Ford Focus Brake Drum Replacement

w/o Bearing

w/o Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.

w/ Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.

With Wheel Bearing; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.; Coated Hat and Edge for Rust Resistance

CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.

OE Design; From 3/05/12

Bearing with 8 (in) x 1-15/32 (in) Brakes Black E-Coat on non-braking surface to prevent rust and corrosion