Condition: Excellent (A)
Mileage: 96,600 miles
Condition: Excellent (A)
Mileage: 55,600 miles
Condition: Excellent (A)
Mileage: 55,600 miles
Condition: Excellent (A)
Mileage: 112,400 miles
Condition: Excellent (A)
Mileage: 41,100 miles
Condition: Excellent (A)
Mileage: 41,100 miles
Condition: Excellent (A)
Mileage: 32,200 miles
Condition: Excellent (A)
Mileage: 32,200 miles
Condition: Excellent (A)
Mileage: 76,800 miles
Condition: Excellent (A)
Mileage: 135,400 miles
Condition: Excellent (A)
Mileage: 145,200 miles
Condition: Excellent (A)
Mileage: 75,000 miles
Condition: Excellent (A)
Mileage: 76,800 miles
It fits vehicles with a 195mm (7.68 inch) ring gear and a 3.6L engine with a single-speed transfer case. This part is designed to work on either the left or right side.
Condition: Excellent (A)
Mileage: 67,500 miles
It fits vehicles with a 195mm (7.68 inch) ring gear and a 3.6L engine with a single-speed transfer case. This part is designed to work on either the left or right side.
Condition: Excellent (A)
Mileage: 67,500 miles
This is a front axle shaft assembly.
Condition: Excellent (A)
Mileage: 123,200 miles
Condition: Excellent (A)
Mileage: 177,800 miles
Condition: Excellent (A)
Mileage: 132,900 miles
It fits 4-door vehicles with the 3.7L engine, 5-speed automatic transmission, and 4-wheel drive. This part is for vehicles without an electronic limited slip differential.
Condition: Excellent (A)
Mileage: 155,900 miles
Condition: Excellent (A)
Condition: Excellent (A)
It fits vehicles with the 3.6L engine and a conventional, non-locking differential. This part is designed to work with both 4x2 and 4x4 wheel drive systems.
Condition: Excellent (A)
Mileage: 83,600 miles
It fits vehicles with the 3.6L engine and a conventional, non-locking differential. This part is designed to work with both 4x2 and 4x4 wheel drive systems.
Condition: Excellent (A)
Mileage: 85,300 miles
It fits vehicles with the 5.7L engine and a 2-speed transfer case. This part is designed to work on either the left or right side.
Condition: Excellent (A)
Mileage: 61,400 miles
It fits vehicles with the 5.7L engine and a 2-speed transfer case. This part is designed to work on either the left or right side.
Condition: Excellent (A)
Mileage: 75,200 miles
Condition: Excellent (A)
Mileage: 49,000 miles
Condition: Excellent (A)
Mileage: 169,600 miles
Condition: Excellent (A)
Mileage: 49,000 miles
Condition: Excellent (A)
Condition: Excellent (A)
Mileage: 69,000 miles
Condition: Good (B)
Mileage: 88,000 miles
It is for 4-door vehicles equipped with a 5.7L engine, 4-wheel drive, and an automatic transmission. This part is for vehicles with an electronic limited slip differential.
Condition: Excellent (A)
Mileage: 212,700 miles
It fits 4-door vehicles with the 5.7L engine, 5-speed automatic transmission, and 4-wheel drive. It is for vehicles equipped with an electronic limited slip differential.
Condition: Excellent (A)
Mileage: 226,400 miles
with 6.11in Shaft Length with Dana 30 Axle 1.188in Bearing Cap Diameter ABS Ring not Included with OE Version
It fits 4-door vehicles with rear-wheel drive, the 3.6L engine, and a 5-speed automatic transmission.
Condition: Excellent (A)
Mileage: 132,000 miles
It fits 4-door vehicles with rear-wheel drive, the 3.6L engine, and a 5-speed automatic transmission.
Condition: Excellent (A)
Mileage: 132,000 miles
It fits vehicles with the 5.7L engine and a 6-speed automatic transmission. It is for 4-door, rear-wheel drive models. This part fits both the right and left sides.
Condition: Excellent (A)
Mileage: 107,900 miles
It fits vehicles with the 5.7L engine and a 6-speed automatic transmission. It is for 4-door, rear-wheel drive models. This part fits both the right and left sides.
Condition: Excellent (A)
Mileage: 107,900 miles
Condition: Excellent (A)
Condition: Excellent (A)
It fits 4-door vehicles with the 5.7L engine and 5-speed automatic transmission. It is for 4-wheel drive vehicles with a 2-speed transfer case (model MP3023). This is a rear axle shaft.
Condition: Excellent (A)
Mileage: 139,900 miles
w/Standard Differential; For Use w/8.25 in. 10 Bolt Axle
w/Standard Differential; For Use w/8.25 in. 10 Bolt Axle
with Dana Model 44 Axle Replaces OE Part Number(s) 4882351 with 30 Splines with Dana 44/216 Axle
with Dana 44 Axle with Dana 44 Axle(s)
with Dana 44 Axle with Hydra Lok
ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle
ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle
with Dana 44 Axle with Hydra Lok
with 30.54in Shaft Length with Dana 35 Axle with Non ABS
with Dana Super 44 Axle Replaces OE Part Number(s) 5012850AA
For Dana 35; 30.54" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; Includes ABS Ring
ABS Ring not Included with 29.04in Shaft Length with Dana 35 Axle
with Dana Super 44 Axle Replaces OE Part Number(s) 5012851AA
with Dana 30 Axle
with Dana 44 Axle
CV Type; w/Vari-Lok; 41.14 in. Length; For Use w/Dana 30
ABS Ring not Included with 30.54in Shaft Length with Dana 35 Axle
For Dana 35; 30.4375" Overall Length; 5 x 5 Lug Pattern; 27 Spline
For Dana 44; 30.25" Overall Length; 5 x 4.5 Lug Pattern; 30 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall
Dana 35 Axle Does Include Bearing, Seal, or Hardware
For Dana 35; 31.8750" Overall Length; 5 x 5 Lug Pattern; 27 Spline
For Dana 35; 29.125" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; Includes ABS Ring
CV Type; w/o Vari-lok; 24.31 in. Length; For Use w/Dana 30
For Dana 44; 29.26" Overall Length; 5 x 4.5 Lug Pattern; 30 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall
CV Type; w/Vari-lok; 23.25 in. Length; For Use w/Dana 30
w/Sales Code DSF (Electronic Limited Slip Differential Rear Axle)
For Dana 35; 30.563" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ready - Does Not Include ABS Ring
CV Type; w/o Vari-Lok; 40.08 in. Length; For Use w/Dana 30
For Use w/Dana 30; CV Joint Type
For Dana 35; 29.04" Overall Length; 5 x 4.5 Lug Pattern; 27 Spline; ABS Ring Not Included - Press Off Old Ring and Reinstall
with Dana 30 Axle
For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline
30.62 in. Length; For Use w/Dana 35
ABS Ring not Included with 30.25in Shaft Length with Dana 35 Axle
Dana 35 Axle Does Include Bearing, Seal, or Hardware
AMC 35; 27 Spline; 1541H Alloy AMC Model 35; 27 Spline; 1541H Alloy
For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 30.62 in. Length
For Use w/Limited Slip Differential
29 in. Length; For Use w/Dana 35
w/Sales Code DSF (Electronic Limited Slip Differential Rear Axle)
with 29.04in Shaft Length with Dana 35 Axle with Non ABS
with Dana Superr 44/226 Axle Replaces OE Part Number(s) 4856333 with 30 Splines with Dana Model 44 Axle
with ABS Ring with Dana 35 Axle with 2.678in O.D. ABS Ring with 29.04in Shaft Length with 54 Teeth
30-1/4 in. Length; For Use w/Dana 44
Dana 35 Axle Does Include Bearing, Seal, or Hardware
w/o Limited Slip Differential
Replaces OE Part Number(s) 4856332 with Dana 44 Axle
with 30.54in Shaft Length with Dana 35 Axle with Non ABS
30.25 in. Length; For Use w/Dana 35/AMC 35
31.74 in. Length; For Use w/Dana 35/AMC 35
For Use w/Dana 35; Incl. Tone Ring And Studs; 27 Spline; 29 in. Long
For Use w/Dana 35; Incl. Tone Ring And Studs; 29 in. Length; 27 Spline
Dana 44 Axle Does Include Bearing, Seal, or Hardware Quadra Drive Vari-Lok
Dana 35 Axle Does Include Bearing, Seal, or Hardware
AMC 35; 27 Spline; 30 11/16 in. Length; w/54 Tooth/3.5 in. ABS Ring AMC Model 35; 27 Spline; 30 11/16 in. Length; w/54 Tooth/3.5 in. ABS Ring
For Use w/Dana 30 And Dana 30 Reverse w/ Cardan-Style Axle
AMC 35; 27 Spline; 29 1/4 in. Length; w/54 Tooth/3.5 in. ABS Ring AMC Model 35; 27 Spline; 29 1/4 in. Length; w/54 Tooth/3.5 in. ABS Ring
Dana 44 Axle Does Include Bearing, Seal, or Hardware Quadra Drive Vari-Lok
Dana 35 Axle Does Include Bearing, Seal, or Hardware
For Use w/Dana 30 And Dana 30 Reverse
with Dana 30 Disconnect Axle
w/Vari-Lok Differential; 32.33 in. Length; For Use w/Dana 44
with Dana 35 Axle with 3.858in O.D. ABS Ring with 30.25in Shaft Length with 48 Tooth ABS Ring
Dana 35 Axle Does Include Bearing, Seal, or Hardware
AMC 35; 27 Spline; 31.74 in.; Bolt In AMC Model 35; 27 Spline; 31.74 in.; Bolt In
with 22.68in Shaft Length with Dana 30 Axle with Non ABS
w/Vari-Lok Differential; 29.34 in. Length; For Use w/Dana 44
29-1/4 in. Length; Left Side 4340 Alloy Steel; High Strength; For Use w/Dana 44
Dana 44 Axle Does Include Bearing, Seal, or Hardware
w/ Dana Model 44 Axle and w/ Vari-Lok Progressive Rear Differential
AMC 35; 30 Spline; 29 3/8 in. Length; For Use w/3.5 in. ABS Ring Dana 44HD; 30 Spline; 29 3/8 in. Length; For Use w/3.5 in. ABS Ring
w/ Dana Model 35 Axle
w/o Disconnect; Cardan Style Axle; For Use w/Dana 30 And Dana 30 Reverse w/ Cardan-Style Shaft
with Dana 35 Axle with 3.858in O.D. ABS Ring with 31.74in Shaft Length with 48 Tooth ABS Ring
w/ Dana Model 35 Axle
Replaces OE Part Number(s) 04874307 with ABS with Dana 30 Axle
AMC 35; Dana 30; CV-Style; 27 Spline; 38.51 in. Length Dana 30; Crush Sleeve Design; CV-Style; 27 Spline; 38.51 in. Length
with 54 Teeth with ABS Ring Replaces OE Part Number(s) 04713193 with 2.678in O.D. ABS Ring with 30.54in Shaft Length with Dana 35 Axle
AMC 35; 27 Spline; 30.93 in. Length AMC Model 35; 27 Spline; 30.93 in. Length
Replaces OE Part Number(s) 4856333 with Dana 44 Axle
AMC 35; 30 Spline; 30 3/8 in. Length; For Use w/3.5 in. ABS Ring Dana 44HD; 30 Spline; 30 3/8 in. Length; For Use w/3.5 in. ABS Ring
with Dana 44 Axle with Hydra Lok
AMC 35; 27 Spline; 31.74 in. Length AMC Model 35; 27 Spline; 31.74 in. Length
with Dana Super 44 Axle Replaces OE Part Number(s) 5012851AA
29-1/4 in. Length; Right Side 4340 Alloy Steel; High Strength; For Use w/Dana 44
with ABS Ring with Dana 35 Axle with 3.464in O.D. ABS Ring with 30.54in Shaft Length with 54 Teeth
with Dana Super 44 Axle Replaces OE Part Number(s) 5012850AA
w/ Dana Model 44 Axle and w/ Trac-Lok Rear Differential
Dana 44; 30 Spline; 29.25 in. Length Dana 44HD; 30 Spline; 29.25 in. Length
with Dana 44 Axle with Hydra Lok
with 38.51in Shaft Length with Dana 30 Axle with Non ABS
Dana 44; 30 Spline; 30.25 in. Length Dana 44HD; 30 Spline; 30.25 in. Length
w/ Dana Model 44 Axle and w/ Trac-Lok Rear Differential
Replaces OE Part Number(s) 04874306 with ABS with Dana 30 Axle
Replaces OE Part Number(s) 04797135 with 21.91in Shaft Length with Dana 30 Disconnect Axle
with ABS Ring with Dana 35 Axle with 29.04in Shaft Length with 3.464in O.D. ABS Ring with 54 Teeth
Dana 44; 30 Spline; 32.25 in. Length Dana 44HD; 30 Spline; 32.25 in. Length
AMC 35; 30 Spline; 31.75 in. Length Dana 44HD; 30 Spline; 31.75 in. Length
Fits Standard Or TracLok; 30.34 in. Length; For Use w/Dana 44
Dana 30; AMC 35; 27 Spline; 32.4 in. Length; For Use w/ABS Ring Dana 30; Crush Sleeve Design; 27 Spline; 32.4 in. Length; For Use w/ABS Ring
Replaces OE Part Number(s) 04797134 with ABS with Dana 30 Axle
Condition: Excellent (A)
It is a CV type axle shaft.
Condition: Excellent (A)
Condition: Excellent (A)
Mileage: 69,000 miles
It fits vehicles with the 6.2L engine and 4-wheel drive (4X4).
Condition: Excellent (A)
Mileage: 98,000 miles
It fits 4-door vehicles with 4-wheel drive, the 5.7L engine, and a 5-speed automatic transmission. This is a rear axle shaft.
Condition: Excellent (A)
Mileage: 139,900 miles
It fits 4-door vehicles equipped with a 3.7L engine and a 5-speed automatic transmission. This axle shaft is for 4-wheel drive vehicles without an electronic limited slip differential.
Condition: Excellent (A)
Mileage: 155,900 miles
Condition: Excellent (A)
Mileage: 12,000 miles
Condition: Excellent (A)
Mileage: 39,000 miles
Uni-Ball For 3-Links; Fits JL/JT Aftermarket Diffs [Only] And All JK/TJ/LJ/XJ/MJ/ZJ Stock And Aftermarket Diffs
Replaces OE Part Number(s) 4728984 with ABS Ring
with Dana 30 Axle 1.062in Bearing Cap Diameter with 6.11in Shaft Length
It is for 4x4 vehicles with a 230mm ring gear and an electronic locking differential (ELD).
Condition: Excellent (A)
Mileage: 69,000 miles
It is for 4x4 vehicles with a 230mm ring gear and an electronic locking differential (ELD).
Condition: Excellent (A)
Mileage: 69,000 miles
It fits vehicles with the 6.2L engine and 4-wheel drive (4X4).
Condition: Excellent (A)
Mileage: 98,000 miles
Condition: Excellent (A)
Mileage: 41,100 miles
Dana 30/30 Reverse; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints Dana 30; Crush Sleeve Design; Replacement 27 Spline 4340 Chrome-Moly; w/Super Joints~Dana 30; Front Axle Kit; 4340 Chrome-Moly Upgrade; Includes 27 Spline Inner and Outer Shafts. Disconnect Block Off Kit. and Yukon Super Joints.
Browse our selection of quality drive axle shaft parts designed specifically for your Jeep Grand Cherokee. We carry options across multiple trim levels, body styles, and engine configurations to ensure a perfect fit.
30th Anniversary 4xe · 4xe · 5.9 Limited · 65th Anniversary Edition · 75th Anniversary · 80th Anniversary · Altitude · Altitude 4xe · Altitude X · Anniversary Edition 4xe · Base · Blindada · High Altitude · Laredo · Laredo A · Laredo E · Laredo X · Limited · Limited Lujo · Limited Lujo Advance · Limited Lujo V8 · Limited Premium · Limited Reserve 4xe · Limited X · North Edition · Orvis · Overland · Overland 4xe · Overland Summit · S Limited · SE · SRT · SRT8 · Special Edition · Sport · Summit · Summit 4xe · Summit Elite Platinum · Summit Reserve · Summit Reserve 4xe · TSi · Trackhawk · Trailhawk · Trailhawk 4xe · Upland
SUV · Sport Utility
L4 2.0L · L6 4.0L · V6 3.0L · V6 3.6L · V6 3.7L · V8 4.7L · V8 5.2L · V8 5.7L · V8 5.9L · V8 6.1L · V8 6.2L · V8 6.4L
Automatic · Manual
