International Scout II Differential Replacement

Dana 30/44 Reverse Dana 44~Dana 44; Standard Rotation~Outer slinger

Dana 25/27/30/44/50 Dana 44~Dana 44; Standard Rotation~Inner slinger

Dana 30; Standard Rotation

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 44; Bulkhead Quick-Disconnect Fitting~Dana 44; Standard Rotation; Bulkhead Quick-Disconnect Fitting

; Wiper Kit Retaining Bolt Front Knuckle Oil Wiper Kit Retaining Bolt

Dana 27/30/44; Small; w/8 Retaining Bolts Dana 27/30/44; Small; w/8 Retaining Bolts

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

Dana 30 Reverse; 27 Spline; 3.73 And Up Dana 30; Standard Rotation; 27 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; 27 Spline; 3.73 And Up Ratio

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up Dana 44; 30 Spline; 3.92 And Up~Dana 44; Standard Rotation; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

30 Spline; 3.73 And Up Dana 30; Standard Rotation; 30 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.73 And Up Ratio; Requires 30 Spline Axles

30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Dana 30; 30 Spline; 3.73 Ratio And Up Dana 30; Standard Rotation; 30 Spline; 3.73 Ratio And Up

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 30 Spline; 3.92 Ratio And Up~Dana 44; Standard Rotation; 30 Spline; 3.92 Ratio And Up

30 Spline; 3.73 Ratio And Down Dana 44; 30 Spline; 3.73 Ratio And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 Ratio And Down

Dana 30; 27 Spline; 3.73 Ratio And Up Dana 30; Standard Rotation; 27 Spline; 3.73 Ratio And Up

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required