1999-2002 GMC Sierra 2500 Transfer Case Shift Motor (Used OEM)

Partslink #: 420-00142

It is for vehicles equipped with option code NP8.

Condition: Excellent (A)
Mileage: 68,300 miles

$99.95 View part →

✓ In Stock

2001-2002 GMC Sierra 2500 Electronic Shift 2-Speed Transfer Case Motor (Used OEM)

Partslink #: 420-00144

Condition: Excellent (A)

$119.95 View part →

✓ In Stock

2001-2002 GMC Sierra 2500 Transfer Case Motor (Dorman)

Partslink #: 600-907

Fits New Process 263 Oval Plug w/2 Pins Rectangular Plug w/6 Pins w/RPO Code NP1 (2 Speed, Electronic Shift, Transfer Case)

$157.95 View part →

Connector Gender: Female, Connector Quantity: 2, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Type: Blade, Wire Quantity: 2, Wiring Harness Included: Yes, Wiring Harness Length: 15.75

✓ In Stock

2001-2002 GMC Sierra 2500 Transfer Case Motor (Cardone)

Partslink #: 48-104

with 2 Terminal Harness Plug with 6 Terminal Plug(s) Option Codes are on the Service Parts Identification Sticker with 2 Speed Electronic Shift Transfer Case (NP1)

$202.83 View part →

Connector Gender: Female, Connector Quantity: 2, Connector Shape: Rectangle, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Type: Blade, Wiring Harness Included: No

✓ In Stock

1999-2000 GMC Sierra 2500 Transfer Case Motor (Cardone)

Partslink #: 48-106

with 6 Terminal(s) with 2 Terminal Plug(s) Option Codes are on the Service Parts Identification Sticker with 2 Speed Electronic Shift Transfer Case (NP1)

$218.42 View part →

✓ In Stock

2003-2004 GMC Sierra 2500 Transfer Case Motor (Dorman)

Partslink #: 600-909

Fits NP263 Transfer Case w/3 Position Selector Switch w/RPO Code NP1 (2 Speed, Electronic Shift, Transfer Case)

$225.95 View part →

✓ In Stock

2001-2002 GMC Sierra 2500 Transfer Case Motor (Dorman)

Partslink #: W0133-2080122

Transfer Case Code NP1

$232.44 View part →

Connector Gender: Female, Connector Quantity: 2, Connector Shape: Square, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Type: Blade, Wire Quantity: 4, Wiring Harness Included: Yes, Wiring Harness Length: 15.75

✓ In Stock

1999-2002 GMC Sierra 2500 Transfer Case Motor (Cardone)

Partslink #: 48-105

with 4 Terminal Harness Plug with 6 Terminal Plug(s) Option Codes are on the Service Parts Identification Sticker with 2 Speed Push Button with Automatic Shift Transfer Case (NP8)

$241.89 View part →

✓ In Stock

2003-2004 GMC Sierra 2500 Transfer Case Motor (Dorman)

Partslink #: 600-910

Fits NVG246 Transfer Case w/4 Position Selector Switch w/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)

$245.95 View part →

✓ In Stock

1999-2002 GMC Sierra 2500 Transfer Case Motor (Dorman)

Partslink #: 600-901

Fits New Venture Gear 136/236/246 Square Plug w/4 Pins w/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)

$261.53 View part →

✓ In Stock

2000-2002 GMC Sierra 2500 Transfer Case Motor (Dorman)

Partslink #: W0133-2080144

$288.06 View part →

✓ In Stock

1999-2000 GMC Sierra 2500 Transfer Case Motor (Cardone)

Partslink #: 83-106

with 6 Terminal(s) with 2 Terminal Plug(s) Option Codes are on the Service Parts Identification Sticker with 2 Speed Electronic Shift Transfer Case (NP1)

$300.87 View part →

Connector Gender: Female, Connector Quantity: 1, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Quantity: 5, Terminal Type: Blade, Wire Quantity: 5, Wiring Harness Included: Yes, Wiring Harness Length: 254

✓ In Stock