GMC Suburban Differential Carrier Replacement

Dana 30 Reverse; Left Hand Thread Dana 44; Standard Rotation; Power Lok Case Bolt; Left Hand Thread

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard Rotation; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Works w/Most Differentials GM 12 Bolt Truck; Carrier shim driver kit

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; Standard Rotation; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44; Standard Rotation

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard Rotation; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; Standard Rotation; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 35 Splines with Dana 60 Axle with Spider Gears

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 32 Splines with Dana 60 Axle

with Empty Case with GM 8.25 IFS Axle 12 Bolt with 3.73 or Higher Rear Axle Ratio with 30 Spline Teeth with Open Differential

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle