GMC Sonoma Exhaust Muffler Replacement

Cut To Fit Modifications and/or Additional Parts May Be Required for Installation

Requires Extension Pipe And 35413 with 18 (in) Muffler Body Modifications and/or Additional Parts May Be Required for Installation

DIRECT FIT MSL/MAXIMUM Muffler

with 18 (in) Muffler Body Modifications and/or Additional Parts May Be Required for Installation

with Wide Stance Package

If welded assembly, replace all required parts

If welded assembly, replace all required parts

If welded assembly, replace all required parts

without Syclone Or HD Off Road Package If welded assembly, replace all required parts

DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

Universal; Oval; 4.25 in. x 9.75 in.; Side - Center; 2.5 in. ID; 14 in. Shell Length; 18.5 in. Overall Length

If welded assembly, replace all required parts

with High Rider Package If welded assembly, replace all required parts

with Wide Stance Package

Universal; Oval; 4.25 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25.5 in. Overall Length Dual Exhaust~Under 8500 Gross Vehicle Weight~LH/RH Side

Oval; 2.5 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Offset/Center Reversible; Stainless Steel w/Wide Stance Suspension Package

2.25 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Universal; Oval; 2.5 in. Inlet/Outlet; 4.25 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Offset/Center; Reversible; Stainless Steel

Oval; 2.5 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 20 in. Muffler L/25 in. Overall L; Offset/Center; Reversible; Stainless Steel

Universal; Oval; 2.5 in. Inlet/Outlet; 4.25 H in. x 9.75 in. W x 20 in. Muffler L/25 in. Overall L; Offset/Center; Reversible; Stainless Steel Dual Exhaust