Ford F-250 Drive Shaft Center Support Replacement

Spicer 1280, 1410; Bearings I.D. = 1.3780 - 1.3775"

w/Spicer:1280-1310-1410-1480(Slip Yolk Style) 1.3780

Spicer 1480, 1550; Bearings I.D. = 1.5748 - 1.5743"

w/Spicer:1410-1480;Cleveland O55 1.5748" Bearing I.D. 2.2500' Bearing Centerline

2.50" CenterLine height

w/ 1310 or 1330 Series

With Spicer U-Joint Series 1410-1480; Cleveland O55 U-Joint; 1.5748" Bearing I.D.; 2.2500'' Bearing Centerline To Mounting Surface

With Spicer U-Joint Series 1410-1480; Cleveland O55 U-Joint; 1.5748" Bearing I.D.; 2.4790" Bearing Centerline To Mounting Surface

With Spicer U-Joint Series; 1.9685" Bearing I.D.

1.3780" Bearing I.D. With Spicer U-Joint Series 1280-1310-1410-1480; Slip Yoke Style; 1.3780" Bearing I.D. O.E. Design; Two Dust Shields; Bracket With Shoulder

w/Spicer 1.9685

Slip Yoke Style with 1.378 (in) Bearing Inside Diameter with 35 (mm) Bearing Inside Diameter with Spicer 1310,1330 U-Joint(s) Includes Bearing and Support without Oil Slinger

with 40 (mm) Bearing Inside Diameter with 1.5748 (in) Bearing Inside Diameter with Spicer 1410 U-Joint(s) Includes Bearing and Support without Oil Slinger

w/ 1310 or 1330 Series

With Spicer U-Joint Series; 1.7717" Bearing I.D.

Without Plate-Without Studs; With Short Rear Rubber Extension; 1.5748" Bearing I.D.

with 40 (mm) Bearing Inside Diameter with 1.5748 (in) Bearing Inside Diameter with Spicer 1480 U-Joint(s) Includes Bearing and Support without Oil Slinger

w/ 1310 or 1330 Series

w/Spicer 2.3622