Jeep Grand Cherokee Differential Carrier Replacement

Dana 30 Reverse; Left Hand Thread Dana 30; Crush Sleeve Design; Power Lok Case Bolt; Left Hand Thread

For Dana 30; 3.73 and Higher; Empty Case; Open; Use With Internal Kit 2002914

Dana 30; Reverse; w/Gasket/Shims/Ring Bolts; 2.75 To 3.54 Ratio

Dana 30; Reverse; 3.73 To 5.38 Ratio

Rear; Incl. All Bearings/Shims/Seal/Sleeve/Sealant; For Use w/Dana 35

Case Split 3.54 And Down Except without Spider Gears with Dana Model 30 Axle

One Bearing; Model 35 Reverse IFS; No Return AMC Model 35

Dana 30; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall Dana 30; Bare Standard Open Carrier Case; 3.73 And Up Carrier Break; 1.943 in. Tall~Dana 30; Crush Sleeve Design; Standard; 3.73 And Up Carrier Break; 1.943 in. Tall

Dana 30/Reverse; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall Dana 30; Crush Sleeve Design; Standard; 3.54 And Down Carrier Break; 1.810 in. Tall

Case Split 3.73 And Up Except without Spider Gears with Dana Model 30 Axle

For Use w/Dana Spicer 30 Dana 30; Crush Sleeve Design

Works w/Most Differentials AMC Model 35; Carrier shim driver kit

Dana 35;2.73 To 3.31 Ratio; OE Style

Dana 30/Reverse; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket Dana 30; Bare Standard Open Carrier Case; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket~Dana 30; Crush Sleeve Design; 3.73 And Up; Incl. Carrier Shims; Roll Pinion ;Ring Gear Bolts; Cover Gasket

without Limited Slip Differential Case Split 3.73 And Down Except without Spider Gears with Dana Model 30 Axle

AMC Model 35; Standard Open Bare Case; 1.560 in. Side Gear Bore; 3.31 And Down Carrier Break; Not For 3.27 Carrier Break~AMC Model 35; Standard Open Bare Case; 1.560 in. Side Gear Bore; 3.31 And Down Carrier Break; Not For 3.27 Ratio

Standard Bare Case; For Use w/Dana 30

AMC 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall AMC Model 35; Standard; 3.55 And Up/3.27 Carrier Break; 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall~Model 35; Bare Standard Open Carrier Case; 3.55 And Up Carrier Break (also 3.27 Ratio); 1.560 in. Side Gear Hub Bore; 1 5/8 in. Tall Deck Height

Case Split 3.54 And Up with Dana 35 Axle

Dana 35;3.07 Ratio; Incl. Bolts/Bearings/Shims;

Dana 35; 3.55 To 4.56 Ratio; Incl. Bolts/Bearings/Shims;

w/Trac-Loc; For Use w/Dana 35

TracLoc; 3.54 And Up Carrier Break;1 5/8 in. Tall AMC Model 35; TracLoc; 3.54 And Up Carrier Break;1 5/8 in. Tall

with Spider Gears without Limited Slip Differential Case Split 3.54 And Up Replaces OE Part Number(s) 04740834 with Dana 35 Axle

AMC 35; Standard; Loaded; Incl. Bearings/Shims; 3.54 And Up/3.27 Carrier Break; 1 5/8 in. Tall AMC Model 35; Standard; Loaded; Incl. Bearings/Shims; 3.54 And Up/3.27 Carrier Break; 1 5/8 in. Tall

Dana 35/44;

AMC 35; Standard; Loaded; 3.31 And Down Carrier Break; Not For 3.27 Carrier Break AMC Model 35; Standard; Loaded; 3.31 And Down Carrier Break; Not For 3.27 Carrier Break~Model 35; Standard Open Loaded Carrier Case; with Internal Gears; 27 Spline; 3.31 And Down Carrier Break; Not For 3.27 Carrier Ratio

AMC 35; Standard; Loaded; 3.54 And Up/3.27 Carrier Break AMC Model 35; Standard; Loaded; 3.54 And Up/3.27 Carrier Break

with Spider Gear Case Split 3.31 And Down with Dana 35 Axle with Open Differential

Dana 44; Standard; Loaded; Incl. Spider Gears Dana 44HD; Standard; Loaded; Incl. Spider Gears~Dana 44HD; Standard; Loaded; Incl. Spider Gears; 3/8 in. Bolt Holes

with Spider Gear Case Split 3.54 And Up with Dana Super 35 Axle with Open Differential

with .375in Ring Gear Bolts with Dana 44 Axle with Open Differential

Dana 44HD; Standard; Loaded; Incl. Spider Gears; 7/16 in. Bolt Holes

with Spider Gears Replaces OE Part Number(s) 5183518AA with 12MM X 1.25 Ring Gear Bolts with Dana Super 44 Axle with Open Differential with Spider Gear

with Spider Gears without Limited Slip Differential Case Split 3.73 And Down Replaces OE Part Number(s) 5252590 with Dana Model 30 Axle

with Limited Slip Differential with Spider Gears

with 3.54 Gear Ratio and Up - Loaded with Dana 35 Axle with Trac-Lok

with .438in Bolt Diameter with Dana Model 44 Axle with Open Differential with Spider Gear with Spider Gears

with Limited Slip Differential with Spider Gear Case Split 3.31 And Down Replaces OE Part Number(s) 5252512 with Dana 35 Axle