GMC K3500 Differential Bearing Kit Replacement

For Dana 70, 80; Carrier Bearing Kit

For Dana 70HD; For OE Ring and Pinion; Carrier Bearing Kit Includes Koyo Bearings

For Dana 60; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Dana 70HD; For OE Ring and Pinion; Carrier Bearing Kit Includes Timken Bearings

For GM 10.5" (14 Bolt); 1st Design; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 60; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 70; Inner Bearing HM807040/010, Carrier Bearing 382S/387A; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Standard Design; Dana 60 Axle

For GM 10.5" (14 Bolt); 1st Design; 4.56 and Higher Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 9.25"; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 10.5" (14 Bolt); 2nd Design; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 10.5" (14 Bolt); 1st Design; 4.10 and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 9.25"; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 9.25"; Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.56 Ratio and Higher Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Dana 80; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 60; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.56 Ratio and Higher Case; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 9.25"; Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), and Thread Locking Compound

For Dana 60; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Dana 80; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer. Shims (Pinion, Carrier), Slinger, Ring Gear Bolts, and Thread Locking Compound

For Dana 70; Inner Bearing HM807040/010, Carrier Bearing 382S/387A; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffles, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Shims (Pinion, Carrier), Slinger, Ring Gear Bolts, and Thread Locking Compound

For GM 9.25"; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 9.25"; Master Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); 1st Design; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Standard Design; 10.5 In. Ring Gear

For Dana 70; Inner Bearing HM807040/010, Carrier Bearing 382S/387A; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seal (Inner Axle, Pinion), and Thread Locking Compound

For GM 10.5" (14 Bolt); 1st Design; 4.10 and Lower Case; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); 1st Design; 4.56 and Higher Case; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Dana 60; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 9.25"; Master Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 9.25"; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 10.5" (14 Bolt); 2nd Design; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Improved Design; Dana 60 Axle

For GM 10.5" (14 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 70; Inner Bearing HM807040/010, Carrier Bearing 382S/387A; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Shims (Pinion, Carrier), Slinger, Ring Gear Bolts, and Thread Locking Compound

Standard Design; 10.5 In. Ring Gear

For GM 10.5" (14 Bolt); 4.56 Ratio and Higher Case; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.56 Ratio and Higher Case; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); 4.10 Ratio and Lower Case; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 10.5" (14 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For Dana 80; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Improved Design; 10.5 In. Ring Gear

For Dana 80; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Shims (Pinion, Carrier), Slinger, Ring Gear Bolts, and Thread Locking Compound

For Dana 70HD; Inner Bearing HM807040/010, Carrier Bearing 469/453X; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Improved Design; 10.5 In. Ring Gear

For Dana 80; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Baffle, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Shims (Pinion, Carrier), Slinger, Ring Gear Bolts, and Thread Locking Compound