Jeep CJ7 Differential Carrier Replacement

Dana 30 Reverse; Left Hand Thread Dana 30; Standard Rotation; Power Lok Case Bolt; Left Hand Thread

For Dana 30; 3.73 and Higher; Empty Case; Open; Use With Internal Kit 2002914

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Dana 30; Reverse; w/Gasket/Shims/Ring Bolts; 2.75 To 3.54 Ratio

Dana 30; Reverse; 3.73 To 5.38 Ratio

Case Split 3.54 And Down Except without Spider Gears with Dana Model 30 Axle

Dana 44; 3.92 To 5.38 Ratio

Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Standard Rotation; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall

Dana 30/Reverse; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall Dana 30; Standard Rotation; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall

Case Split 3.73 And Up Except without Spider Gears with Dana Model 30 Axle

For Use w/Dana Spicer 30 Dana 30; Standard Rotation

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

Dana 30/Reverse; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket Dana 30; Bare Standard Open Carrier Case; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket~Dana 30; Standard Rotation; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket

with Dana Model 44 Axle without Limited Slip Differential Except without Spider Gears with 4.09 Gear Ratio with 4.56 Gear Ratio

with Spider Gears with 2.72 Gear Ratio with 3.31 Gear Ratio with 3.54 Gear Ratio with 3.73 Gear Ratio

Dana 44; w/Trac-Lok; Incl. Gasket/Bolts/Shims; 3.92 To 5.38 Ratio

Case Split 3.73 And Down with Dana Model 44 Axle with Open Differential

Dana 30; Accepts 3.73 Ratio in 1981; 4.09 Or 4.10 Ratio All Other Years

AMC 20;

For Dana 44; Loaded Case; Open; 30 Spline; 1.31" Spline Diameter

with 3.54 Gear Ratio with Dana Model 44 Axle Replaces OE Part Number(s) 83505431 with 2.72 Gear Ratio with 3.31 Gear Ratio with Limited Slip Differential with Spider Gears

with 3.92 or Higher Rear Axle Ratio with Dana 44 Axle with Trac Lok