Jeep Grand Cherokee Drive Shaft Replacement

It fits vehicles equipped with a single speed transfer case (model MP3010).

Condition: Excellent (A)
Mileage: 39,000 miles

It is for vehicles with a 3.6L engine and a single speed transfer case (model MP3010).

Condition: Excellent (A)
Mileage: 116,600 miles

It fits vehicles with the 5.7L engine and a 2-speed transfer case (model MP3023).

Condition: Excellent (A)
Mileage: 82,500 miles

It fits 4-door vehicles with the 4.7L engine, 5-speed automatic transmission, and 4-wheel drive. This part features a rear double U-joint.

Condition: Excellent (A)
Mileage: 324,300 miles

Condition: Excellent (A)
Mileage: 230,200 miles

It fits 4-door vehicles with a 3.7L engine, 5-speed automatic transmission, and 4x4 drive. It is compatible with vehicles equipped with the New Venture 140 transfer case (Quadra-Trac I).

Condition: Excellent (A)
Mileage: 168,300 miles

It is for vehicles with the 2.0L engine.

Condition: Excellent (A)
Mileage: 32,200 miles

It fits vehicles equipped with a 2-speed transfer case (model MP3023).

Condition: Excellent (A)
Mileage: 49,000 miles

It fits vehicles with the 6.4L engine.

Condition: Excellent (A)
Mileage: 138,600 miles

33.25 in. Collapsed Length

Quadra-Trac II Full-Time Active 4WD

w/Sales Code DHZ (Transer Case - Single Mode 4WD)

GKN CV at both ends

Quadra-Trac I Full-Time 4WD

NV245 Quadra-Trac II Transfer Case w/Sales Code DHX (Quadra-Trac II Full-Time Active 4WD)

GKN CV and U-Joint on Opposite End

with 30.47 (in) Long Driveshaft Measurement taken from end of flange face to end of CV joint flange face with Quadra Trac l Supplied as New

Sales Code DHF (Quadra-Trac II On Demand 4WD System) Sales Code DRM (Dana 35/194 mm Axle) w/10 Bolt Differential Cover

w/ Quadra-Trac ll 4WD System

CV Joint At Transfer Case End; Flanged U-Joint At Axle End

CV Joint At Transfer Case End; U-Joint at Axle End; For Vehicles Manufactured After 12-13-2000

U-Joint at Front Yoke

It is for vehicles with the 6.2L engine and 4x4 four-wheel drive.

Condition: Excellent (A)
Mileage: 98,000 miles

GKN CV and U-Joint on Opposite End

Sales Code DHF (Quadra-Trac II On Demand 4WD System) w/10 Bolt Differential Cover w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))

w/Sales Code DRM (Dana 35C/194 mm Rear Axle)

with 34.02 (in) Long Driveshaft Measurement taken from end of flange face to end of CV joint flange face with Quadra Trac II Supplied as New

with 26.50 (in) Long Driveshaft with 2 Speed Transfer Case Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

with 31.34 (in) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

To 11/01/95 w/Constant Velocity Joint

From 11/01/95

Dust Boot Not Included Sales Code DHP (Select-Trac Full Time 4WD) w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))

GKN CV at both ends

w/Quadra-Drive

with 32.40 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))

Sales Code DHR (Quadra-Trac On Demand 4WD System) w/Sales Code DRK (Dana 44 Axle (226 mm Ring Gear))

249 Transfer Case

w/Constant Velocity Joint

CV Joint at Front Yoke

with 30.47 (in) Long Driveshaft with 231 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

NV140 Transfer Case w/Sales Code DHB (Quadra-Trac Active On Demand 4WD)

Dust Boot Not Included Sales Code DHP (Select-Trac Full Time 4WD) Sales Code DRM (Dana 35/194 mm Axle)

This is a BRAND NEW part. It features front and rear constant velocity (CV) joints.

Condition: Excellent (A)

w/Sales Code DHY (Single Speed Transfer Case)

3 U-Joints w/Double Cardan at Transfer Case

w/242 Transfer Case

GKN CV at both ends

GKN CV at both ends

with 32.91 (in) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

with 31.89 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

w/Sales Code DHP (Selec-Trac Full Time 4WD System)

GKN CV and U-Joint on Opposite End

w/Sales Code DJS (Next Gen. Dana 44 HD Front Axle)

with 30.71 (in) Long Driveshaft with 242 Transfer Case with Dana Model 30 Axle Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

Production: 12/13/2000-

31.25 in. Collapsed Length; w/CV Joint

Incl. CV Joint

w/Quadra-Trac II 4WD System w/NV245 Transfer Case

with 33.50 (in) Long Driveshaft Measurement taken from the CV face to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft Supplied as New

Double U-joint at Transfer Case Sales Code DHP (Select-Trac Full Time 4WD) To 11/01/95 U-Joint at Front Differential

Sales Code DHF (Quadra-Trac II On Demand 4WD System)

with 30.31 (in) Long Driveshaft Measurement taken from end of CV joint flange face to end of CV joint flange face Supplied as New

From 11/01/95 Sales Code DHR (Quadra-Trac On Demand 4WD System)

Sales Code DHX (Quadra-Trac II Full Time Active 4WD)

w/Sales Code DHB (Quadra-Trac Active On Demand 4WD)

32.875 in. Collapsed Length NP249J

w/215 mm Rear Axle w/Sales Code DHY (Single Speed Transfer Case)

w/225 mm Rear Axle

w/Sales Code DPP (215 mm Rear Axle)

w/Sales Code DR1 (230 mm Rear Axle) w/Sales Code DS8 (Conventional Differential Rear Axle)

w/Sales Code DKA (2 Speed On Demand Transfer Case) w/Sales Code DRH (195 mm Rear Axle)

w/Sales Code DR1 (230 mm Rear Axle)

w/Sales Code DR1 (230 mm Rear Axle)

w/195 mm Rear Axle w/Sales Code DHY (Single Speed Transfer Case)

w/Sales Code DKA (2 Speed On Demand Transfer Case) w/Sales Code DPP (215 mm Rear Axle)

w/Sales Code DR1 (230 mm Rear Axle)

33.5 in. Collapsed Length NP249J

31.25 in. Collapsed Length NP249J

w/o CV Style Joint; w/A500 NP242J

w/Sales Code DPR (225 mm Rear Axle)

w/Sales Code DR1 (230 mm Rear Axle) w/Sales Code DSF (Electronic Limited Slip Differential Rear Axle)

w/o CV Joint

30.530 in. Collapsed Length