (12 Bolt); 5.38 Ratio; Includes Inner And Outer Pinion Bearings Only; Includes 10.25" Late Ring/Pinion w/ 10.25" Inner/Outer Pinion Bearings, Do Not Substitute; Use Ford 10.25" Installation Kits

For Ford 9"; Performance Ring and Pinion; 4.78 Ratio

9 in. Bolt; 4.30 Ratio; Works w/4.27 in 4WD Ford 9 in.; 4.30 Ratio; Works w/4.27 in 4WD~Ford 9 in.; Ring and Pinion Set; 4.30 Ratio; 28 Spline Pinion; Works w/4.27 in 4WD

9 in. 10 Bolt; 6.50 Ratio Ford 9 in.; 6.50 Ratio~Ford 9 in.; Ring and Pinion Set; 6.50 Ratio; 28 Spline Pinion

9 in. 10 Bolt; 5.67 Ratio Ford 9 in.; 5.67 Ratio~Ford 9 in.; Ring and Pinion Set; 5.67 Ratio; 28 Spline Pinion

For Ford 9"; 4.86 Ratio

9 in. 10 Bolt; Gear Set; 3.00 Ratio Ford 9 in.; 3.00 Ratio~Ford 9 in.; Ring and Pinion Set; 3.00 Ratio; 28 Spline Pinion

For Ford 10.5" (12 Bolt); 3.55 Ratio; Includes Inner And Outer Pinion Bearings Only; Includes 10.25" Late Ring/Pinion w/ 10.25" Inner/Outer Pinion Bearings, Do Not Substitute; Use Ford 10.25" Installation Kits

For Ford 10.5" (12 Bolt); 4.56 Ratio; Includes Inner And Outer Pinion Bearings Only; Includes 10.25" Late Ring/Pinion w/ 10.25" Inner/Outer Pinion Bearings, Do Not Substitute; Use Ford 10.25" Installation Kits

For Ford 9"; 5.14 Ratio

9 in. 10 Bolt; 6.00 Ratio Ford 9 in.; 6.00 Ratio~Ford 9 in.; Ring and Pinion Set; 6.00 Ratio; 28 Spline Pinion

For Ford 8.8" (10 Bolt); 3.31 Ratio

10.5 in. 14 Bolt; 3.73 Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 3.73 Ratio; 31 Spline Pinion~Ford 10.5 in.; 3.73 Ratio; 31 Spline Pinion

10.5 in. 14 Bolt; 4.11 Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 4.11 Ratio; 31 Spline Pinion~Ford 10.5 in.; 4.11 Ratio; 31 Spline Pinion

10.5 in. 14 Bolt; 4.30 Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 4.30 Ratio; 31 Spline Pinion~Ford 10.5 in.; 4.30 Ratio; 31 Spline Pinion

Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 5.13 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

3.31 Ratio

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 3.73 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 3.73 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 3.73 Ratio

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 4.11 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 4.11 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 4.11 Ratio

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 5.38 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 5.38 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 5.38 Ratio

For Ford 9.75" (12 Bolt); 3.73 Ratio

8.8 in. 10 Bolt; 4.30 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 4.30 Ratio; 30 Spline Pinion~Ford 8.8 in.; 4.30 Ratio

For Ford 9"; Performance Ring and Pinion; 6.66 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Dana 44; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Ford 8.8" IFS; Performance Ring and Pinion; 5.29 Ratio

For Ford 8.8" (10 Bolt); 4.88 Ratio; Requires Notched Cross Pin 80-0273-1 (3/4") or 80-0279-1 (7/8") For Ring Gear Clearance

For Ford 9"; Performance Ring and Pinion; 6.33 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 6.50 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; 3.00 Ratio

For Ford 9.75" (12 Bolt); 4.10 Ratio

For Ford 9"; Performance Ring and Pinion; 7.33 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

Ford 9.75 in. Rear; Ring and Pinion Set; 3.31 Ratio; 2011 and newer gear design. requires conversion bearings for 2000-2010 applications

8.8 in. Reverse; 4.56 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio~Ford 8.8 in.; Reverse; 4.56 Ratio; Reverse Rotation

For Ford 9.75" (12 Bolt); 4.89 Ratio

For Ford 9"; Performance Ring and Pinion; 6.20 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 4.22 Ratio

For Ford 9"; Performance Ring and Pinion; 6.83 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; 6.80 Ratio; Lightweight

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 4.56 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 4.56 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 4.56 Ratio~Long spline pinion

10.25 in. 12 Bolt; 10.5 in. 14 Bolt; 4.30 Ratio Ford 10.25 in. Rear; Ring and Pinion Set; 4.30 Ratio; 1.5 in. Long Pinion Spline; OE gears with short pinion splines require a new yoke when being replaced with the long design.~Ford 10.25 in.; 4.30 Ratio

For Ford 9"; Performance Ring and Pinion; 6.14 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; Performance Ring and Pinion; 6.00 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

For Ford 9"; 7.16 Ratio; Lightweight

For Ford 9"; Performance Ring and Pinion; 3.75 Ratio

For Ford 9.75" (12 Bolt); 4.30 Ratio

For Ford 9"; 7.33 Ratio; Lightweight

For Ford 10.5" (12 Bolt); 4.10 Ratio; Includes Inner And Outer Pinion Bearings Only; Includes 10.25" Late Ring/Pinion w/ 10.25" Inner/Outer Pinion Bearings, Do Not Substitute; Use Ford 10.25" Installation Kits

9.75 in. 12 Bolt; 4.88 Ratio Ford 9.75 in. Rear; Ring and Pinion Set; 4.88 Ratio; 2011 and newer gear design. requires conversion bearings for 2000-2010 applications~Ford 9.75 in.; 4.88 Ratio

9.75 in. 12 Bolt; 4.56 Ratio Ford 9.75 in. Rear; Ring and Pinion Set; 4.56 Ratio; 2011 and newer gear design. requires conversion bearings for 2000-2010 applications~Ford 9.75 in.; 4.56 Ratio

For Ford 10.5" (12 Bolt); 3.73 Ratio; Includes Inner And Outer Pinion Bearings Only; Includes 10.25" Late Ring/Pinion w/ 10.25" Inner/Outer Pinion Bearings, Do Not Substitute; Use Ford 10.25" Installation Kits

8.8 in. Reverse; Reverse Rotation; 4.11 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio~Ford 8.8 in.; Reverse; 4.11 Ratio; Reverse Rotation

9 in. 10 Bolt; 6.20 Ratio Ford 9 in.; 6.20 Ratio~Ford 9 in.; Ring and Pinion Set; 6.20 Ratio; 28 Spline Pinion

For Ford 9"; Performance Ring and Pinion; 7.16 Ratio; Dual Drilled for 1/2" and 7/16" Ring Gear Bolts

8.8 in. Reverse; 3.31 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 3.31 Ratio~Ford 8.8 in.; Reverse; 3.31 Ratio; Reverse Rotation

Fits 2010 and down housings with conversion bearing.~Ford 9.75 in. Rear; Ring and Pinion Set; 5.13 Ratio; 2011 and newer gear design. requires conversion bearings for 2000-2010 applications~Ford 9.75 in.; 5.13 Ratio

8.8 in. Reverse; 3.55 Ratio Ford 8.8 in. Front; Reverse Rotation; Ring and Pinion Set; 3.55 Ratio~Ford 8.8 in.; Reverse; 3.55 Ratio; Reverse Rotation

For Ford 10.5" (12 Bolt); 4.89 Ratio; Includes Inner And Outer Pinion Bearings Only; Includes 10.25" Late Ring/Pinion w/ 10.25" Inner/Outer Pinion Bearings, Do Not Substitute; Use Ford 10.25" Installation Kits

9 in. 10 Bolt; 6.33 Ratio Ford 9 in.; 6.33 Ratio~Ford 9 in.; Ring and Pinion Set; 6.33 Ratio; 28 Spline Pinion

10.5 in. 14 Bolt; 3.73 Ratio; 37 Tooth Ford 10.5 in. Rear; Ring and Pinion Set; 3.73 Ratio; 37 Spline Pinion~Ford 10.5 in.; 3.73 Ratio; 37 Spline Pinion

For Ford 9"; Performance Ring and Pinion; 4.71 Ratio; Pro Gear; Small Pinion

For Ford 9"; 4.22 Ratio

For Ford 9"; 7.00 Ratio; Lightweight

For Ford 8.8" (10 Bolt); 3.55 Ratio

9.75 in. 12 Bolt; High Performance; 3.73 Gear Ratio Ford 9.75 in. Rear; Ring and Pinion Set; 3.73 Ratio; 2011 and newer gear design. requires conversion bearings for 2000-2010 applications~Ford 9.75 in.; High Performance; 3.73 Ratio

9 in. 10 Bolt; Oversize Pro Gear Set; Ford 9 in.; 3.89 Ratio Ford 9 in.; Oversize Pro Gear Set; 3.89 Ratio~Ford 9 in.; Ring and Pinion Set; 3.89 Ratio; 9310 Pro Gear; Oversized 35 Spline Pinion

9 in. 10 Bolt; 4.11 Ratio; 35 Spline Pinion; Pro Ford 9 in.; 4.11 Ratio; 35 Spline Pinion; Pro~Ford 9 in.; Ring and Pinion Set; 4.11 Ratio; 9310 Pro Gear; Oversized 35 Spline Pinion

9 in. 10 Bolt; 4.56 Ratio; Pro Ford 9 in.; 4.56 Ratio; Pro~Ford 9 in.; Ring and Pinion Set; 4.56 Ratio; 9310 Pro Gear; Oversized 35 Spline Pinion

Ford 9 in.; 4.86 Ratio; 35 Spline Pinion; Pro~Ford 9 in.; Ring and Pinion Set; 4.86 Ratio; 9310 Pro Gear; Oversized 35 Spline Pinion

9 in. 10 Bolt; 4.29 Ratio; Pro Ford 9 in.; 4.29 Ratio; Pro~Ford 9 in.; Ring and Pinion Set; 4.29 Ratio; 9310 Pro Gear; Oversized 35 Spline Pinion

For Ford 8.8" IFS; Performance Ring and Pinion; 3.55 Ratio

10.5 in. 14 Bolt; 4.11 Ratio Ford 10.5 in. Rear; Ring and Pinion Set; 4.11 Ratio; 37 Spline Pinion~Ford 10.5 in.; 4.11 Ratio; 37 Spline Pinion