Jeep Comanche Drive Axle Shaft Replacement

with OE Version 1.188in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

For Use w/Disconnect Axle

30.35 in. Length; Flanged; For Use w/Dana 35

Condition: Excellent (A)

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

Condition: Excellent (A)
Mileage: 203,200 miles

30 Spline; 29.25 in. Length; For Use w/Dana 44

28.85 in. Length; Flanged; For Use w/Dana 35

For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring

with Dana 30 Axle with Reverse Rotation

30.35 in. Length; For Use w/Dana 35

30 Spline; 29.75 in. Length; For Use w/Dana 44

with Dana 30 Axle with Reverse Rotation

For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall

Dana 44 Axle Does Include Bearing, Seal, or Hardware

28.85 in. Length; For Use w/Dana 35

with 30.54in Shaft Length with Dana 35 Axle with Non ABS

with 29.04in Shaft Length with Dana 35 Axle with Non ABS

For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline

Dana 44 Axle Does Include Bearing, Seal, or Hardware

For Use w/Dana 30 And Dana 30 Reverse

For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 29 in. Long

Dana 35 Axle Does Include Bearing, Seal, or Hardware

with Dana 30 Disconnect Axle

with 22.68in Shaft Length with Dana 30 Axle with Non ABS

Dana 35 Axle Does Include Bearing, Seal, or Hardware

Dana Model 44 Axle

Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset Dana 44; 35 Spline; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bracket Offset~Dana 44; Aftermarket 35 Spline Axle; 26-34 in. Cut To Length; Triple Drilled; For Use w/2.750 in. Bearing Offset

w/o Disconnect; For Use w/Dana 30 And Dana 30 Reverse

Dana Model 44 Axle

with 38.51in Shaft Length with Dana 30 Axle with Non ABS

Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Disconnect Axle

Exc.Disconnecting Axle

w/o ABS; Front

with 2 Snap Ring Grooves at Shaft End with 9.72in Shaft Length with Dana 44 Front Axle

Uni-Ball For 3-Links; Fits JL/JT Aftermarket Diffs [Only] And All JK/TJ/LJ/XJ/MJ/ZJ Stock And Aftermarket Diffs

1.062in Bearing Cap Diameter with 6.11in Shaft Length with Dana 30 Axle

Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly Dana 44; 30 Spline; 4340 Chrome-Moly; 26 in. to 32 in. Cut to Fit Axle; Must Be Cut to the Correct length; Triple Drilled for 5 x 4.5. 5 x 5. & 5 x 5.5 bolt patterns.~Dana 44; 30 Spline; Replacement; 4340 Chrome-Moly