GMC Jimmy Fuel Pump Module Assembly Replacement

Platinum Pro Part Includes Wiring Harness

Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

w/Steel Tank Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

w/Plastic Tank Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

Except Export; Includes Tank Seal, Connectors, and Wire Harness

Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

4-Door

Except RFI Filter Stamped GAV with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector To be used only when failed fuel module cover contains a 3-pin black pressure sensor

4-Door (18 Gallon Fuel Tank)

with Plastic Tank with 18 Gallon Tank RPO Code NE2 Updated design with Check Valve. Can be used to replace fuel pump modules built with or without check valve To be used only when failed fuel module cover contains a 3-pin black pressure sensor with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector

with Turbine Pump Technology with 18 Gallon Tank ; Includes Tank Seal, Connectors, and Wire Harness

Except RFI Filter Stamped GAV with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector with Pressure Sensor

2-Door

4-Door

In Tank Assembly (Includes Fuel Tank Sending Unit) With 31 Gallon Tank 4 Outlets

with Plastic Tank with 18 Gallon Tank RPO Code NE2 Original design without Check Valve. Must only be used to replace fuel pump modules built without check valve. If you are unsure if your module has a check valve, then use FG0287

Except RFI Filter Stamped GAV with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector To be used only when failed fuel module cover contains a 3-pin black pressure sensor

Except RFI Filter Stamped GAV with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector with Pressure Sensor

with Plastic Tank with 18 Gallon Tank RPO Code NE2 Updated design with Check Valve. Can be used to replace fuel pump modules built with or without check valve To be used only when failed fuel module cover contains a 3-pin black pressure sensor with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector