Ford Focus Transmission Clutch Kit Replacement

Standard; Kit includes Concentric Slave Cylinder.;Kit Only; O.D : 9 7/16 ;I.D : 1 ;TEETH : 23T

Slave Cylinder included Refer to LB163 regarding internal slave cylinders

Diaphragm; For OE Dual Mass Flywheel System; 9 7/16 Inch Clutch Diameter; 23 Tooth Spline; 1 Inch Input Shaft Diameter Slave Cylinder Is Included With Release Bearing

Includes Slave Cylinder; 8-5/8" Disc; 17 Spline

Must USE FWFMF06 with kit, Includes Slave cylinder; 8-7/8" Disc; 23 Spline

Includes Slave Cylinder; 9-7/16" Disc; 23 Spline

Refer to LB207 regarding noise Flywheel not included LuK RepSet contains 9 7/16" clutch. Use only if flywheel has been upgraded from original equipment. Slave Cylinder included Refer to LB163 regarding internal slave cylinders

Ductile Casting; 225mm; 23T/26.2mm Spline; Wheel Torque Rating 193 ft./lbs.; 1567 lbs. Clamp Load

Slave Cylinder included Refer to LB163 regarding internal slave cylinders

Clutch Kit - Solid Flywheel Conversion Includes: Standard Flywheel, SACHS Rigid Disc, and Concentric Slave Cylinder. Design Version: 9 3/8 in. Outside Diameter; 23 Teeth; ID: 1

Disc Size: 8 5/8 x 13/16 x 17

Slave Cylinder included

9-7/16" Disc; 23 Spline

Includes Slave Cylinder; 9" Disc; 23 Spline

OEM Dual Mass Flywheel must be changed to ZF502 when using performance clutch Kit (# 07804, #07954), needs 6-crank bolts (part # 2S7Z-6379-AA) from Dealer.; 23-Spline; 193 Torque Capacity @Wheels

Slave Cylinder included LuK RepSet contains 9 7/16" clutch and flywheel as an upgrade from the original equipment. Flywheel included Refer to LB163 regarding internal slave cylinders

Ductile Casting; Thick Ceramic Facing; 225mm; 23T/26.2mm Spline; Wheel Torque Rating 224 ft./lbs.; 1567 lbs. Clamp Load

OEM Dual Mass Flywheel must be changed to ZF502 when using performance clutch Kit (# 07804, #07954), needs 6-crank bolts (part # 2S7Z-6379-AA) from Dealer.; 23-Spline; 224 Torque Capacity @Wheels

23-Spline; 368 Torque Capacity @Wheels

23-Spline; 396 Torque Capacity @Wheels

9 1/8 in. Dia.; 14 Spline; 1 in. Input Shaft; 345 ft/lbs Torque; Incl. Pressure Plate/Clutch Disc/Flywheel; Does Not Incl. Throwout Bearing