GMC Savana 1500 Differential Replacement

GM 7.2 in.; IFS

30 Spline; 1.32 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.5 in./8.6 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.

30 Spline; 1.50 in. Axle Shaft Diameter; Rear 10.5 in.; All Ratios Replaces Conventional Diff. Internals In Certain 1973 Thru Present GM Axles~If Installed In GM Axle Equiped w/Optional Eaton Diff. Will Require~New Gear Support Case Assembly GM PN[6258336 Or 6258340] Depending On Ratio

30 Spline; 1.32 in. Axle Shaft Diameter; 2.73 And Up Rng Gear Pin. Rat;Manual Locking Hubs Are Recomnd For Some Appl.; 8.5 in./8.6 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.~Manual Locking Hubs Recommended For Front Axle Applications

33 Spline; 1.37 in. Axle Shaft Diameter; 9.5 in.

9.5/9.75 in.; 33 Spline; 3.42-3.73 Ring Gear Pinion Ratio Factory Oil Drain Plug May Require Relief Grinding For Correct Fitment

8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal

30 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear 10.5 in.

GM 10.5 in.; 14 Bolt; 30 Spline; 4.10 And Down Ring Gear Pinion Ratio; 1.50 in. Axle Shaft Diameter

33 Spline; 12 Bolt Yukon Dura Grip Positraction; GM 9.5 in. & GM 9.76 in. Rear; w/ 12 bolt cover; 3.42 & Up Gear Ratio

30 Spline; 1.32 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.5 in.; Rear 8.6 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.

2.73 Gear Ratio And Up GM 8.6 in.; 2.73 Gear Ratio And Up~GM 8.6 in.; Yukon Grizzly Locker; 2.73 Gear Ratio And Up; 1.78 in. Bearing Journals;

33 Spline; 1.37 in. Axle Shaft Diameter; Rear 9.5 in.; All Ratios

30 Spline; Rear 11.5 in.; 1.55 in. Axle Shaft Diameter; All Ratios

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

30 Spline; 1.32 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; 8.5 in./8.6 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.

30 Spline; 1.55 in. Axle Shaft Diameter; Rear 11.5 in.; All Ratios

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60