Jeep Grand Cherokee Drive Axle Shaft Seal Replacement

Dana 44; Outer

For Dana 30 27-Spline Front Axle; 1.125 in. I.D.; 2.132 in. O.D.; Replaces O.E. PN[8121781]

1.693 Shaft Diameter 3.268 Bore Diameter 3.278 Outside Diameter Seal 0.413 Width

1.375 Shaft Diameter 2.235 Bore Diameter 2.239 Outside Diameter Seal 0.313 Width

FAG Global Number 413 6677 100

FAG Global Number 413 2425 100

with 7.875 (in) Ring Gear with Chrysler C200F Differential Independent Front Suspension

with 7.125 (in) Ring Gear with Disconnect with Spicer 30-AF Axle

with 7.875 (in) Ring Gear with Chrysler C200F Differential Independent Front Suspension

1.756 Shaft Diameter 2.952 Bore Diameter 2.960 Outside Diameter Seal 0.352 Width with 195 Ring Gear

with 7.125 (in) Ring Gear with Spicer 30-AF Axle

For Intermediate Shaft

For Intermediate Shaft

For Use w/[5707/1563] Bearing AMC Model 35; For Use w/[5707/1563] Bearing

with Dana 30 Axle

Dana 30; Inner

Dana 30/Reverse; Replacement; 2.125 in. OD Dana 30; Crush Sleeve Design; Replacement; 2.125 in. OD

1.192 Shaft Diameter 2.122 Bore Diameter 2.128 Outside Diameter Seal 0.350 Width ; w/o Disconnect Axle

w/Disconnect Seals Fits Both Sides; w/Disconnect Axle Fits

Replacement Axle Seal; Super Model 35; Super Dana 44; Bolt-In AMC Model 35~Dana 44HD

w/o Disconnect Axle FAG Global Number 413 2297 100

Replaces OE Part Number(s) 04856336 with Dana 35 Rear Axle

Dana/Spicer 30 Axle

For Use w/Dana 35 And Dana 44

SEAL, Axle Drive Shaft

1.850 Shaft Diameter 4.213 Bore Diameter 4.224 Outside Diameter Seal 0.445 Width ; 215mm Axle

Pinion Seal

Replaces OE Part Number(s) 8133612 with Dana 44 Rear Axle

For Use w/Dana 35 And Dana 44

AMC 35 AMC Model 35

w/225mm Rear Axle

Dana 35;

At Diff Housing w/215mm Rear Axle

For Use w/Dana 30/44/60; No Return Inner axle side seal installation tool