GMC S15 Jimmy Suspension Shock Absorber Replacement

Inc. ZQ8 Sport Suspension

w/0-2 in. Lift

Recommended OE Application -Specific Replacement

FRONT SHOCK - 3" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 12.3" EXTENDED, 8.1" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

For PN[K2025/K2026/K2084/K4051/K3018/K3001/K2166/K4089/K4090/K4085/K4086/K2019/K2020/K2085/K2027/K1050/K2088/K2108/K2109/K4052]; w/2.5 - 5.5 in. Lift

REAR SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN INCLUDES QUANTITY 1, 1.5" WIDE SLEEVE FOR UP TO A 9/16+"/14MM BOLT 24.5" EXTENDED, 14.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Recommended OE Application -Specific Replacement

Recommended OE Application -Specific Replacement

Recommended OEM Replacement

FRONT SHOCK - 2" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 13.3" EXTENDED, 8.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Recommended OEM Replacement

25.07 Extended 15.07 Collapsed Wheel Drive: 4WD Lift: With Rear 0 in. - 1 in. Lift

14.42 Extended 9.54 Collapsed Lift: With Front Factory Ride Height

24.00 Extended 14.50 Collapsed Wheel Drive: 4WD Lift: With Rear 0 in. - 1 in. Lift

With Bar Pin Upper Mount and Eye Lower Mount Sold Individually 26.07 Extended 15.57 Collapsed Wheel Drive: 4WD Lift: With Rear 5 in. - 6 in. Lift

Recommended OEM Replacement

Monotube Performance Upgrade

Performance Monotube Shock Absorber

Monotube Performance Upgrade

Performance Monotube Shock Absorber

Monotube Performance Upgrade

with Front Raised Height 0 (in)

with Rear Raised Height 0 (in)

Lowering Rate: F: 1.0-3.0"

Lowering Rate: R: 0.0-3.0"

Lowering Rate: F: 0.0-2.0"

Lowering Rate: R: 3.0-5.0"

Lowering Rate: F: 2.0-5.0"

Lowering Rate: F: 0.0"

with Front Raised Height 0 (in)

with Front Raised Height 0 (in)

with Rear Raised Height 0 (in)

Maximum Monotube Performance Upgrade Standard Suspension or Lowered Suspensions up to 2 inches

Maximum Monotube Performance Upgrade Standard Suspension

SN5: Fits Vehicles with 3"-5" Rear Lowering Lowering Rate: R: 3.0-5.0"

SN14: Fits Vehicles with 0"-3" Rear Lowering

Maximum Monotube Performance Upgrade Standard Non-Lifted Suspensions

Lift Replacement Shocks Lift = 0-2

Maximum Monotube Performance Upgrade Lowered 4 Inches

90/10 Series; Front; w/0 in. Lift/Drop Not For Street Use

with Rear Raised Height 0 (in)

with Front Raised Height 0 (in) Front Shock must be Installed Rod End Down (without shock boot kit)

70/30 Series; Front; w/0 in. Lift/Drop

Ridetech HQ Series Shock Single Adjustable 4.75in Stroke T-Bar/Stud Mounting 8.55in x 13.3in