Jeep Comanche Differential Replacement

Dana 25/27/30/44/50 Dana 30; Reverse Rotation~Dana 44~Dana 44; Standard Rotation~Inner slinger

Dana 30/44 Reverse Dana 30; Reverse Rotation~Dana 44~Dana 44; Standard Rotation~Outer slinger

Dana 30; Reverse Rotation

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting AMC Model 35; Bulkhead Quick-Disconnect Fitting~Dana 30; Reverse Rotation; Bulkhead Quick-Disconnect Fitting~Dana 44; Bulkhead Quick-Disconnect Fitting~Dana 44; Standard Rotation; Bulkhead Quick-Disconnect Fitting

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only Applies to Non-Axle Disconnect Style Housings Only

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35

30 Spline; 3.92 And Up; Rear Dana 44 For Use/Non-Thick Ring Gears Only

Dana 30 Reverse; 27 Spline; 3.73 And Up Dana 30; Reverse Rotation; 27 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; 27 Spline; 3.73 And Up Ratio

27 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in. Rear; 27 Spline

27 Spline; 3.54 And Up Yukon Dura Grip Positraction; Model 35 / Dana 35 Rear; 27 Spline; 3.54 And Up Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use/Non-Thick Ring Gears Only

30 Spline; 3.92 And Up Dana 44; 30 Spline; 3.92 And Up~Dana 44; Standard Rotation; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in. Applies to Non-Axle Disconnect Style Housings Only

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only Applies to Non-Axle Disconnect Style Housings Only

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44 Applies to Non-Axle Disconnect Style Housing Only~For Use/Non-Thick Ring Gears Only~Not For Use w/Factory JK

30 Spline; 3.73 And Up Dana 30; Reverse Rotation; 30 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.73 And Up Ratio; Requires 30 Spline Axles

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

30 Splne;1.15 in. Axl Shft Dia;3.54 And Up Rng Gr Pin Ratio;Dana Spr 35;BeargPN[LM102949];RacePN[LM102911];Uniq. ShimsReqdForCertnApps; Rear Dana 35 Bearing LM102949 and Race LM102911 And Unique Shims Required

30 Spline; 3.73 And Down Dana 44; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

AMC 35; 27 Spline; 3.54 And Up AMC Model 35; 27 Spline; 3.54 And Up~Model 35; Yukon Grizzly Locker; 27 Spline; 3.54 And Up

30 Spline AMC Model 35; 30 Spline~Model 35; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.54 And Up; Requeires 30 Spline Axles

30 Spline; 3.92 And Up; Dana 44; Front and Rear Applies to Non-Axle Disconnect Style Housing Only~For Use/Non-Thick Ring Gears Only~Not For Use w/Factory JK

Selectable Full Locker w/Limited Slip; For Use w/3.73-Down Ratio; 30 Spline Dana 44

Dana 30; 30 Spline; 3.73 Ratio And Up Dana 30; Reverse Rotation; 30 Spline; 3.73 Ratio And Up

30 Spline; 3.54 Ratio And Up AMC Model 35; 30 Spline; 3.54 Ratio And Up

Selectable Full Locker w/Limited Slip; For Use w/3.31-Down Ratio; 27 Spline Dana 35

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.73 and down Confirm axle is not D35. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts.

Axle: D44 Shaft: 1.16" Spline: 27 Ratio: 3.54 and up Confirm axle is not D44. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts.

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.73 and up

Axle: D44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up Confirm axle is not D35. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts.

Axle: D44 Shaft: 1.16" Spline: 27 Ratio: 3.31 and down Confirm axle is not D44. Some models may require Air Locker ring gear bolt holes to be enlarged due to larger ring gear bolts.

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.54 and down

30 Spline; 3.73 Ratio And Down Dana 44; 30 Spline; 3.73 Ratio And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 Ratio And Down

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; 30 Spline; 3.92 Ratio And Up~Dana 44; Standard Rotation; 30 Spline; 3.92 Ratio And Up

Dana 30; 27 Spline; 3.73 Ratio And Up Dana 30; Reverse Rotation; 27 Spline; 3.73 Ratio And Up

27 Spline; 3.54 Ratio And Up AMC Model 35~AMC Model 35; 27 spline axles

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.92-Up Ratio; 30 Spline Dana 44

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.73-Up Ratio; 27 Spline Dana 30

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 30 Spline Dana 35

Selectable Full Locker w/Limited Slip; For Use w/3.55-Down Ratio; 27 Spline Dana 30

27 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; 19821-020 Bearing LM102949 And Racing LM102911 Are Required

30 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Rear 7.56 in. 19822-020 Bearing And LM102911 Race Are Required

30 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Dana 30 Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 27 Spline Dana 35