GMC Caballero Engine Camshaft and Lifter Kit Replacement

Off-Idle to 5500rpm Adv. Dur. at 0.500 Int./Exh 204/214Deg. Lift at Valve Int/Exh. 0.420./0.442in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. CARB E.O. D-215-19 Idle Vacuum at 1000 RPM - 14 inch~ 50 State Legal~ Produces 320 hp/382 ft.-lbs. When Matched w/2701 Intake and 60909 Heads

Off-Idle to 5500rpm Adv. Dur. at 0.050 Int/Exh 204/214 Deg. Lift at Valve Int/Exh 0.420/0.433 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ For Non-Computer Controlled and Non-Roller Applications

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

OE Stock Replacement Grind

Hyd 1500-6500rpm Adv Dur. at 0.050 Int.Exh/ 234/244 Deg. Lift at Valve Int/Exh. 0.488/0.510 in. Lob Seps 112 Deg. Intake Center Line 107 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads

Off-Idle to 5500rpm Adv. Dur. at 0.050 In/Exh 204/214 Deg. Lift at Valve Int/Exh 01.448/0.472 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. For Non Computer-Controlled Vehicles~ Idle Vacuum at 1000 RPM - 15 inch~ Even Fire~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 278 Advertised Exhaust Duration 288 Use With VS-380 Valve Spring. Installed Height 1.72 Inches Not California Compliant

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 278 Advertised Exhaust Duration 288 Use With VS-380 Valve Spring. Installed Height 1.72 Inches Not California Compliant

OE Stock Replacement Grind

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only '87+ Factory Roller Engines without balance shaft.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.