Ford F-250 HD Differential Replacement

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 70B; Rear Dana 70

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

Axle: Ford 8.8 IFS Shaft: 1.20" Spline: 28 Ratio: All

Axle: Dana 50 Shaft: 1.31" Spline: 30 Ratio: All

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Axle: Sterling 10.25"/10.50" Shaft: 1.50" Spline: 35 Ratio: All Confirm axle is Sterling 10.25"/10.5"

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.30 and down Confirm axle is Dana 60

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is Dana 60

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 30 Spline Dana 50

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.10 Gear Ratio Up

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.56 Gear Ratio Down

Open To Lock; Dana 80; 35 Spline; 4.10 Gear Ratio Up

Open To Lock; Dana 80; 35 Spline; 3.73 Gear Ratio down

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter