Honda Insight Disc Brake Caliper Replacement

2010-2014 Honda Insight Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99-00929A

Supplied w/ Mounting Bracket

$54.52 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Right (BBB Industries)

Partslink #: 99P00929B

Supplied w/ Mounting Bracket

$57.94 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Left (BBB Industries)

Partslink #: 99P00929A

Supplied w/ Mounting Bracket

$57.94 View part →

2001-2006 Honda Insight Disc Brake Caliper - Front Right (Raybestos)

Partslink #: FRC11666

Replaces RC11666

$58.22 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Left (ACDelco)

Partslink #: 18FR1205

$71.91 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Right (ACDelco)

Partslink #: 18FR1206

$70.14 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Left (Autopart International)

Partslink #: W0133-3492756

$83.75 View part →

2019-2022 Honda Insight Disc Brake Caliper - Rear Right (Centric)

Partslink #: 141.40593

$82.93 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Left (Skyward )

Partslink #: SK19B1832

w/ Metal Piston; Supplied with Mounting Bracket; Installation Hardware Included

$84.60 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Powder Coated, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 117, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.72, Mounting Hole Thread Diameter: 0.72, Mounting Hole Thread size: M12 X 1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.493, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2010-2014 Honda Insight Disc Brake Caliper - Front Right (Autopart International)

Partslink #: W0133-3407564

$83.75 View part →

Abutment Clips Included: No, Anti-Rattle Spring Included: Yes, Bleeder Screw Cap Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Gray, Caliper Finish: Powder Coated, Caliper Slides Included: Yes, Caliper Type: Floating, Casting Number: 118, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, Dust Boots Included: Yes, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: 0.394, Inlet Thread Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.72, Mounting Hole Thread Diameter: 0.72, Mounting Hole Thread size: M12 X 1.25, Pad Wear Sensor Included: No, Pads Included: No, Piston Diameter: 1.493, Piston Material: Steel, Piston Quantity: 1, Product Condition: Remanufactured, Rust Resistant Coating: Yes

2019-2022 Honda Insight Disc Brake Caliper - Rear Left (Cardone)

Partslink #: 19-B7361

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$86.03 View part →

2019-2022 Honda Insight Disc Brake Caliper - Rear Right (Cardone)

Partslink #: 19-B7360

Installation Hardware Included with Metal Piston Supplied with Mounting Bracket

$86.17 View part →

Abutment Clips Included: Yes, Anti-Rattle Spring Included: No, Bleeder Screw Included: Yes, Bleeder Screw Quantity: 1, Bleeder Thread Size: M10x1.0, Bracket Included: Yes, Caliper Color: Silver, Caliper Finish: Zinc Plated, Caliper Slides Included: Yes, Caliper Type: Floating, Contains Electronic Components: No, Disc Brake Caliper Casting Material: Cast Iron, Does it require SDS: No, FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations., FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container., FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation., FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish., FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder., FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins., FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications., FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?, FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?, FAQ_Q3: Car Pulls To One Side During Braking. Why?, FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?, FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?, FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?, FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?, Grade Type: Regular, Inlet Fitting Type: Banjo, Inlet Port Size: M10x1.0, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Bolt Included: No, Mounting Hardware Included: Yes, Mounting Hole Diameter: 0.472, Mounting Hole Thread Diameter: 0.472, Pad Wear Sensor Included: Yes, Pads Included: No, Piston Diameter: 2.12, Piston Material: Steel, Piston Quantity: 1, Product Condition: New, Rust Resistant Coating: Yes

2019-2021 Honda Insight Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-4101363

$96.92 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Left (Cardone)

Partslink #: 2C-1832

Installation Hardware Included with Metal Piston Obsolete Supplied with Mounting Bracket

$118.44 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Right (Powerstop)

Partslink #: L1833

$119.02 View part →

2010-2014 Honda Insight Disc Brake Caliper - Front Left (Powerstop)

Partslink #: L1832

$119.02 View part →

2019-2022 Honda Insight Disc Brake Caliper - Rear Right (Powerstop)

Partslink #: L15157

$125.38 View part →

2019-2022 Honda Insight Disc Brake Caliper - Rear Left (Powerstop)

Partslink #: L15156

$125.38 View part →

2022 Honda Insight Disc Brake Caliper - Rear Right (Autopart International)

Partslink #: W0133-4655311

$197.39 View part →

2022 Honda Insight Disc Brake Caliper - Rear Left (Autopart International)

Partslink #: W0133-4655337

$191.60 View part →

2018-2022 Honda Insight Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 7,000 miles

$86.95 View part →

2019-2022 Honda Insight Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Please verify that your part identification number matches.

Condition: Excellent (A)
Mileage: 7,000 miles

$86.95 View part →

2018-2022 Honda Insight Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 25,000 miles

2019-2022 Honda Insight Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 25,000 miles

2018-2022 Honda Insight Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 29,000 miles

2019-2022 Honda Insight Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 29,000 miles

2018-2022 Honda Insight Disc Brake Caliper - Rear, Right (Passenger) (Used OEM)

Condition: Excellent (A)
Mileage: 40,000 miles

2019-2022 Honda Insight Disc Brake Caliper - Rear, Left (Driver) (Used OEM)

Condition: Excellent (A)
Mileage: 40,000 miles