Ford Taurus Exhaust Muffler Replacement

with Single Exhaust; DIRECT FIT MSL/MAXIMUM Muffler

If welded assembly, replace all required parts

Single Outlet Muffler Replaces Dual Outlet Must Use with Part Number(s) 42735 Spout Modifications and/or Additional Parts May Be Required for Installation

If welded assembly, replace all required parts

with Single Exhaust; DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

If welded assembly, replace all required parts

2.25 Offset In/2.25 Center Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

If welded assembly, replace all required parts

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2.5 in. Inlet/Outlet; 409 Stainless Internal Components; 304 Stainless Case Not Direct Fit-Some Adaptation Required

2.25 in. Inlet/Outlet; 409 Stainless Internal Components; 304 Stainless Case Not Direct Fit-Some Adaptation Required

Direct Fit; 4 in. T304 Stainless Steel Tips; RH(Passenger) Side; 4.5 inx9.75 in 4 in. T304 Stainless Steel

Direct Fit; LH(Driver) Side; 4 in.T304 Stainless Steel Tips;4.5 inx9.75 in; 32 in Overall Length; T409 Stainless Steel 4 in. T304 Stainless Steel