Ford Mustang Engine Camshaft Replacement

OE Stock Replacement Grind

OE Stock Replacement Grind Contains Camshaft And Variable Valve Timing Actuator

OE Stock Replacement Grind Does Not Contain Variable Valve Timing Actuator

OE Stock Replacement Grind Contains Camshaft And Variable Valve Timing Actuator

This is a set of two variable valve timing (VVT) solenoids for the camshaft. For vehicles with the 2.3L engine.

Condition: Excellent (A)
Mileage: 73,000 miles

OE Stock Replacement Grind

Left

Left

Right

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

Intake/Exhaust Duration 240 Degrees; High Performance;Racing Use Only Camshaft Will Work With Stock Pistons~No Valve Spring Change Is Required

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

This intake camshaft is for vehicles with the 2.3L engine and includes the sprocket.

Condition: Excellent (A)
Mileage: 19,000 miles

OE Stock Replacement Grind

It includes the sprocket.

Condition: Excellent (A)
Mileage: 3,000 miles

This camshaft is for vehicles with the 2.3L engine and rear-wheel drive (RWD). It includes the sprocket.

Condition: Excellent (A)
Mileage: 3,000 miles

It is for vehicles with the 2.3L EcoBoost engine.

Condition: Excellent (A)
Mileage: 11,000 miles

OE Stock Replacement Grind

Hyd Roller 1500-6500rpm Adv Dur at 0.050 Int/Exh 235/238 Deg. Lift at Valve Int/Exh 0.573/0.583 in. Lobe Spes 112 Deg. Intake Center Line 107 Deg. Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Match w/RPM Air-Gap Dual Quad 75354 and Performer RPM Heads 60255~ The Combo Produces 449hp and 413 ft.-lbs. of Torque

Hyd Roller 1500-6500rpm Adv Dur at 0.050 Int/Exh 227/234 Deg. Lift at Valve Int/Exh 0.520 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Idle Vacuum at 1000 RPM - 12 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Match w/Performer PRM Heads PN[60255]~ This Combo Produces 384hp and 347 ft.-lbs Of Torque

OE Stock Replacement Grind

Performance Camshaft Work Only w/Mass Air Induction On EFI Systems; .512 in. Valve Lift;Racing Use Only Not Legal For Sale Or Use On Pollution Controlled Vehicles

Performance Camshaft Work Only w/Mass Air Induction On EFI Systems; .480 in. Valve Lift; [Available While Supplies Last];Racing Use Only Not Legal For Sale Or Use On Pollution Controlled Vehicles

Performance Camshaft Work Only w/Mass Air Induction On EFI Systems; .542 in. Valve Lift;Racing Use Only Not Legal For Sale Or Use On Pollution Controlled Vehicles

Performance Camshaft Work Only w/Mass Air Induction On EFI Systems; .498 in. Valve Lift;Racing Use Only Not Legal For Sale Or Use On Pollution Controlled Vehicles

Hyd Roller 1500-5500rpm Adv. Dur. at 0.050 Int/Exh 220 Deg. Lift at Valve Int/Exh 0.498 in. Lobe Seps 110 Deg. Intake Center Line 110 Deg. CARB E.O. D-215-14 May Use Original Hydraulic Roller Lifters~ Idle Vacuum - 13 inch~ 50 State Legal~ Match w/Performer Intake 3821 and Performer Heads 60379~ This Combo Produces 300hp and 325 ft.-lbs. of Torque

OE Stock Replacement Grind Use 351 Windsor Firing Order