GMC K2500 Drive Shaft Replacement

It fits vehicles with an automatic transmission, a floor shift, and an 8-lug wheel. It is compatible with vehicles equipped with a 4L60E transmission and a 3-switch dash control (option code NP1). It is for vehicles without a 4-switch dash control.

Condition: Excellent (A)
Mileage: 144,400 miles

ID No. DAS w/RPO Code C6P (8,600 Lb. GVW)

w/RPO Code C6P (8,600 Lb. GVW)

ID No. DAT wo/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)

with 29.53 (in) Long Driveshaft Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side

1 Piece Shaft Assembly

with 31.73 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

with 31.89 (in) Long Driveshaft with 7200 (lb) Gross Vehicle Weight (GVW) Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

ID No. DAU w/RPO Code C5Z (7,200 Lb. GVW)

2 Piece Shaft Assembly w/RPO Code C5Z (7,200 Lb. GVW)

ID Code CMJ

2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)

2 Piece Shaft Assembly w/RPO Code 1TA (Full Floating Axle)