GMC K2500 Universal Joint Replacement

For Use w/297X s/Aftermarket Axles GM 8.5 in.; Full Circle Snap Rings; fits 297X U-Joint with aftermarket axle

Standard Grade Grease Fitting in Cross 1.063" Bearing Cap Diameter

Standard Grade Grease Fitting in Cross 2 Joint Rear Driveshaft 2 Joint Front Driveshaft Incl. Inside and Outside Lock Rings

with 1 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

Standard Grade Grease Fitting in Cross 1.188" Bearing Cap Diameter Outside Lock Rings

Standard Grade Grease Fitting in Cross 3 Joint Rear Driveshaft Outside Lock Rings 2 Joint Front Driveshaft

with 2 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Premium with Lube Fitting in Body

Standard Grade Grease Fitting in Cross 1.125" Bearing Cap Diameter Incl. 4 Inside Lock Rings

with 1-1/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft Yoke Greasable Premium with Lube Fitting in Body with Steel Driveshaft & Steel Driveshaft Yoke

Standard Grade Sealed Unit

with 1-1/8 (in) Outside Diameter Bearing(s) Premium

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; Premium U-Joint w/ 2 Joint Shaft

Standard Grade Grease Fitting in Bearing Cap 3 Joint Front Driveshaft

Grease Fitting in Cross Performance Grade 1.063" Bearing Cap Diameter

Grease Fitting in Cross Performance Grade Inside Lock Rings

Grease Fitting in Cross Performance Grade

Standard Grade Grease Fitting in Cross

1.125 in. Bearing Cap Diameter with 2.560 in. Inside Lock-Up with 3.622 in. Outside Lock-up ; Premium U-Joint

1.065 Bearing Cap Diameter with 3.625 Outside Lock-up ; Premium U-Joint

Standard Grade Sealed Unit 1.188" Bearing Cap Diameter Outside Lock Rings

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; For Aluminum Drive Shaft w/ 2 Joint Shaft

Performance Grade Sealed Unit

with 1 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

1.125 Bearing Cap Diameter with 2.557 Inside Lock-Up ; Premium U-Joint

1.188 (in) Bearing Caps with 1-3/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350

with 2 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Non-Greasable Super Strength U-Joint

1.188 in. Bearing Cap Diameter with 2.188 in. Inside Lock-Up ; Brute Force Non Greaseable

with 1-1/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft Yoke 1.063 (in) Bearing Caps Non-Greasable Super Strength U-Joint

1.063 Bearing Cap Diameter with 3.622 Outside Lock-up ; For Aluminum Drive Shaft

Grease Fitting in Cross Performance Grade

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; Brute Force Greaseable w/ 2 Joint Shaft

with 1-1/8 (in) Outside Diameter Bearing(s) Non-Greasable Super Strength U-Joint

1.125 Bearing Cap Diameter with 2.557 Inside Lock-Up ; Brute Force Non Greaseable

1.188 (in) Bearing Caps with 1-3/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint

with 1.063 (in) & 1.125 (in) Bearing Cup Diameter Greasable Premium

1.063 Bearing Cap Diameter with 3.622 Outside Lock-up ; Brute Force Non Greaseable

1.063 Bearing Cap Diameter with 3.622 Outside Lock-up ; Brute Force Greaseable

with 3.622 Outside Lock-up 1.188 Bearing Cap Diameter ; Brute Force Non Greaseable

with 2 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Greasable Super Strength U-Joint

with 1-1/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft Yoke 1.063 (in) Bearing Caps Greasable Super Strength U-Joint

Performance Grade Grease Fitting in Bearing Cap

with 3.622 Outside Lock-up 1.188 Bearing Cap Diameter ; Brute Force Greaseable

1.125 Bearing Cap Diameter with 2.557 Inside Lock-Up ; Brute Force Greaseable

with 1-1/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft Yoke Greasable Premium with Lube Fitting in Bearing Cup

with 1 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

1.188 in. Bearing Cap Diameter with 2.188 in. Inside Lock-Up with 3.220 in. Outside Lock-up ; Brute Force Greaseable

1.125 in. Bearing Cap Diameter with 2.560 in. Inside Lock-Up with 3.622 in. Outside Lock-up ; Brute Force Greaseable

with 1-1/8 (in) Outside Diameter Bearing(s) Greasable Super Strength U-Joint

1.125 in. Bearing Cap Diameter with 2.560 in. Inside Lock-Up with 3.622 in. Outside Lock-up ; For Aluminum Drive Shaft

Sealed Unit Coated for Aluminum Driveshaft

Grease Fitting in Cross 2 Joint Rear Driveshaft Coated for Aluminum Driveshaft 2 Joint Front Driveshaft

Grease Fitting in Cross 2 Joint Rear Driveshaft Coated for Aluminum Driveshaft 2 Joint Front Driveshaft

Non-Greasable Super Strength U-Joint

Greasable Super Strength U-Joint

1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~GM 8.5 in.

Mechanics 3R 2.556 in. Snap Ring Span; 1.125 in. Cap Dia.; Inside Snap Ring GM 9.25 in.; IFS~Mechanics 3R U/Joint; with zerk fitting.

Lifetime Series; 1.718 in. Snap Ring Span; 1.062 in. Cap Dia.; Inside Snap Ring 1310 Lifetime U/Joint. Without zerk fitting.~GM 8.5 in.

3.625 in. Snap Ring Span; 1.062 in. Cap Diameter; Outside Snap Ring; w/Zerk Fitting 1330 U/joint with 1 1/16 in. caps.~Dana 44; Standard Rotation

Lifetime Series; 3.625 in. Snap Ring Span; 1.062 in. Cap Dia.; Outside Snap Ring 1330 Lifetime U/Joint. Without zerk fitting.~Dana 44; Standard Rotation

1330 Yoke; To Mechanics 3R Adapter 1330 to Mechanics 3R Lifetime conversion U/Joint; without zerk fitting.~Dana 44; Standard Rotation

Dual Size Cap; 3.625 in. Snap Ring Span; One Set Of Caps Is 1.125 in. Dia.; The Other Is 1.062 in. Dia.; Ford 8.8 in.; Outside Snap Ring 1330 U/Joint; with zerk fitting. Two caps are 1 1/8 in. diameter and two caps are 1 1/16 in. diameter.~Dana 44; Standard Rotation

1350 Joint; w/Zerk Fitting; 3.625 in. Snap Ring Span; 1.118 in. Cap Dia.; Outside Snap Ring 1350 U/Joint; with zerk fitting.~GM 10.5 in.; 14 Bolt Cover~GM 9.5 in.; 14 bolt cover

Lifetime Series ; 3.625 in. Snap Ring Span; 1.188 in. Cap Dia.; Outside Snap Ring 1350 Lifetime U/Joint; without zerk fitting.~GM 10.5 in; 14 Bolt Cover~GM 9.5 in.; 14 bolt cover

Adapts 1310 Yoke To 1330 Yoke; 1310 Side 3.219 in. Span; 1.062 in. Caps; 1330 Side 3.625 in. Span; 1.062 in. Caps; Both Sides Are Outside Snap Ring 1310 to 1330 conversion U/Joint. All caps are 1 1/16 in. diameter.~GM 8.5 in.

Dana 30/44; GM 8.5 in. 1310 Lifetime axle U/Joint; without zerk fitting.~GM 8.5 in.

1410 Yoke; w/Zerk Fitting; 4.188 in. Snap Ring Span; 1.118 in. Cap Dia. 1410 driveline U/Joint; with zerk fitting.~GM 10.5 in.; 14 Bolt Cover

Mechanics 3R Lifetime Series; 2.556 in. Snap Ring Span; 1.125 in. Cap Dia.; Inside Snap Ring GM 9.25 in.; IFS~Mechanics 3R Lifetime U/Joint; without zerk fitting.

1410 Lifetime Series; 4.188 in. Snap Ring Span; 1.188 in. Cap Dia.; Outside Snap Ring 1410 Lifetime driveline U/Joint; without zerk fitting.~GM 10.5 in.; 14 Bolt Cover

Adapts 1350 Yoke To 1410 Yoke 1350 to 1410 conversion U/Joint.~GM 10.5 in; 14 Bolt Cover~GM 9.5 in.; 14 bolt cover

1310 Yoke To Mechanics 3R Adapter 1310 to Mechanics 3R U/Joint; without zerk fitting.~GM 8.5 in.

Adapts 1350 Yoke To Mechanics 3R 1350 to Mechanics 3R conversion joint.~GM 10.5 in.; 14 Bolt Cover~GM 9.5in.; 14 bolt cover

Dana 30/Reverse/44 Reverse; Super Joint; One Single Joint GM 8.5 in.; Super Joint; One Single Joint

8.5 in. 10 Bolt; Dana 44 Reverse; Replacement; Qty 2; 297X 4340 Chrome Moly Super Joints GM 8.5 in.; Replacement; Qty 2; 297X 4340 Chrome Moly Super Joints

8.5 in. 10 Bolt; Dana 44/30/Reverse/30; Kit Includes [2] 4340 Chrome Moly Super Joints; Grease; And Gun GM 8.5 in.; Kit Includes [2] 4340 Chrome Moly Super Joints; Grease; And Gun

with 1.063 (in) & 1.125 (in) Bearing Cup Diameter Greasable Super Strength U-Joint with Combination U-Joint (354 x 534G)

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; Brute Force Non Greaseable w/ 2 Joint Shaft

with 3.625in Outside Snap Ring Dimension with Outside Snap Rings 1.062in Bearing Cap Diameter Greaseable

1.188 (in) Bearing Caps with 1-3/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint

Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable

Greaseable Inside Snap Ring Dimension of 2.556in 1.062in Bearing Cap Diameter 1.125in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension

with 1 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable

with Aluminum Driveshaft Yoke with Inside & Outside Snap Rings Premium Chemically Coated

with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable

with 3.625in Outside Snap Ring Dimension with New Replacement Part 1.062in Bearing Cap Diameter Non-Greasable with Outside Snap Rings

Greaseable Inside Snap Ring Dimension of 2.556in 1.062in Bearing Cap Diameter 1.125in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension

with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable

Inside Snap Ring Dimension of 2.556in Non-Greasable 1.062in Bearing Cap Diameter 1.125in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension

with 1-1/16 (in) Outside Diameter Bearing(s) Greasable Premium with Aluminum-Graphite Driveshaft

Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable

OE Design with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Non-Greasable with Uncoated

Greaseable with 1 Piece Rear Driveshaft 1.188in Bearing Cap Diameter with 4.188in Outside Snap Ring Dimension

with 3.625in Outside Snap Ring Dimension with Outside Snap Rings 1.062in Bearing Cap Diameter Greaseable

with 1 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

with 1.063 (in) & 1.125 (in) Bearing Cup Diameter Non-Greasable Super Strength U-Joint

Non-Greasable with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Chemically Coated with Aluminum Driveshaft

1.188in Bearing Cap Diameter 1410 Series with Cap Diameter 1.188in with Cap to Cap Dimension 4.188in with Dana 1410 Series Drive Shaft with Outside Snap Rings 1 Piece Driveshaft Greaseable with 4.188in Outside Snap Ring Dimension

Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable

with 3.625in Outside Snap Ring Dimension with Outside Snap Rings 1.062in Bearing Cap Diameter Greaseable

with 3.625in Outside Snap Ring Dimension with Outside Snap Rings 1.062in Bearing Cap Diameter Greaseable

Non-Greasable with 1 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Inside Snap Ring Dimension of 2.556in

with 1-3/16 (in) Outside Diameter Bearing(s) Premium with Aluminum Driveshaft with Lube Fitting in Body

Non-Greasable OE Design 1.188in Bearing Cap Diameter with 1 Piece Rear Driveshaft with 4.188in Outside Snap Ring Dimension

with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable

Greaseable with 1 Piece Rear Driveshaft 1.188in Bearing Cap Diameter with 4.188in Outside Snap Ring Dimension

with 3.625in Outside Snap Ring Dimension with Uncoated 1.188in Bearing Cap Diameter Greaseable

Chemically Coated with Inside & Outside Snap Rings

1.188 (in) Bearing Caps with 1-3/16 (in) Outside Diameter Bearing(s) with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint Optional

Greaseable with 1 Piece Rear Driveshaft 1.188in Bearing Cap Diameter with 4.188in Outside Snap Ring Dimension

Non-Greasable with Aluminum Driveshaft

with 3.625in Outside Snap Ring Dimension with Blue Coated 1.188in Bearing Cap Diameter Non-Greasable