Isuzu Rodeo Differential Replacement

Dana 30/44 Reverse Dana 44~Outer slinger

Dana 25/27/30/44/50 Dana 44~Inner slinger

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 44; Bulkhead Quick-Disconnect Fitting

28 Spline; 1.20 in. Axle Shaft Diameter; 3.23 And Up Ring Gear Pinion Ratio; 7.5 in./7.625 in.

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

28 Spline; 1.20 in. Axle Shaft Diameter; 3.23 And Up Ring Gear Pinion Ratio; Rear 7.5 in./7.625 in./8.5 in./8.6 in.; Rear 9.5 in.

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 3.92 And Up Dana 44; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

7.625 in. 10 Bolt; 28 Spline GM 7.5 in. and 7.6 in.; 28 Spline~Yukon Dura Grip Positraction; GM 7.5 in. & 7.625 in. Rear; 3.23 & Up Ratios; 28 Spline

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Axle: DANA 44 Shaft: 33.3 (1.31") Spline: 30 Ratio: 4.13 and down

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 30 Spline; 3.92 Ratio And Up

30 Spline; 3.73 Ratio And Down Dana 44; 30 Spline; 3.73 Ratio And Down

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter