GMC P3500 Exhaust Pipe Flange Gasket Replacement

Donut Packing Ring 2-17/32 (in) Inside Diameter

Donut Packing Ring 2-1/32 (in) Inside Diameter

Optional Sintered Metal 2-17/32 (in) Inside Diameter

Optional Sintered Metal 2-1/32 (in) Inside Diameter

ID 2.00in, OD 2.50in Ring Type C Coil Wrap

Type C Graphite/Wire Mesh Exhaust Manifold to Exhaust Pipe

3 Bolt(s)

1-63/64in Inside Diameter Graphite

2-11/16in Bolt Pattern with 3 Bolt Holes ; Heat Riser

2-1/2in I.D.; Sintered Metal

Flange Type Composite Exhaust Manifold to Exhaust Pipe with 2.125in I.D.

Original Equipment (OE) Part Number 15954812 4 Bolt Gasket

Forward Control

2-33/64in Inside Diameter Graphite Rope Packing

2 Bolt(s)

New Replacement; Heat Riser

Ring Type E Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Donut Packing Ring 2-3/32 (in) ID Steel Sleeve

Ring Type B Sintered Metal Exhaust Manifold to Exhaust Pipe

ID 2.00in, OD 2.50in Ring Type B Sintered Metal

with Dual Catalytic Converters

Ring Type E, With 1 3/4in I.D. Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Ring Type E, With 2 3/32in I.D. Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Donut Packing Ring 2-1/2 (in) Inside diameter Steel sleeve to manifold

Left Hand and Right Hand

1-3/4in I.D. 1.750in Inside Diameter Rope Packing

with Federal Emissions System with H5D Emissions System After 01/01/1985

Donut Packing Ring

Ring Type E, with 2.5in Pipe Graphite/Wire Mesh with Sleeve Exhaust Manifold to Exhaust Pipe

1-1/4in Inside diameter Gasket to Pipe 2-1/2in Inside diameter Steel sleeve to manifold Rope Packing

Ring Type D Coil Wrap with Sleeve Exhaust Manifold to Exhaust Pipe