International Scout II Drive Shaft Center Support Bearing Replacement

with 1.1811in & 30mm Inside Diameter Bearing(s) 3.50in Center Line Of Bearing To Mounting Face 89mm Center Line Of Bearing To Mounting Face with 1.50in Mounting with 38mm Mounting with Spicer Series 1260 accepted Complete Assembly

with 1.3780in & 35mm Inside Diameter Bearing(s) 2.28in Center Line Of Bearing To Mounting Face 58mm Center Line Of Bearing To Mounting Face with Cleveland S55 U-Joint(s) with 168mm Mounting with 6.62in Mounting with Spicer Series 1280, 1310, 1410 accepted

with 1.5750in & 40mm Inside Diameter Bearing(s) 2.48in Center Line Of Bearing To Mounting Face 63mm Center Line Of Bearing To Mounting Face with U-Shaped Bracket with 6C U-Joint(s) with 168mm Mounting with 6.62in Mounting with Dust Shields with Spicer Series 1480, 1550 accepted

Spicer 1280, 1310, 1330, 1410 Series 1.3780" Bearing I.D. Slip Yoke Style Without slingers

with Spicer 1280,1310 U-Joint(s)

with 1.7680in & 45mm Inside Diameter Bearing(s) 2.75in Center Line Of Bearing To Mounting Face 70mm Center Line Of Bearing To Mounting Face with 7C U-Joint(s) with 194mm Mounting with 7.62in Mounting with Spicer Series 1610, 1650 accepted

Spicer 1280, 1310 - 1.18 in. I.D. Bearing Only

with 1.9685in & 50mm Inside Diameter Bearing(s) 2.80in Center Line Of Bearing To Mounting Face 71mm Center Line Of Bearing To Mounting Face with 8C U-Joint(s) with 194mm Mounting with 7.62in Mounting with Spicer Series 1700, 1710 accepted

Spicer 1280, 1410 - 1.38 in. I.D. Bearing Assembly

Slip Yoke Style with 1.378 (in) Bearing Inside Diameter with 35 (mm) Bearing Inside Diameter with Spicer 1280,1310,1330,1410 U-Joint(s)

Spicer 1280, 1410 - 1.38 in. I.D. Bearing Only

Spicer 1280, 1310 - 1.18 in. I.D. Bearing Assembly

Spicer - 1.57 in. I.D.

with 2.3622in & 60mm Inside Diameter Bearing(s) 3.37in Center Line Of Bearing To Mounting Face 86mm Center Line Of Bearing To Mounting Face with 219mm Mounting with 8.62in Mounting with Spicer Series 1800, 1850 accepted

Spicer - 1.77 in. I.D.

Spicer - 2.36 in. I.D.