Ford F-250 Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

Dana 30 Reverse; Left Hand Thread Dana 44; Standard Rotation; Power Lok Case Bolt; Left Hand Thread

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard Rotation; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Works w/Most Differentials Ford 10.5 in.; Carrier shim driver kit~Ford 9.75 in.; Carrier shim driver kit

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; Standard Rotation; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44; Standard Rotation

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard Rotation; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; Standard Rotation; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

One Bearing; Ford 10.25 in.; No Return Ford 10.25 in.

Except without Spider Gears with Dana Model 44 Axle without Limited Slip Differential

One Bearing; Ford 10.5 in.; No Return Ford 10.5 in.

10.25 in. 12 Bolt; Standard Ford 10.25 in.; Standard

Case Split 4.56 And Up with Dana 60 Axle with Empty Case

For Use w/Dana Spicer 60 Dana 60

For Use w/Dana Spicer 50 Dana 50; Straight Axle

Case Split 3.73 And Down with Dana Model 44 Axle with Open Differential

Standard; 19 Spline; 3.73 And Down Carrier Break; For Use w/Dana 44 Differential Dana 44; 19 Spline; Standard; 19 Spline; 3.73 And Down Carrier Break; For Use w/Dana 44 Differential

Standard; 19 Spline; 3.92 And Up Carrier Break; For Use w/Dana 44 Differential Dana 44; 19 Spline

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

Dana 60; Reverse Rotation

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

9.75 in. 12 Bolt; Standard Open Case Ford 9.75 in.; Standard Open Case

For Dana 44; Loaded Case; Open; 30 Spline; 1.31" Spline Diameter

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

For Ford 9.75" (12 Bolt); Empty Case; Open

For Ford 8.8" (10 Bolt); 31 Spline; Carbon

For Ford 8.8" (10 Bolt); 31 Spline; Includes Internal Kit; Open

8.8 in. 10 Bolt; Standard; Incl. Reverse; 28 Spline; 3/4 in. Cross Pin Hole Ford 8.8 in.; Reverse; Standard; Incl. Reverse; 28 Spline; 3/4 in. Cross Pin Hole

Ford 9.75 in. Ring Gear; Open Carrier; Loaded Case; 34 Spline

Fits Dana 50; Includes Spider Gears; Standard Open Carrier Dana 50; Straight Axle; Includes Spider Gears; Standard Open Carrier

For Ford 9.75" (12 Bolt); 34 Spline; Includes Internal Kit; Open

with Spider Gears with Dana 44 Axle with Limited Slip Differential with Part Time Transfer Case

with Empty Case with Ford 10.25 & 10.5 Axles

with 3.92 Gear Ratio and Up with Dana 44 Axle with Trac Lok

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with Dana 60 Axle with Trac Lok Case Split 4.56 And Up Reverse Rotation - Turn Input Shaft Clockwise & Output Shaft will Turn Counter-Clockwise with 35 Splines

with Full Float with Trac Lok Case Split 4.10 And Down with 30 Splines with Dana 60 Axle

with Dana 60 Axle with Trac Lok Case Split 4.10 And Down Reverse Rotation - Turn Input Shaft Clockwise & Output Shaft will Turn Counter-Clockwise with 35 Splines

with Dana 44 IFS Axle with Trac Lok

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle