GMC K1500 Suburban Drive Axle Shaft Replacement

For Dana 44, GM 8.5"; 9.94" Overall Length; 19 Spline

It fits vehicles with a 12-bolt axle cover and four-wheel drive (4x4).

Condition: Excellent (A)
Mileage: 96,200 miles

It fits vehicles with a 12-bolt axle cover and four-wheel drive (4x4).

Condition: Excellent (A)
Mileage: 96,200 miles

with 19 Splines

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 36.13in Axle

2.808 In. O.D. Large Bearing 30 Spline 8.5 In. Ring Gear 8.625 In. Ring Gear

2.535 In. O.D. Small Bearing 30 Spline 8.5 In. Ring Gear 8.625 In. Ring Gear Does Include Bearing, Seal, or Hardware

30 Spline 8.75 In. or 8.875 In. Ring Gear Does Include Bearing, Seal, or Hardware w/12 Bolt Cover

with 36.13in Axle with 5-760X Universal Joint - Required Requires 5-760X U-Joint Steel Axle Shaft with 30 Spline Teeth with Dana 44 Axle

with 5-760X Universal Joint - Required with Dana 44 & GM 8.5 Axles Requires 5-760X U-Joint with 28 Splines with 35.46in Shaft Length

8.5 in. 10 Bolt; 8.25 in.; 28 Spline; 19.51 in. Length 4340 Chromoly~GM 8.5 in.; 28 Spline; 19.51 in. Length

8.5 in. 10 Bolt; 8.25 in.; 28 Spline; 35.46 in. Length 4340 Chromoly~GM 8.5 in.; 28 Spline; 35.46 in. Length

For GM 8.25" IFS; 5.04" Overall Length; 28 Spline

28 Spline 8.5 In. Ring Gear Does Include Bearing, Seal, or Hardware

with 5-760X Universal Joint - Required with Dana 44 Axle Requires 5-760X U-Joint with 30 Spline Teeth with 36.13in Axle

Dana 44 Reverse; 30 Spline; 18.5 in. Length Dana 44; Standard Rotation; 30 Spline; 18.5 in. Length

8.875 in. 12 Bolt; 30 Spline; 31 7/16 in. Length; 6 Lug GM 12 Bolt Truck; 30 Spline; 31 7/16 in. Length; 6 Lug

8.5 in. 10 Bolt; 30 Spline; 33 in. Length GM 8.5 in.; 30 Spline; 33 in. Length

8.5 in. 10 Bolt; 28 Spline; 31 1/2 in. Length GM 8.5 in.; 28 Spline; 31 1/2 in. Length

9.5 In. Ring Gear Does Include Bearing, Seal, or Hardware

with Dana 60 Axle

Dana 44; 30 Spline; 36.13 in. Length Dana 44; Standard Rotation; 30 Spline; 36.13 in. Length

8.5 in. 10 Bolt; 28 Spline; 35.5 in. Length GM 8.5 in.; 28 Spline; 35.5 in. Length

with 5-760X Universal Joint - Required with Dana 44 & GM 8.5 Axles Requires 5-760X U-Joint with 19.15in Shaft Length with 28 Splines

with 28 Splines with 31.50in Shaft Length with GM 8.5 Axle

For GM 8.5" (10 Bolt); 33" Overall Length; 6 x 5.5 Lug Pattern; 30 Spline

For GM 8.5" (10 Bolt); 31.31" Overall Length; 6 x 5.5 Lug Pattern; 28 Spline

with 2 Snap Ring Grooves at Shaft End with 9.72in Shaft Length with Dana 44 Front Axle

Requires 5-760X with 9.94in Shaft Length with Dana 44 & GM 8.5 Axles

6 Lug; 12-Bolt; 6X5.5 Bolt Pattern

5 Lug; 12-Bolt; 5X5 Bolt Pattern