Ford F-250 Differential Replacement

Dana 30/44 Reverse Dana 44; Standard Rotation~Outer slinger

Dana 25/27/30/44/50 Dana 44; Standard Rotation~Inner slinger

Dana 60/70/70U/70HD Dana 60~Outer slinger; 2.250 in. O.D.

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

9 in./7.5in./8.8 in. 10 Bolt Ford 10.25 in.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 44; Standard Rotation; Bulkhead Quick-Disconnect Fitting~Dana 60; Bulkhead Quick-Disconnect Fitting

; Wiper Kit Retaining Bolt Front Knuckle Oil Wiper Kit Retaining Bolt

Dana 27/30/44; Small; w/8 Retaining Bolts Dana 27/30/44; Small; w/8 Retaining Bolts

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

Dana 50 Yukon Dura Grip positraction for Dana 50; All ratios~Yukon Dura Grip positraction; Dana 50 Front. 30 Spline; All ratios

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up Dana 44; Standard Rotation; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

Duragrip; 28 Spline Ford 8.8 in.; Reverse; Duragrip; 28 Spline~Yukon Dura Grip Positraction / Limited Slip; Ford 8.8 in.; Reverse Front; 28 Spline

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in. 4.56 And Up Gear Ratios Require Relief Grinding On Ring Gear Tooth Crown

9.75 in. 12 Bolt; 34 Spline Axles Ford 9.75 in.; 34 Spline Axles~Yukon Dura Grip Positraction; Ford 9.75 in. Rear; Limited Slip; 34 Spline

Dana 50; 30 Spline Dana 50; Straight Axle; 30 Spline~Dana 50; Straight Axle; Yukon Grizzly Locker; 30 Spline

Dana 60; 30 Spline; 4.56 And Up~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.56 and Up Ratio

Dana 60; 30 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

30 Spline; 4.10 And Down Dana 60; 30 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.56 And Up Dana 60; 30 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.56 And Up; w/ Full Float Axle

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

8.8 in. 10 Bolt; 28 Spline Ford 8.8 in.; Reverse Front; Yukon Grizzly Locker; 28 Spline; .750 in. Diameter Cross Pin~Ford 8.8 in.; Reverse; 28 Spline; Rear

Selectable Full Locker w/Limited Slip; For Use w/3.73-Down Ratio; 30 Spline Dana 44

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down

10.25 in. 12 Bolt; 35 Spline Ford 10.25 in.; 35 Spline~Ford 10.25 in.; Full Float Rear; Yukon Grizzly Locker; 35 Spline;

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

Axle: DANA 44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up

Axle: DANA 44 Shaft: 1.31" Spline: 30 Ratio: 3.73 and down

Axle: Dana 50 Shaft: 1.31" Spline: 30 Ratio: All

Axle: Ford 8.8 IFS Shaft: 1.20" Spline: 28 Ratio: All

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; Standard Rotation; 30 Spline; 3.92 Ratio And Up

30 Spline; 3.73 Ratio And Down Dana 44; Standard Rotation; 30 Spline; 3.73 Ratio And Down

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Axle: Sterling 10.25"/10.50" Shaft: 1.50" Spline: 35 Ratio: All Confirm axle is Sterling 10.25"/10.5"

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.30 and down Confirm axle is Dana 60

Axle: Dana 60 Shaft: 1.31" Spline: 30 Ratio: 4.10 and down Confirm axle is D60

Axle: Dana 60 Shaft: 1.31" Spline: 30 Ratio: 4.56 and up Confirm axle is D60

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is Dana 60

Selectable Full Locker w/Limited Slip; For Use w/3.92-Up Ratio; 30 Spline Dana 44

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

10.25 in. 12 Bolt; 35 Spline Ford 10.5 in.; 35 Spline

30 Spline; 4.56 Ratio And Up Dana 60; 30 Spline; 4.56 Ratio And Up

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

30 Spline; 4.10 Ratio And Down Dana 60; 30 Spline; 4.10 Ratio And Down

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 30 Spline Dana 50

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 28 Spline; Can Be Used w/IFS And IRS 8.8 in. Reverse

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.10 Gear Ratio Up

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline 8.8 in. Reverse

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.56 Gear Ratio Down

Open To Lock; Dana 80; 35 Spline; 3.73 Gear Ratio down

Open To Lock; Dana 80; 35 Spline; 4.10 Gear Ratio Up

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter