GMC K2500 Differential Ring and Pinion Replacement

Rear; GM 8.5 in.; 10 Cover Bolts; 10 Ring Gear Bolts; 28/30 Axle Spline; 30 Pinion Spline; Standard Rotation; w/ Eaton Posi/Truetrac

with 4.27 Gear Ratio with Dana Model 44 Axle

with 3.73 Gear Ratio with GM 8.25 IFS Axle

with 4.11 Gear Ratio with GM 8.25 IFS Axle

Rear; GM 10.50 in.; 14 Cover Bolts; 12 Ring Gear Bolts; 30 Axle Spline; 30 Pinion Spline; Standard Rotation

with 4.56 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.13 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 4.56 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Standard Gear

with 3.54 Gear Ratio with Dana 44 Axle

10 Bolt with 5.13 Gear Ratio with GM 8.5 & 8.6 Axles

with 5.13 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.38 Gear Ratio with Dana Model 44 Axle

Rear; GM 9.5 in.; 14 Cover Bolts; 12 Ring Gear Bolts; 33 Axle Spline; 30 Pinion Spline; Standard Rotation; Fits 1996 And Older Applications

Rear; GM 9.5 in.; 14 Cover Bolts; 12 Ring Gear Bolts; 33 Axle Spline; 30 Pinion Spline; Standard Rotation; Fits 1997-2013 Applications

10 Bolt with 2.73 Gear Ratio with GM 8.5 & 8.6 Axles

10 Bolt with 5.38 Gear Ratio with GM 8.5 & 8.6 Axles

Rear; GM 10.50 in.; 14 Cover Bolts; 12 Ring Gear Bolts; 30 Axle Spline; 30 Pinion Spline; Standard Rotation; Cover Gasket Not Included

10.5 In. Ring Gear Standard Gear w/4.56 Axle Ratio

For Dana 44; 5.13 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For GM 8.5"/8.625" (10 Bolt); A-Line Ring and Pinion; 3.08 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For Dana 44; 4.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 5.89 Gear Ratio with Dana Model 44 Axle

For Dana 44; 4.27 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

8.5 In. Ring Gear w/3.42 Axle Ratio

For Dana 44; 3.07 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 44; 3.92 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

14 Bolt Case Split 4.10 And Down with 4.88 Gear Ratio with GM 10.5 Axle with Thick Gear

8.5 In. Ring Gear w/3.73 Axle Ratio

For GM 8.5"/8.625" (10 Bolt); 3.73 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); A-Line Ring and Pinion; 3.73 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); A-Line Ring and Pinion; 3.42 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For Dana 44; 4.09 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

10 Bolt with 3.23 Gear Ratio with GM 8.5 & 8.6 Axles

10 Bolt with 4.88 Gear Ratio with GM 8.5 & 8.6 Axles

For Dana 44; 5.38 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For GM 8.5"/8.625" (10 Bolt); 4.11 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); A-Line Ring and Pinion; 4.56 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

14 Bolt Case Split 4.10 And Down with 5.38 Gear Ratio with GM 10.5 Axle with Thick Gear

For GM 8.5"/8.625" (10 Bolt); 3.42 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

14 Bolt with 4.11 Gear Ratio with GM 10.5 Axle

For GM 8.5"/8.625" (10 Bolt); A-Line Ring and Pinion; 4.11 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.25 In. Ring Gear Aluminum Housing w/4.56 Axle Ratio

14 Bolt Case Split 4.10 And Down with 5.13 Gear Ratio with GM 10.5 Axle with Thick Gear

14 Bolt Case Split 4.10 And Down with 4.56 Gear Ratio with GM 10.5 Axle with Thick Gear

with 4.88 Gear Ratio with Dana Model 44 Axle

For GM 8.5"/8.625" (10 Bolt); 4.56 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.25 In. Ring Gear Aluminum Housing w/4.88 Axle Ratio

For Dana 44; 5.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44 Axle w/4.09 Axle Ratio

14 Bolt with 3.21 Gear Ratio with GM 10.5 Axle

8.5 In. Ring Gear w/2.73 Axle Ratio

For Dana 44; 5.38 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 4.88 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 3.92 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

For Dana 44; 3.54 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

10 Bolt with 3.73 Gear Ratio with GM 8.5 & 8.6 Axles

8.5 In. Ring Gear Carrier Break 2.56/2.73 For 28 Spline Only w/3.23 Axle Ratio

10.5 In. Ring Gear w/3.21 Axle Ratio

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 4.88 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

14 Bolt with 4.56 Gear Ratio with GM 10.5 Axle

10 Bolt with 3.42 Gear Ratio with GM 8.5 & 8.6 Axles

For GM 8.5"/8.625" (10 Bolt); 3.08 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 9.5" (14 Bolt); 4.10 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier

10 Bolt with 3.90 Gear Ratio with GM 8.5 & 8.6 Axles

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 4.10 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

10.5 In. Ring Gear Thick Gear for Carrier 4.10 Ratio and Lower w/4.56 Axle Ratio

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 3.73 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.25 In. Ring Gear Aluminum Housing w/3.73 Axle Ratio

For GM 9.5" (14 Bolt); 3.73 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); 2.73 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.25 In. Ring Gear Aluminum Housing Reverse Cut w/3.42 Axle Ratio

For GM 9.5" (14 Bolt); 4.56 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); 3.90 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 10.5" (14 Bolt); 3.75 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; Standard Rotation; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 3.42 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 10.5" (14 Bolt); 5.13 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier

For GM 9.5" (14 Bolt); 4.88 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier

8.5 In. Ring Gear w/4.10 Axle Ratio

For GM 10.5" (14 Bolt); 4.88 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier

8.5 in./8.6 in. 10 Bolt; 4.56 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 4.56 Ratio~GM 8.5 in.; 4.56 Ratio

10 Bolt; 3.23 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.23 Ratio~GM 8.5 in.; 3.23 Ratio

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 4.56 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.5 in./8.6 in. 10 Bolt; 4.88 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 4.88 Ratio~GM 8.5 in.; 4.88 Ratio

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 5.13 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 10.5" (14 Bolt); 4.10 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

8.5 in./8.6 in. 10 Bolt; 3.42 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.42 Ratio~GM 8.5 in.; 3.42 Ratio

For GM 9.5" (14 Bolt); 3.42 Ratio; Requires a 3.42 and Numerically Higher Ratio Carrier

For GM 10.5" (14 Bolt); 4.56 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 3.08 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 2.73 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

GM 9.5 in. Rear; w/ 14 bolt cover; 5.38 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 5.38 Ratio

For GM 9.25"; Performance Ring and Pinion; 4.56 Ratio

For GM 8.5"/8.625" (10 Bolt); Performance Ring and Pinion; 4.30 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 9.25"; Performance Ring and Pinion; 4.10 Ratio

For GM 8.5"/8.625" (10 Bolt); 4.30 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For Dana 44; 5.89 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44; 4.88 Ratio Dana 44; Standard Rotation; 4.88 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For GM 8.5"/8.625" (10 Bolt); 4.10 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.25 in.; Reverse Rotation; 5.13 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio; Fits 3.42 and Up Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 5.13 Ratio

Dana 44; 3.73 Ratio Dana 44; Standard Rotation; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; Standard Rotation; 3.08 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.08 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 3.92 Ratio Dana 44; Standard Rotation; 3.92 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.92 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set Dana 44; Standard Rotation; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set~Dana 44; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier~Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier

Dana 44; 3.54 Ratio Dana 44; Standard Rotation; 3.54 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 4.11 Ratio Dana 44; Standard Rotation; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 3.31 Ratio Dana 44; Standard Rotation; 3.31 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.31 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

For GM 8.5"/8.625" (10 Bolt); 3.73 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

10.5 In. Ring Gear w/3.42 Axle Ratio

For GM 9.25"; Performance Ring and Pinion; 4.88 Ratio

8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.5 in.; 3.73 Ratio

For GM 8.5"/8.625" (10 Bolt); 3.90 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 10.5" (14 Bolt); 4.56 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); 4.56 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); 4.88 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); 3.08 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

9.25 in.; Reverse Rotation; 3.73 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 3.73 Ratio

9.25 in.; Reverse Rotation; 3.42 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 3.42 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 3.42 Ratio

9.5 in. 14 Bolt; 4.88 Ratio GM 9.5 in. Rear; w/ 14 bolt cover; 4.88 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 4.88 Ratio

9.5 in. 14 Bolt; 3.73 Ratio GM 9.5 in. Rear; w/ 14 bolt cover; 3.73 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 3.73 Ratio

9.25 in.; Reverse Rotation; 4.56 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 4.56 Ratio

9.5 in. 14 Bolt; 5.13 Ratio GM 9.5 in. Rear; w/ 14 bolt cover; 5.13 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 5.13 Ratio

9.5 in. 14 Bolt; 3.42 Ratio GM 9.5 in. Rear; w/ 14 bolt cover; 3.42 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 3.42 Ratio

9.5 in. 14 Bolt; 4.11 Ratio GM 9.5 in. Rear; w/ 14 bolt cover; 4.11 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 4.11 Ratio

9.25 in.; Reverse Rotation; 4.11 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 4.11 Ratio

Dana 44; 5.89 Ratio Dana 44; Standard Rotation; 5.89 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.89 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.13 Ratio Dana 44; Standard Rotation; 5.13 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

9.5 in. 14 Bolt; 4.56 Ratio GM 9.5 in. Rear; w/ 14 bolt cover; 4.56 Ratio; Ring and Pinion Set; 30 Spline Pinion~GM 9.5 in.; 14 bolt cover; 4.56 Ratio

10.5 in. 14 Bolt; Thick; 4.88 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 4.88 Ratio; Thick Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; Thick; 4.88 Ratio

10.5 in. 14 Bolt; 3.73 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 3.73 Ratio; Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; 3.73 Ratio

10.5 in. 14 Bolt; Thick; 5.13 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 5.13 Ratio; Thick Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; Thick; 5.13 Ratio

10.5 in. 14 Bolt; Thick; 4.56 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 4.56 Ratio; Thick Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; Thick; 4.56 Ratio

4.56 Gear Ratio

10.5 in. 14 Bolt; 4.11 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 4.11 Ratio; Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; 4.11 Ratio

10.5 in. 14 Bolt; Thick; 5.38 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 5.38 Ratio; Thick Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; Thick; 5.38 Ratio

For GM 8.5"/8.625" (10 Bolt); 3.42 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

For GM 8.5"/8.625" (10 Bolt); 5.13 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

8.5 in./8.6 in. 10 Bolt; 5.13 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 5.13 Ratio~GM 8.5 in.; 5.13 Ratio

8.5 in./8.6 in. 10 Bolt; 5.38 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 5.38 Ratio~GM 8.5 in.; 5.38 Ratio

8.5 in./8.6 in. 10 Bolt; 3.90 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.90 Ratio~GM 8.5 in.; 3.90 Ratio

9.25 in.; Reverse Rotation; 4.88 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 4.88 Ratio

9.25 in.; Reverse Rotation; 5.38 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 5.38 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 5.38 Ratio

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set Dana 44; Standard Rotation; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set~Dana 44; Standard Rotation; 4.56 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.38 Ratio Dana 44; Standard Rotation; 5.38 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For GM 8.5"/8.625" (10 Bolt); 3.23 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier

GM 8.25 in.; IFS; Reverse Rotation; 3.23 Ratio. Fits 3.23 & Down Carrier Case

3.73 Ratio Thick Gear

8.25 in.; Reverse Rotation; 4.56 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio; Fits 3.42 and Up Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 4.56 Ratio

GM 8.25 in. IFS Reverse Rotation; 3.08 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 3.08 Ratio; Fits 3.23 & Down Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 3.08 Ratio

8.25 in.; Reverse Rotation; 4.11 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio; Fits 3.42 and Up Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 4.11 Ratio

Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; Standard Rotation; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 5.13 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

8.25 in.; Reverse Rotation; 4.88 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio; Fits 3.42 and Up Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 4.88 Ratio

8.5 in./8.6 in. 10 Bolt; 4.11 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 4.10 Ratio~GM 8.5 in.; 4.11 Ratio

9.25 in.; Reverse Rotation; 5.13 Ratio GM 9.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio~GM 9.25 in.; IFS; Reverse Rotation; 5.13 Ratio

For Dana 44; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

3.42 Gear Ratio

3.73 Gear Ratio

3.08 Gear Ratio

10.5 in. 14 Bolt; 4.56 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 4.56 Ratio; Ring and Pinion Set; Fits 4 series 4.56 & Up Carrier~GM 10.5 in; 14 Bolt Cover; 4.56 Ratio

8.5 in./8.6 in. 10 Bolt; 2.76 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 2.73 Ratio~GM 8.5 in.; 2.76 Ratio

10.5 in. 14 Bolt; 3.21 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 3.21 Ratio; Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; 3.21 Ratio

10.5 in. 14 Bolt; 3.42 Ratio GM 10.5 in Rear; w/ 14 Bolt Cover; 3.42 Ratio; Ring and Pinion Set; Fits 3 series 4.10 & Down Carrier~GM 10.5 in; 14 Bolt Cover; 3.42 Ratio

8.25 in.; Reverse Rotation; 3.42 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 3.42 Ratio; Fits 3.42 and Up Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 3.42 Ratio

For GM 8.5"/8.625" (10 Bolt); 5.38 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier; Requires Notched Cross Pin Part# 80-0272-1

For GM 8.5"/8.625" (10 Bolt); 5.57 Ratio; Requires a 2.73 and Numerically Higher Ratio Carrier; Requires Notched Cross Pin Part# 80-0272-1

For GM 10.5" (14 Bolt); 5.38 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier

8.25 in.; Reverse Rotation; 3.73 Ratio GM 8.25 in. Front; IFS; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio; Fits 3.42 and Up Carrier Case~GM 8.25 in.; IFS; Reverse Rotation; 3.73 Ratio

8.5 in./8.6 in. 10 Bolt; 3.08 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.08 Ratio~GM 8.5 in.; 3.08 Ratio

10.5 In. Ring Gear w/4.56 Axle Ratio wo/Thick Gear for Carrier 3.08 Ratio and Lower

For GM 8.5" - Ring and Pinions Including Timken Bearing Kits; 4.11 Ratio; Fits 2.73 and Higher Carrier

For GM 8.5" - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; Fits 2.73 and Higher Carrier

9.5 In. Ring Gear w/3.73 Axle Ratio

For GM 8.5" - Ring and Pinions Including Timken Bearing Kits; 4.30 Ratio; Fits 2.73 and Higher Carrier

For GM 8.5" - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio; Fits 2.73 and Higher Carrier

For GM 9.25" IFS and GM 9.5" - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio

For GM 9.25" IFS and GM 9.5" - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio

For GM 9.25" IFS and GM 9.5" - Ring and Pinions Including Timken Bearing Kits; 4.10 Ratio; 4.10 Ratio

For GM 9.25" IFS and GM 9.5" - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio

For GM 9.25" IFS and GM 9.5" - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio

For GM 9.25" IFS and GM 9.5" - Ring and Pinions Including Timken Bearing Kits; 4.10 Ratio

For GM 9.25" and GM 10.5" - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; Fits 4.10 and Lower Carrier Rear

For GM 9.25" and GM 10.5" - Ring and Pinions Including Timken Bearing Kits; 4.10 Ratio; Fits 4.10 and Lower Carrier Rear

For GM 9.25" and GM 10.5" - Ring and Pinions Including Timken Bearing Kits; 4.88 Ratio; Fits 4.10 and Lower Carrier Rear

For GM 9.25" and GM 10.5" - Ring and Pinions Including Timken Bearing Kits; 4.56 Ratio; Fits 4.56 and Higher Carrier