Jeep Grand Cherokee Differential Replacement

Dana 25/27/30/44/50 Dana 30; Crush Sleeve Design~Inner slinger

Dana 30/44 Reverse Dana 30; Crush Sleeve Design~Outer slinger

Dana 30; Crush Sleeve Design

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting AMC Model 35; Bulkhead Quick-Disconnect Fitting~Dana 30; Crush Sleeve Design; Bulkhead Quick-Disconnect Fitting

C200 C200 IFS / Mercedes 8.0 in.; Reverse

Incl. Case/Gear Set; For Use w/8.25 in. 10 Bolt Axle

Gear Ratios- 3.73/4.10/4.56; Incl. Gear Set; For Use w/Dana 30

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

29 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in./ C213 Rear; 29 Spline; w/o Factory Locker

27 Spline; 3.54 And Up Yukon Dura Grip Positraction; Model 35 / Dana 35 Rear; 27 Spline; 3.54 And Up Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

Incl. Gear Set; For Use w/Dana 35

29 Spline; 1.21 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.375 in.

Gear Ratio- 3.07; Incl. Gear Set; For Use w/Dana 35

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

Locking; Incl. Gear Set

30 Spline; 3.73 And Up Dana 30; Crush Sleeve Design; 30 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.73 And Up Ratio; Requires 30 Spline Axles

Dana 30 Reverse; 27 Spline; 3.73 And Up Dana 30; Crush Sleeve Design; 27 Spline; 3.73 And Up~Dana 30; Yukon Grizzly Locker; 27 Spline; 3.73 And Up Ratio

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35; 7.56 in. Ring Gear Dia.

30 Splne;1.15 in. Axl Shft Dia;3.54 And Up Rng Gr Pin Ratio;Dana Spr 35;BeargPN[LM102949];RacePN[LM102911];Uniq. ShimsReqdForCertnApps; Rear Dana 35 Bearing LM102949 and Race LM102911 And Unique Shims Required

AMC 35; 27 Spline; 3.54 And Up AMC Model 35; 27 Spline; 3.54 And Up~Model 35; Yukon Grizzly Locker; 27 Spline; 3.54 And Up

30 Spline AMC Model 35; 30 Spline~Model 35; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.54 And Up; Requeires 30 Spline Axles

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Gear Ratios- 3.07/3.55; Incl. Gear Set; For Use w/Dana 30

Dana 30; 30 Spline; 3.73 Ratio And Up Dana Super 30; 30 Spline; 3.73 Ratio And Up

30 Spline; 3.54 Ratio And Up AMC Model 35; 30 Spline; 3.54 Ratio And Up

Selectable Full Locker w/Limited Slip; For Use w/3.31-Down Ratio; 27 Spline Dana 35

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.73 and up

Axle: D35 Shaft: 1.16" Spline: 27 Ratio: 3.31 and down Confirm axle is 35 not D44A

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.54 and down

Axle: 8.25" Chrys Shaft: 1.21" Spline: 29 Ratio: All Confirm axle is not D44A

Axle: D35 Shaft: 1.16" Spline: 27 Ratio: 3.54 and up Confirm axle is 35 not D44A

Axle: D44A Shaft: 1.31" Spline: 30 Ratio: All Confirm axle is 44A not D35

29 Spline; 1.21 in. Axle Shaft Diameter; Rear 8.375 in.; 2.73 And Up Ring Gear Pinion Ratio

Dana 30; 27 Spline; 3.73 Ratio And Up Dana 30; Crush Sleeve Design; 27 Spline; 3.73 Ratio And Up

27 Spline; 3.54 Ratio And Up AMC Model 35~AMC Model 35; 27 spline axles

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

TracLok; Incl. Gear Set; For Use w/Dana 35

Incl. Internal Parts; For Use w/Dana 44

27 Spline; Dana 30; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio; 7.2 in. Bearing LM102949 and Race LM102911 And Outboard Shims Required

Selectable Full Locker w/Limited Slip; For Use w/3.73-Up Ratio; 27 Spline Dana 30

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 30 Spline Dana 35

Selectable Full Locker w/Limited Slip; For Use w/3.55-Down Ratio; 27 Spline Dana 30

27 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; 19821-020 Bearing LM102949 And Racing LM102911 Are Required

30 Spline; Dana 35; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Rear 7.56 in. 19822-020 Bearing And LM102911 Race Are Required

30 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Dana 30 Bearing LM102949 and Race LM102911 And Outboard Shims Required

Incl. Gear Set; For Use w/Dana 44

Selectable Full Locker w/Limited Slip; For Use w/3.55-Up Ratio; 27 Spline Dana 35