Ford F-250 Alignment Caster / Camber Bushing Replacement

Original Equipment Type; Pinch Bolt And Nut Not Included; Plus or Minus 1-3/4 Degree

with Hex Head Plus or Minus 2.00 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

Camber and / or Caster Adjustable from 0 Degrees to Plus or Minus 4 Degrees

with Hex Head Plus or Minus 0.50 Degree(s) Camber and/or Caster

with Hex Head Plus or Minus 0.75 Degree(s) Camber and/or Caster

Plus or Minus 1.25 Degree(s) Camber and/or Caster

Plus or Minus 0.50 Degree(s) Camber and/or Caster

with Hex Head Plus or Minus 1.75 Degree(s) Camber and/or Caster

Plus or Minus 1.50 Degree(s) Camber and/or Caster

Plus or Minus 2 Degree(s) OE Type Pinch Bolt and Nut Not Included

Allows -1.50 Degrees to +1.50 Degrees of Adjustment

with Hex Head Plus or Minus 0.00 Degree to Plus or Minus 4.0 Degree Camber and / or Caster

Original Design 1/4 Degree

Original Design 1/2 Degree w/Twin I-Beam Suspension

Plus or Minus 2 Degree(s) OE Type Pinch Bolt and Nut Not Included

with Hex Head Plus or Minus 0.25 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

with Hex Head Plus or Minus 0.25 Degree(s) Camber and/or Caster

with Hex Head Plus or Minus 3.50 Degree(s) Camber and/or Caster

Plus or Minus 1/2 Degree(s) OE Type Pinch Bolt and Nut Not Included

with Hex Head Plus or Minus 3.25 Degree(s) Camber and/or Caster

with Hex Head Plus or Minus 2.75 Degree(s) Camber and/or Caster

Plus or Minus 1 Degree(s) OE Type Pinch Bolt and Nut Not Included

Plus or Minus 1-1/4 Degree(s) OE Type Pinch Bolt and Nut Not Included

Plus or Minus 1-1/2 Degree(s) OE Type Pinch Bolt and Nut Not Included

Plus or Minus 3/4 Degree(s) OE Type Pinch Bolt and Nut Not Included

Plus or Minus 1-3/4 Degree(s) OE Type Pinch Bolt and Nut Not Included

Plus or Minus 1.50 Degree(s) Camber and/or Caster

with Hex Head Plus or Minus 0.75 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

with Hex Head Plus or Minus 1.25 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

Allows -2.00 Degrees to +2.00 Degrees of Adjustment

Minus 3/4 To 2-3/4 Degree

Plus or Minus 1 Degree(s) OE Type Pinch Bolt and Nut Not Included

1.75 Degree (s) Sleeve

Plus or Minus 1-1/2 Degree(s) OE Type Pinch Bolt and Nut Not Included

Original Design 2.25 Degrees

with Hex Head Plus or Minus 1.75 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

0.75 Degree (s) Sleeve

Plus or Minus 2-1/4 Degree(s) OE Type Pinch Bolt and Nut Not Included

0.25 Degree (s) Sleeve

with Hex Head Plus or Minus 0.50 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

OE Type Plus or Minus 1/4 Degree(s) Pinch Bolt and Nut Not Included

Cogged Head Plus or Minus 0.75 Degree to Plus or Minus 2.75 Degree Camber and / or Caster

Plus or Minus 0.00 Degree to Plus or Minus 2.00 Degree Camber and / or Caster

0 Degree (s) Sleeve

with Hex Head Plus or Minus 1.50 Degree(s) Camber and/or Caster ; Install 0.00 degree sleeve MS40045 to determine the change needed, then install the correct sleeve.

Original Design 3.00 Degrees w/Twin I-Beam Suspension

Plus or Minus 1.00 Degree(s) Camber and/or Caster

Allows -2.00 Degrees to +2.00 Degrees of Adjustment

Cogged Head Plus or Minus 1.25 Degree(s) Camber and/or Caster

Plus or Minus 2.75 Degree(s) Camber and/or Caster

0 Degree Replacement Bushing

Original Design 2.50 Degrees w/Twin I-Beam Suspension

Original Design 3.50 Degrees w/Twin I-Beam Suspension

3 Degree Positive OE Type Pinch Bolt and Nut Not Included

3-1/4 Degree Positive OE Type Pinch Bolt and Nut Not Included

Original Design 2.50 Degrees

Plus or Minus 2-1/2 Degree(s) OE Type Pinch Bolt and Nut Not Included

Problem Solver 2 Degrees Of Change Superlok Type Locks In Design Prevent Bushing Rotation While Maintaining Alignment Pending Obsolescence

3-1/2 Degree Positive OE Type Pinch Bolt and Nut Not Included

OE Type Plus or Minus 2-3/4 Degree(s) Cogged Head

with Hex Head Plus or Minus 0.00 Degree to Plus or Minus 4.0 Degree Camber and / or Caster

2-3/4 Degree Positive OE Type Pinch Bolt and Nut Not Included

OE Type Plus or Minus 2-1/2 Degree(s) Cogged Head

Cogged Head Camber Adjustment from 0 to 3.2 Degrees

Adjustable Design Allows +3/4 Degree to +2.50 Degrees of Adjustment w/Twin I-Beam Suspension

Original Design 2.00 Degrees

Plus or Minus 2 Degree Camber - Plus or Minus 4 Degree of Caster Adjustable Can Be Set At True Zero Degree

Original Design 1.75 Degrees

Adjusts Caster/Camber -3/4 Degree to +2.75 Degrees

Plus or Minus 1-1/4 Degree(s) Cogged Head

with Twin I-Beam Axle Adjustable Plus or Minus 2.25 Degree - Minimum Adjustment 0.5 Degree

Adjustable Plus or Minus 3.2 Degree(s) Can Be Set At True Zero Degree

Adjustable -3/4 to 2-3/4 Degrees