Jeep Cherokee Differential Replacement

Dana 30/44 Reverse Dana 30; Reverse Rotation~Dana 44~Outer slinger

Dana 25/27/30/44/50 Dana 30; Reverse Rotation~Inner slinger

Dana 30; Reverse Rotation

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting AMC Model 35; Bulkhead Quick-Disconnect Fitting~Dana 30; Reverse Rotation; Bulkhead Quick-Disconnect Fitting

w/29 Spline Axle Shafts w/Standard Differential; For Use w/8.25 in. 10 Bolt Axle

w/3.92 And Higher Gear Ratio; For Use w/Dana 44

Standard; For Use w/3.55/3.73/4.11 Ratio; w/0.81 Bolt Length; For Use w/Dana 35

Gear Ratios- 3.73/4.10/4.56; Incl. Gear Set; For Use w/Dana 30

Incl. Gear Set; For Use w/Trac Lok; For Use w/Dana 35

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

Rear Ratios- 3.55/4.11/4.56; Incl. Gear Set; For Use w/Dana 35

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

Dana 30 Reverse; 27 Spline; 3.73 And Up Dana 30; Reverse Rotation; 27 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; 27 Spline; 3.73 And Up Ratio

27 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in. Rear; 27 Spline

29 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in. Rear; 29 Spline

27 Spline; 3.54 And Up Yukon Dura Grip Positraction; Model 35 / Dana 35 Rear; 27 Spline; 3.54 And Up Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

29 Spline; 1.27 in. Axle Shaft Diameter; 3.08 And Up Ring Gear Pinion Ratio; Rear AMC 20

Incl. Gear Set; For Use w/Dana 35; 3.55/3.73/4.10/4.56/4.88 Gear Ratio

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

29 Spline; 1.21 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.375 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

30 Spline; 3.73 And Up Dana 30; Reverse Rotation; 30 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.73 And Up Ratio; Requires 30 Spline Axles

29 Spline; TracLok

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

30 Spline; 3.92 And Up Dana 44; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

30 Splne;1.15 in. Axl Shft Dia;3.54 And Up Rng Gr Pin Ratio;Dana Spr 35;BeargPN[LM102949];RacePN[LM102911];Uniq. ShimsReqdForCertnApps; Rear Dana 35 Bearing LM102949 and Race LM102911 And Unique Shims Required

AMC 35; 27 Spline; 3.54 And Up AMC Model 35; 27 Spline; 3.54 And Up~Model 35; Yukon Grizzly Locker; 27 Spline; 3.54 And Up

30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

30 Spline AMC Model 35; 30 Spline~Model 35; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.54 And Up; Requeires 30 Spline Axles

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Selectable Full Locker w/Limited Slip; For Use w/3.73-Down Ratio; 30 Spline Dana 44

30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Rear Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60

27 Spline; 1.29 in. Axle Shaft Diameter; 3.08 And Up Ring Gear Pinion Ratio; AMC 20

Gear Ratios- 3.07/3.55; Incl. Gear Set; For Use w/Dana 30

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

Dana 30; 30 Spline; 3.73 Ratio And Up Dana 30; Reverse Rotation; 30 Spline; 3.73 Ratio And Up

30 Spline; 3.54 Ratio And Up AMC Model 35; 30 Spline; 3.54 Ratio And Up

Selectable Full Locker w/Limited Slip; For Use w/3.31-Down Ratio; 27 Spline Dana 35

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.73 and down Confirm axle is not D35. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts.

Axle: 8.25" Chrys Shaft: 1.21" Spline: 29 Ratio: All Confirm axle is not D35.

Axle: D35 Shaft: 1.16" Spline: 27 Ratio: 3.54 and up Confirm axle is not D44. Some models may require ring gear bolt holes to be enlarged due to larger ring gear bolts. No c-clip

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.73 and up

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.54 and down

Axle: D35 Shaft: 1.16" Spline: 27 Ratio: 3.31 and down Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts. No c-clip

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up Confirm axle is not D35. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts.

29 Spline; 1.21 in. Axle Shaft Diameter; Rear 8.375 in.; 2.73 And Up Ring Gear Pinion Ratio

30 Spline; 3.73 Ratio And Down Dana 44; 30 Spline; 3.73 Ratio And Down

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 30 Spline; 3.92 Ratio And Up

Dana 30; 27 Spline; 3.73 Ratio And Up Dana 30; Reverse Rotation; 27 Spline; 3.73 Ratio And Up

27 Spline; 3.54 Ratio And Up AMC Model 35~AMC Model 35; 27 spline axles

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.92-Up Ratio; 30 Spline Dana 44

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 30 Spline Dana 35

27 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; 19821-020 Bearing LM102949 And Racing LM102911 Are Required

30 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Rear 7.56 in. 19822-020 Bearing And LM102911 Race Are Required

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

30 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Dana 30 Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 27 Spline Dana 35

For Use w/3.07 Ratio; Incl. Gear Set; For Use w/Dana 35 w/Trac-Lok