Jeep Comanche Differential Ring and Pinion Replacement

Rear; Dana 35; 10 Cover Bolts; 8 Ring Gear Bolts; 27 Axle Spline; 26 Pinion Spline; Standard Rotation Will Work w/Detroit Locker And TruTrac Only

Front; Dana 30; 10 Cover Bolts; 10 Ring Gear Bolts; 27 Axle Spline; 26 Pinion Spline; Reverse Rotation Will Work w/Detroit Locker And TruTrac Only~Dana 30 Long Reverse Rotation Pinion Applications[Non-Crush Sleeve] Only

Front/Rear; Dana 44; 10 Cover Bolts; 10 Ring Gear Bolts; 30 Axle Spline; 26 Pinion Spline; Standard Rotation

with 4.56 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

with 4.27 Gear Ratio with Dana Model 44 Axle

with 4.10 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

with 4.88 Gear Ratio with Chrysler 8.25 Axle

with 4.56 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.13 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 4.56 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Standard Gear

with 3.54 Gear Ratio with Dana 44 Axle

with 5.13 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.38 Gear Ratio with Dana Model 44 Axle

with 4.56 Gear Ratio with Dana 35 Axle

For Dana 30 Reverse; 4.10 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; High Pinion

For Dana 30; 4.56 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; High Pinion

For Dana 44; 5.13 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.55 Gear Ratio with Chrysler 8.25 Axle

with 3.07 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

For Dana 35; 4.11 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 35; 4.56 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 35; 3.73 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 35; 4.88 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 5.89 Gear Ratio with Dana Model 44 Axle

For Dana 44; 4.27 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.07 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 35; 3.55 Ratio; Requires a 3.54 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 30; 4.88 Ratio; Requires a 3.73 and Numerically Higher Ratio Carrier; High Pinion

For Dana 44; 3.92 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.55 Gear Ratio with Dana 35 Rear Axle

For Dana 44; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 3.73 Gear Ratio with Dana 35 Axle

Dana 30 Axle w/4.10 Axle Ratio

For Dana 44; 4.09 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 5.38 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 4.88 Gear Ratio with Dana 35 Axle

For Dana 44; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 35 Axle w/4.11 Axle Ratio

Dana 35 Axle w/4.88 Axle Ratio

with 4.88 Gear Ratio with Dana Model 30 Axle with Reverse Rotation

with 4.88 Gear Ratio with Dana Model 44 Axle

For Dana 44; 5.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44 Axle w/4.09 Axle Ratio

For Dana 44; 5.38 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 4.88 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 3.92 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

Dana 35 Axle w/3.73 Axle Ratio

Dana 30; Reverse; 4.10 Ratio

For Dana 44; 3.54 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

4.11 Ratio; AMC Model 35 AMC Model 35; 4.11 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; Fits 3.54 & Up Carrier

4.56 Ratio; Unpainted; For Use w/Dana 35

For Chrysler 8.25", 8.375" (C213R/E); 4.10 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance

For AMC 20; 4.10 Ratio; Requires a 3.08 and Numerically Higher Ratio Carrier

For Chrysler 8.25", 8.375" (C213R/E); 3.55 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm

For Chrysler 8.25", 8.375" (C213R/E); 3.90 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm

For Chrysler 8.25", 8.375" (C213R/E); 3.73 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm

For Chrysler 8.25", 8.375" (C213R/E); 4.56 Ratio; Requires a 2.71 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 10mm; Requires Notched Cross Pin 80-0278-1 For Ring Gear Clearance

Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For AMC 20; 4.88 Ratio; Requires a 3.08 and Numerically Higher Ratio Carrier

For AMC 20; 4.56 Ratio; Requires a 3.08 and Numerically Higher Ratio Carrier

For AMC 20; 3.31 Ratio; Requires a 3.08 and Numerically Higher Ratio Carrier

AMC Model 35; 5.13 Ratio AMC Model 35; 5.13 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; Fits 3.54 & Up Carrier

4.88 Ratio; AMC Model 35 AMC Model 35; 4.88 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; Fits 3.54 & Up Carrier

For AMC 20; 3.54 Ratio; Requires a 3.08 and Numerically Higher Ratio Carrier

For AMC 20; 3.73 Ratio; Requires a 3.08 and Numerically Higher Ratio Carrier

For Dana 44; 5.89 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44; 4.88 Ratio Dana 44; 4.88 Ratio~Dana 44; Standard Rotation; 4.88 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

3.73 Ratio; AMC Model 35 Rear AMC Model 35; 3.73 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; Fits 3.54 & Up Carrier

3.55 Ratio AMC Model 35; 3.55 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 3.55 Ratio; Fits 3.54 & Up Carrier

4.56 Ratio AMC Model 35; 4.56 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; Fits 3.54 & Up Carrier

3.07 Ratio AMC Model 35; 3.07 Ratio~Model 35; Standard Rotation; Ring and Pinion Set; 3.07 Ratio; Fits 3.31 & Down Carrier

Dana 44; 3.73 Ratio Dana 44; 3.73 Ratio~Dana 44; Standard Rotation; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 30; Reverse Rotation; 5.13 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 5.13 Ratio~Dana 30; Reverse Rotation; Reverse Rotation; 5.13 Ratio

Dana 30 Reverse; 4.56 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 4.56 Ratio~Dana 30; Reverse Rotation; 4.56 Ratio

Dana 44; 3.08 Ratio~Dana 44; Standard Rotation; 3.08 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.08 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 30 Reverse; 4.88 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 4.88 Ratio~Dana 30; Reverse Rotation; 4.88 Ratio

Dana 44; 3.92 Ratio Dana 44; 3.92 Ratio~Dana 44; Standard Rotation; 3.92 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.92 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set Dana 44; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set~Dana 44; Standard Rotation; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set~Dana 44; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 30 Reverse; 4.11 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio~Dana 30; Reverse Rotation; 4.11 Ratio

Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier~Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier~Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier

Dana 44; 3.54 Ratio Dana 44; 3.54 Ratio~Dana 44; Standard Rotation; 3.54 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 4.11 Ratio Dana 44; 4.11 Ratio~Dana 44; Standard Rotation; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 3.31 Ratio Dana 44; 3.31 Ratio~Dana 44; Standard Rotation; 3.31 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.31 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

3.07 Ratio; Incl. Differential Case/Ring And Pinion/Gears/Rings Bolts

Dana 44; 5.89 Ratio Dana 44; 5.89 Ratio~Dana 44; Standard Rotation; 5.89 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.89 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.13 Ratio Dana 44; 5.13 Ratio~Dana 44; Standard Rotation; 5.13 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

8.25 in. 10 Bolt; 3.21 Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 3.21 Ratio; Double Drilled~Chrysler 8.25 in.; 3.21 Ratio

8.25 in. 10 Bolt; 8.75 in. 12 Bolt; 3.73 Gear Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 3.73 Ratio; Double Drilled~Chrysler 8.25 in.; 3.73 Ratio

8.25 in. 10 Bolt; 4.11 Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 4.11 Ratio; Double Drilled~Chrysler 8.25 in.; 4.11 Ratio

8.25 in. 10 Bolt; 3.90 Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 3.90 Ratio; Double Drilled~Chrysler 8.25 in.; 3.90 Ratio

8.25 in. 10 Bolt; 3.55 Gear Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 3.55 Ratio; Double Drilled~Chrysler 8.25 in.; 3.55 Gear Ratio

8.25 in. 10 Bolt; 4.56 Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 4.56 Ratio; Double Drilled~Chrysler 8.25 in.; 4.56 Ratio

Dana 30 Reverse; 3.73 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 3.73 Ratio~Dana 30; Reverse Rotation; 3.73 Ratio

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set Dana 44; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set~Dana 44; Standard Rotation; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set~Dana 44; Standard Rotation; 4.56 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.38 Ratio Dana 44; 5.38 Ratio~Dana 44; Standard Rotation; 5.38 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 5.13 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For Dana 44; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

8.25 in. 10 Bolt; 4.88 Ratio Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 4.88 Ratio; Double Drilled~Chrysler 8.25 in.; 4.88 Ratio

Dana 30 Reverse; 3.54 Ratio Dana 30 Front; Reverse Rotation; Ring and Pinion Set; 3.54 Ratio~Dana 30; Reverse Rotation; 3.54 Ratio

Fits Chrysler 8.25 in.; 3.07 Ratio; 27 Spline Pinion Chrysler 8.25 in./ C213 Rear; Ring and Pinion Set; 3.07 Ratio; Double Drilled~Chrysler 8.25 in.; Fits Chrysler 3.07 Ratio; 27 Spline Pinion

3.54 Ratio; For Use w/Dana 44

Carrier Break 3.54/3.73 Dana 30 Axle w/3.73 Axle Ratio