Jeep Liberty Differential Replacement

Dana 30/44 Reverse Dana Super 30~Outer slinger

Dana 25/27/30/44/50 Dana Super 30~Inner slinger

Dana 30; Replacement Dana Super 30; Replacement

Incl. Case/Gear Set; For Use w/8.25 in. 10 Bolt Axle

Incl. Inner Components And Pressure Plate; For Use w/Dana 30 w/ 3.73 Ratio

Incl. PN[5066530AA]

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear; Dana 30/Reverse; Applies To Non-Disconnect Only

27 Spline; 1.18 in. Axle Shaft Diameter; 3.54 And Up Ring Gear Pinion Ratio; Dana 35

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up; Rear Dana 44 For Use Of Non-Thick Ring Gears

w/Tag # 52111418AB; For Use w/Dana 35

29 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in. Rear; 29 Spline

27 Spline; 3.54 And Up Yukon Dura Grip Positraction; Model 35 / Dana 35 Rear; 27 Spline; 3.54 And Up Ratios

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 44 For Use Of Non-Thick Ring Gears

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

29 Spline; 1.21 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.375 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Applies To Disconnect Only; Dana 30/Reverse; 7.2 in.

27 Spline; 1.16 in. Axle Shaft Diameter; 3.54 And Down Ring Gear Pinion Ratio;Rear ; Dana 30/Reverse; Applies To Non-Disconnect Only

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

29 Spline; TracLok

AMC 35; 27 Spline; 3.54 And Up AMC Model 35; 27 Spline; 3.54 And Up~Model 35; Yukon Grizzly Locker; 27 Spline; 3.54 And Up

30 Spline AMC Model 35; 30 Spline~Model 35; Yukon Grizzly Locker; Aftermarket 30 Spline Upgrade; 3.54 And Up; Requeires 30 Spline Axles

30 Spline; 3.92 And Up; Dana 44; Front and Rear

Dana 30; 30 Spline; 3.73 Ratio And Up Dana Super 30; 30 Spline; 3.73 Ratio And Up

30 Spline; 3.54 Ratio And Up AMC Model 35; 30 Spline; 3.54 Ratio And Up

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.54 and down

Axle: D30 7.2" Shaft: 1.16" Spline: 27 Ratio: 3.73 and up

Axle: 8.25" Chrys Shaft: 1.21" Spline: 29 Ratio: All

29 Spline; 1.21 in. Axle Shaft Diameter; Rear 8.375 in.; 2.73 And Up Ring Gear Pinion Ratio

Dana 30; 27 Spline; 3.73 Ratio And Up Dana Super 30; 27 Spline; 3.73 Ratio And Up

27 Spline; 3.54 Ratio And Up AMC Model 35~AMC Model 35; 27 spline axles

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Selectable Full Locker w/Limited Slip; For Use w/3.73-Up Ratio; 27 Spline Dana 30

Selectable Full Locker w/Limited Slip; For Use w/3.55-Down Ratio; 27 Spline Dana 30